Adaptive predefined-time control for liquid-filled flexible spacecraft attitude stabilization during orbit maneuver

A predefined-time attitude stabilization for complex structure spacecraft with liquid sloshing and flexible vibration is investigated under input saturation during orbital maneuver. First, the attitude dynamics model of liquid-filled flexible spacecraft is constructed. Meanwhile, the influence of solar panel vibration and liquid sloshing is treated as a disturbance in the controller design. Next, an adaptive predefined-time control scheme is proposed by applying sliding mode control theory. A predefined-time convergent sliding surface and reaching law are designed to ensure the predefined-time fast convergence rate. Furthermore, a novel adaptive algorithm is developed to handle the disturbances from liquid sloshing and flexible vibration, ensuring that the system converges to a small neighborhood of the equilibrium. Additionally, a new auxiliary system is constructed to deal with the effects of input saturation. At last, one simulation case is performed to verify the feasibility and advantages of the proposed algorithm.     

星光折射连续修正方法及制导规划

针对星光折射模型本身固有的缺点，对星光折射连续修正方法进行了研究，该方法首先探索折射星的分布规律，而后采用Unscented卡尔曼滤波算法+多星连续观测的方案实现定位。同时，对可用星与选星要素和基于突防规划的星光制导弹道设计两方面进行了研究，在星光制导制约机理研究的基础上，提出了惯性/星光制导规划方法，该方法包括导航星的优选策略、导航星优选技术和星点位置的精确计算3步。最后，介绍了星光制导系统的系统组成和功能原理。     

Numerical investigation on flow field characteristics of dual synthetic cold/hot jets using POD and DMD methods

In order to improve the control ability of synthetic jets in compressible boundary layer, a novel control method based on dual synthetic cold/hot jets coupled control of velocity profile and temperature profile was proposed. As fundamental investigations on the effects of synthetic jet temperature on the jet behavior and flow field characteristics were essentially necessary, preliminary numerical simulations were conducted to study the influence of temperature (200 K and 400 K) on the flow field characteristics of synthetic jets using Large Eddy Simulations (LES) model. Time-averaged flow fields showed that different temperatures led to variable behavior of two strands of jets. For dual synthetic cold jets, a potential-core arose apparently with its height ranging from 0.01 to 0.03 m, while for dual synthetic hot jets, two strands of jets emerged downstream. The modal decomposition of instantaneous flow fields had been done using both Proper Orthogonal Decomposition (POD) and Dynamic Mode Decomposition (DMD). Various modes showed different characteristics of the flow fields. As the POD method focuses on the energy of flow while the DMD method focuses on the frequency, the first two modes had many similarities, but the third and fourth modes demonstrated completely different vortex structures. The current researches play a role of preliminary investigations for further and comprehensive exploration of novel flow control measures in global velocity field.     

放宽静稳定度飞机时间延迟稳定边界

针对飞机初步设计阶段其放宽静稳定度（RSS）与电传飞控系统时间延迟边界之间的定量关系求解问题，以战斗机纵向短周期方程为基础，分析了飞控系统中的时间延迟因素，描述了放宽静稳定度与方程参数间的关系。并以等效输入延迟的形式构建了含飞控系统时间延迟的闭环系统特征方程，通过根轨迹趋势理论和数值计算方法确定了放宽静稳定度与飞控系统时间延迟边界的定量数值关系，同时探讨了舵效与动导的参数不确定性对所求时间延迟边界的影响。本文方法对飞机初步设计阶段飞控系统时间延迟指标和可放宽静稳定度边界的确定具有一定的工程实践意义。     

基于单参数迭代的TAEM在线轨迹生成方法

针对大升力体轨道再入飞行器末端能量管理（TAEM）段制导控制能力强、末端约束不惟一的问题，将TAEM段分为动压跟踪和着陆预备2个阶段，设计了不同的纵向轨迹剖面，从而将TAEM段在线轨迹生成问题转化为单参数搜索问题。第1阶段设计标称动压剖面为纵向参考轨迹，使得飞行器过程约束得到保证。第2阶段纵向剖面设计为标称高度剖面，从而使得末端点高度和倾角约束得到保证。根据末端动压误差设计修正律，迭代修正第一阶段动压剖面，从而使得最终的纵向轨迹满足所有的状态约束。在线轨迹递推采用以时间为自变量的数值积分，递推过程引入闭环制导律，通过实时修正攻角跟踪纵向剖面，修正倾侧角跟踪地面轨迹，从而保证在线生成的轨迹符合物理特性，降低闭环制导难度。在考虑初期再入末端大范围状态散布情况下，数值仿真显示了所提算法的鲁棒性。     

Optimal steering law of refractive sail

The interaction between electromagnetic waves and matter is the working principle of a photon-propelled spacecraft, which extracts momentum from the solar radiation to obtain a propulsive acceleration. An example is offered by solar sails, which use a thin membrane to reflect the impinging photons. The solar radiation momentum may actually be transferred to matter by means of various optical phenomena, such as absorption, emission, or refraction. This paper deals with the novel concept of a refractive sail, through which the Sun’s light is refracted by crossing a film made of polymeric micro-prisms. The main feature of a refractive sail is to give a large transverse component of thrust even when the sail nominal plane is orthogonal to the Sun-spacecraft line. Starting from the recent literature results, this paper proposes a semi-analytical thrust model that estimates the characteristics of the propulsive acceleration vector as a function of the sail attitude angles. Such a mathematical model is then used to analyze a simplified Earth-Mars and Earth-Venus interplanetary transfer within an optimal framework.     

Command filtered sliding mode trajectory tracking control for unmanned airships based on RBFNN approximation

This paper presents two sliding mode controllers to address the trajectory tracking problem of unmanned airships in the presence of unknown wind disturbance. The sliding mode controller proposed first is designed by a fast power rate reaching law(FPRRL). The disturbance is compensated by a radial basis function neural network (RBFNN). To avoid the aggressive adaptation, the controller is augmented by a command filter. The controller provides good robustness and tracking performance with no chattering under the hypothesis of ideal wind field. However, serious chattering occurs when simulation is performed under discontinuous wind field. To simulate the wind in practice, the wind field employed in the simulation is generated by the combination of a constant field and white noise. The controller is improved subsequently with an extended model to suppress the chattering induced by the white noise. The enhanced controller manipulates the derivation of system input, thus attenuating the chattering. Stability analysis shows that both controllers drive the tracking error into a controllable small region near zero. Simulations are provided to validate the performance of the proposed controllers under different wind hypothesis.     

复合材料MMB试件I-II混合型层间裂纹扩展分析

基于经典层合板理论及双线性黏聚区本构关系，建立了含一般分层裂纹层合板的理论模型，对I-Ⅱ混合型弯曲（MMB）断裂试件进行了裂纹扩展理论分析。提出了一种I-Ⅱ混合型断裂叠加模型，引入I型裂纹分量的刚体转动位移，同时考虑了裂纹长度超过试件半长后中部载荷分量对裂纹扩展的闭合效应，并根据黏聚区力学响应，分段获得了位移函数通解。结合叠加模型的边界条件与连续性条件，分析了MMB试件的裂纹扩展过程，求解获得了载荷-位移曲线。通过与梁模型预测以及试验结果进行对比，验证了本文模型对I-Ⅱ混合型裂纹扩展预测的有效性和准确性，并讨论了初始断裂模式混合比及闭合效应对裂纹扩展过程的影响。结果表明：初始Ⅱ型裂纹比重较大时，中部载荷的闭合效应更为明显，可能出现I型裂纹完全闭合的情况；裂纹扩展过程中，当裂纹长度小于试件半长时，断裂混合比基本保持常数；当裂纹扩展超过试件半长后，闭合效应明显，混合裂纹形式逐渐向单一型断裂模式退化。     

Shape control of spacecraft formation using a virtual spring-damper mesh

This paper derives a distance-based formation control method to maintain the desired formation shape for spacecraft in a gravitational potential field. The method is an analogy of a vir-tual spring-damper mesh. Spacecraft are connected virtually by spring-damper pairs. Convergence analysis is performed using the energy method. Approximate expressions for the distance errors and control accelerations at steady state are derived by using algebraic graph representations and results of graph rigidity. Analytical results indicate that if the underlying graph of the mesh is rigid, the convergence to a static shape is assured, and higher formation control precision can be achieved by increasing the elastic coefficient without increasing the control accelerations. A numerical exam-ple of spacecraft formation in low Earth orbit confirms the theoretical analysis and shows that the desired formation shape can be well achieved using the presented method, whereas the orientation of the formation can be kept pointing to the center of the Earth by the gravity gradient. The method is decentralized, and uses only relative measurement information. Constructing a distributed virtual structure in space can be the general application area. The proposed method can serve as an active shape control law for the spacecraft formations using propellantless internal forces.     

Cooperative guidance of seeker-less missile considering localization error

To perform an accurate fire-and-forget attack of seeker-less missile with the consideration of the localization error, a new cooperative guidance strategy of multi-missiles is proposed in this work. Firstly, an estimated position of the seeker-less missile is carefully selected, based on which the slant angle of the line between the estimated and real positions of the seeker-less missile is approximately derived inspired by the localization theory of GPS(Global Position System).Then, respectively based on the guidance law considering the impact angle and time constraints, the consensus theory and the finite-time convergence approach, three cooperative guidance laws employing the previously obtained slant angle are derived for intensive attack to address either a stationary or maneuvering target. Simulation results well demonstrate the effectiveness and advantages of the proposed cooperative guidance strategy.