编队对地攻击作战效能分析

以马尔可夫理论为基础,运用全概率公式建立了飞机编队对地攻击的动态模型;评估了任务成功率等作战效能指标;给出了飞机对地攻击作战效能的计算实例。结果表明所建模型客观描述了对地攻击作战的实质。     

基于信息熵的舰艇编队反导作战效能

介绍了利用信息熵描述交战网络中信息总量的方法。根据作战任务实际完成时间与期望完成时间之间的关系描述了信息传递的质量。说明提高网络中信息总量可以缩小反舰导弹所在的不确定区域;提高信息传递质量可以提高舰艇编队反导作战预警雷达的探测概率,并结合具体作战想定给出实例仿真结果。     

基于伴随非等温射流理论的缝槽气膜冷却模型

在伴随非等温射流基础上发展了一种适用于缝槽气膜冷却绝热温比预估的数学模型.通过合理假设推导出二维壁面射流混合层核心温度分布规律,将其作为气膜绝热壁温,并考虑缝槽几何特征参数和气膜吹风比对冷却效率的影响,得到绝热温比计算公式.用试验数据对该预估模型进行拟合分析,得到了与试验数据拟合精度在±8%以内的半经验预估模型,证明该模型的可行性和应用潜力,并需要更多的试验数据对其进行验证和改进.      

Operating characteristics of a high radius pre-swirl cooling system

An experimental investigation into pre-swirl effectiveness and receiver hole discharge coefficient characteristics for a high radius injection pre-swirl cooling systems was carried out on a physically representative experimental rig with a 450 mm diameter rotor.The receiver holes and pre-swirl nozzle were located at a radius of 181 mm and 180 mm respectively.The experimental work was mainly conducted at 5 000～12 000 r/min,4 bar absolute pressure and 1.132 kg/s air supply.The maximum air supply temperature was 190 ℃.Pressure and temperature distributions in the pre-swirl system were examined with an emphasis on the velocity effectiveness of the pre-swirl system as a whole and on the discharge coefficients of the rotating 'receiver holes' in the rotor.The results showed that the velocity effectiveness increased with increasing swirl ratio resulting in reduced blade cooling flow temperature.Different seal flow configurations caused very different effectiveness at different speeds,but outflow through the inner and outer seals always gave the highest effectiveness compared other configurations.Increasing the seal flow rate reduced the effectiveness.For the coefficient of discharge,except for the low speed range,it increased with increase in swirl ratio for most speeds.      

温度边界层对壁湍流多尺度相干结构的影响

用热线风速仪以高于对应最小湍流时间尺度的分辨率精细测量了风洞中壁面加热平板湍流边界层不同法向位置流向速度分量的时间序列信号, 与常温情况相比, 热对流加速了壁湍流中流体的动量、质量和能量的交换, 加快了湍流边界层的发展;用子波分析方法研究了壁面加热对壁湍流多尺度相干结构喷射和扫掠条件相位平均波形的影响, 显示热对流明显增大了缓冲层相干结构扫掠过程和喷射过程的强度, 是增强壁湍流中流体的动量、质量和能量交换的根本原因.      

Microstructure and Optical Characterization of Magnetron Sputtered NbN Thin Films

Some fundamental studies on the preparation, structure and optical properties of NbN films were carried out. NbN thin films were deposited by DC reactive magnetron sputtering at different N2 partial pressures and different substrate temperatures ranging from –50 ℃ to 600 ℃. X-ray diffraction analysis (XRD) and scanning electron microscopy (SEM) were employed to characterize their phase com- ponents, microstructures, grain sizes and surface morphology. Optical properties inclusive of refractive indexes, extinction coefficients and transmittance of the NbN films under different sputtering conditions were measured. With the increase in the N2 partial pressure, δ-NbN phase structure gets forming and the grain size and lattice constant of the cubic NbN increasing. The deposited NbN film has relatively high values of refractive index and extinction coefficient in the wavelength ranging from 240 nm to 830 nm. Substrate tem- perature exerts notable influences on the microstructure and optical transmittance of the NbN films. The grain sizes of the δ-NbN film remarkably increase with the rise of the substrate temperature, while the transmittance of the films with the same thickness decreases. Ultra-fine granular film with particle size of several nanometers forms when the substrate is cooled to –50 ℃, and a remarkable aug- mentation of transmittance could be noticed under so low a temperature.     

Autonomous Control Reconfiguration of Aerospace Vehicle Based on Control Effectiveness Estimation

未来空天飞行器跨空天两域飞行,要求有较高的自主性以适应由故障和环境变化带来的不确定因素。针对空天飞行器的不确定性,提出了自主控制重构方案。研究了线性模型的时变控制效益的估计方法,提出并证明了效益矩阵可估计的充分条件,给出了相应的算法并证明了其收敛性和对噪声的鲁棒性;提出了基于线性规划和模糊逻辑的控制分配算法,通过冗余效应器实现了不确定条件下的自主控制重构。系统集成和仿真结果分析验证了方案和算法的有效性。     

正撞击下双层墙结构防护屏防护性能仿真研究

文章利用AUTODYN软件对铝合金球形弹丸正撞击双层墙防护结构进行了仿真研究,比较了双层墙防护结构中铝合金材料和复合材料防护屏的防护性能。结果表明:在相同的面密度和构型下,双层墙防护结构中铝合金防护屏的防护效果优于复合材料防护屏。     

地球同步轨道薄膜太阳帆的姿态轨道控制方法

薄膜太阳帆（FSS）是集推进、发电和姿轨控功能于一体化的超大型挠性太阳帆式航天器,通过调整薄膜反射率产生可变推力和力矩,实现其姿态和轨道运动控制。结合薄膜太阳帆在地球同步轨道运行时的受力特性进行了轨道漂移分析。通过建立薄膜太阳帆动力学模型及受力模型,提出了调整帆面角度轨道修正方法以及基于薄膜光压力矩角动量卸载的长期在轨对日定向面内双轴动量轮稳定控制方法。通过系统仿真验证表明所提的轨道修正和对日定向控制方法是合理有效的,可使薄膜太阳帆长期在定点位置维持对日定向。     

基于改进FCM的北斗三频组合观测值选取

以北斗卫星导航系统三频双差为基础探讨了组合观测值及误差,针对以往采用聚类方法在研究GPS三频组合数据过程中的不足,提出了基于距离修正的增量模糊C均值算法.通过调节因子有效地修正了样本中心与聚类中心的距离,获得合理的隶属度,从而得到正确的分类;构造了基于距离修正的聚类有效性指标,自动获取最佳聚类数,避免了人为确定聚类数的不合理性;在此基础上引入增量的思想,数据增加时以原有的数据集为基础,根据阈值进行归类,不需要重新进行初始计算.通过矩阵变换法及实例验证了该方法的可行性和可靠性.