高超声速飞行器纵向内环系统自适应反演预设性能控制

针对高超声速飞行器控制器现有方法大都没有考虑系统的瞬态和稳态性能满足预先设定性能的问题,在模型中存在参数型不确定性的情况下,基于反演设计思想,结合自适应控制技术,提出了一种预设性能控制器的设计方法,利用Lyapunov稳定性定理证明了系统的稳定性,保证纵向内环闭环系统误差全状态满足预设的瞬态和稳态性能。给出的仿真算例验证了提出方法的有效性。     

GNSS global real-time augmentation positioning: Real-time precise satellite clock estimation,prototype system construction and performance analysis

Lots of ambiguities in un-differenced (UD) model lead to lower calculation efficiency, which isn’t appropriate for the high-frequency real-time GNSS clock estimation, like 1 Hz. Mixed differenced model fusing UD pseudo-range and epoch-differenced (ED) phase observations has been introduced into real-time clock estimation. In this contribution, we extend the mixed differenced model for realizing multi-GNSS real-time clock high-frequency updating and a rigorous comparison and analysis on same conditions are performed to achieve the best real-time clock estimation performance taking the efficiency, accuracy, consistency and reliability into consideration. Based on the multi-GNSS real-time data streams provided by multi-GNSS Experiment (MGEX) and Wuhan University, GPS + BeiDou + Galileo global real-time augmentation positioning prototype system is designed and constructed, including real-time precise orbit determination, real-time precise clock estimation, real-time Precise Point Positioning (RT-PPP) and real-time Standard Point Positioning (RT-SPP). The statistical analysis of the 6 h-predicted real-time orbits shows that the root mean square (RMS) in radial direction is about 1–5 cm for GPS, Beidou MEO and Galileo satellites and about 10 cm for Beidou GEO and IGSO satellites. Using the mixed differenced estimation model, the prototype system can realize high-efficient real-time satellite absolute clock estimation with no constant clock-bias and can be used for high-frequency augmentation message updating (such as 1 Hz). The real-time augmentation message signal-in-space ranging error (SISRE), a comprehensive accuracy of orbit and clock and effecting the users’ actual positioning performance, is introduced to evaluate and analyze the performance of GPS + BeiDou + Galileo global real-time augmentation positioning system. The statistical analysis of real-time augmentation message SISRE is about 4–7 cm for GPS, whlile 10 cm for Beidou IGSO/MEO, Galileo and about 30 cm for BeiDou GEO satellites. The real-time positioning results prove that the GPS + BeiDou + Galileo RT-PPP comparing to GPS-only can effectively accelerate convergence time by about 60%, improve the positioning accuracy by about 30% and obtain averaged RMS 4 cm in horizontal and 6 cm in vertical; additionally RT-SPP accuracy in the prototype system can realize positioning accuracy with about averaged RMS 1 m in horizontal and 1.5–2 m in vertical, which are improved by 60% and 70% to SPP based on broadcast ephemeris, respectively.     

Singularity radius gradient-based rapid singularity-escape steering law for SGCMGs

In order to visualize singularity of SGCMGs in gimbal angle space, a novel continuous bounded singularity parameter--Singularity Radius, whose sign can distinctly determine singularity type, is proposed. Then a rapid singularity-escape steering law is proposed basing on gradient of Singularity Radius and residual base vector to drive the SGCMG system to neighboring singular boundary, and quickly escape elliptic singularities. Finally, simulation results on Pyramid-type and skew-type configuration demonstrate the effectiveness and rapidness of the proposed steering law.     

基于最小熵准则的频偏估计算法研究

提出了一种基于SEM(Spectrum Entropy Minimization,频谱熵最小化)的频偏估计算法。研究发现,频偏越小,离散信号频谱的熵越小。根据这一性质建立了相关算法,通过一维搜索的方式得到使相位补偿后信号频谱熵最小的频偏估计。仿真结果表明:SEM算法的估计性能能够达到CR(Cramer-Rao,克拉美罗)下界,而且估计的稳定性和鲁棒性较好,具有一定的应用价值。     

对失控航天器在轨服务的自适应滑模控制器设计

为实现对自由翻滚的失控目标航天器进行在轨服务,基于二阶滑模控制算法设计了相对位置与姿态耦合的自适应控制器。考虑相对转动对相对平动的耦合作用,建立了两航天器对接端口间相对位置与姿态耦合的动力学模型,并在此基础上设计了自适应Super twisting控制器,以减弱已知界限的有界干扰所产生的震颤效应,使闭环系统在有限时间内收敛到平衡点。利用李雅普诺夫方法证明了有界干扰下的闭环系统稳定性,并对收敛时间的上界进行了估计。仿真结果表明,与Super twisting算法相比,所设计的自适应二阶滑模控制器对参数不确定性及线性增长有界干扰具有较强的鲁棒性,且控制精度满足在轨服务的任务需求。     

基于声波传播时间估计的气流速度测量方法

 为实现对亚声速和超声速气流速度的统一测量,提出了一种基于声传感器的新型测量方法。首先,根据声波在亚声速和超声速气流中的传播特性,利用特定的测量装置建立了声波传播时间与气流速度之间的数学模型,从而将气流速度的测量问题转化为声波传播时间的测量问题。然后,在此基础上,利用计时法和最大似然估计(MLE)方法来估计声波传播时间;其中,计时法在实时性上优势明显,而MLE方法则在可靠性上优于前者。最后,分别从阵元位置扰动性、计时误差和克拉美-罗界(CRB)3个方面对所提算法的性能进行了分析与仿真验证。结果表明,该算法能够实现对亚声速和超声速气流速度的精确测量。     

求解双曲守恒律方程的自适应人工黏性熵稳定格式

采用熵守恒格式求解双曲守恒律方程不满足熵稳定条件.为了达到熵稳定,需要在熵守恒格式的基础上增加黏性机制,使总熵耗散.鉴于自适应人工黏性在不同的计算区域上其黏性大小的变化特点,在熵守恒通量的基础上添加经过修正的自适应人工黏性通量构造出一种新的结构简单的熵稳定格式.根据自适应人工黏性的自适应性,并经过简单调节黏性比例系数C之后,该格式可以在不使用限制器的情况下达到整体的高分辨率,表现出:在间断区域有足够的数值耗散保证稳定;在光滑区域,黏性很小,不会影响格式在此的高精度.最后的几个数值算例以熵稳定ERoe格式和高分辨率熵稳定EYee格式的数值结果作为参照,分析说明这种格式的特性.     

Multi-view space object recognition and pose estimation based on kernel regression

The application of high-performance imaging sensors in space-based space surveillance systems makes it possible to recognize space objects and estimate their poses using vision-based methods. In this paper, we proposed a kernel regression-based method for joint multi-view space object recognition and pose estimation. We built a new simulated satellite image dataset named BUAA-SID 1.5 to test our method using different image representations. We evaluated our method for recognition-only tasks, pose estimation-only tasks, and joint recognition and pose estimation tasks. Experimental results show that our method outperforms the state-of-the-arts in space object recognition, and can recognize space objects and estimate their poses effectively and robustly against noise and lighting conditions.     

主子惯导坐标系失调动态估计补偿方法研究

本文研究了船体静态变形角、动态变形角引起的主子惯导坐标系失调角动态补偿方法。研究表明：速度加姿态匹配能够在线估计补偿船体静态变形引起的主子惯导坐标系失调角,角速度匹配传递对准方法能够在线估计补偿船体静态变形、动态变形引起的主子惯导坐标系失调角,两种匹配传递对准方法适用条件均受海况环境影响。     

基于样条拟合和双向滤波的助推段弹道估计

三次B样条拟合在助推段弹道估计中应用广泛,但存在弹道两端点邻域估计误差过大的问题.通过对B样条基函数矩阵的特性进行分析,发现其原因为端点邻域估计时能利用的有效观测数据最少.因此,提出一种基于样条拟合和双向滤波相结合的弹道估计策略：首先将双星观测数据利用无迹变换转换为等效位置观测;然后利用三次B样条拟合弹道;最后基于一种自适应卡尔曼滤波器,采用双向滤波策略改善样条拟合的端点估计精度.仿真结果表明：组合方法使样条拟合的端点估计误差减少40％,同时使估计弹道更平滑.此结果满足实时性要求.