Adaptive Control of Helicopter Ground Resonance with Magnetorheological Damper

The methodology for adaptive control of helicopter ground resonance with magnetorheological （MR） damper is presented. The adaptive inverse control method is used to control the output damping force of MR damper and the range of the damping force is given. Through the adaptive inverse control, the damping force of MR damper is fit to a desired damping force. With the background of applying MR damper to control of helicopter ground resonance, a model of loss force and an adaptive arithmetic for stabilization of the coupled rotor/fuselage system are presented. The simulation shows that the controller presented in this paper can stabilize the rotor/fuselage coupling system quickly and control the helicopter ground resonance effectively.     

改善三元子阵测距精度方法研究

在水声领域,三元子阵测距、目标运动分析(TMA)和匹配场处理(MFP)是被动噪声测距的3种主要技术。文中以三元子阵测距声呐为研究对象,从波束形成、相关系数处理、测向精度改进等方面讨论提高时延估计精度的方法,对工程应用具有一定的参考价值。     

微型涡喷发动机自适应控制实验研究

针对微型涡喷发动机的非线性特性以及难以建立其准确数学模型的特点, 设计了一种自适应控制方案并加以工程实现.通过在模型参考自适应控制算法中采用死区鲁棒控制消除发动机建模误差和外界干扰对控制系统稳定性的影响;同时引入前馈补偿, 既保证发动机转速实时跟踪参考模型输出, 又避免了纯自适应控制容易产生控制信号的饱和以及高自适应增益导致的系统振荡.台架试车验证表明:该方法实时性良好, 在最大转速达125 000 r/min的全工作范围内表现出较好的鲁棒性, 最大超调量小于500 r/min, 稳态误差小于200 r/min, 可以满足微型涡喷发动机状态调节的需要.      

先进复合材料结构的制造成本估算

概述了复合材料制造成本的构成、估算方法的分类以及选择,阐述了复合材料制造成本估算的理论框架及可实际应用的标准工序建模流程和标准模块的概念模型,并指出了成本估算实际应用中的一些问题及解决途径。     

一种预测拦截未制导方法

本文提出一种预测拦截末制导方法。用等价预测碰撞线代替预测碰撞线,只需要探测视线的角速度,使需要探测的参数减少。文中还提出了外扰动常驻条件下,渐近稳定系统的设计方法。应用该方法设计出的末制导系统,可使导弹的攻击区扩大到一个蛋形球空间,使原理脱靶量趋于零。为说明以上结论,给出了仿真结果。     

BTT—90导弹的一种最优导引规律的设计与分析

本文对BTT-90导弹的一种最优导引规律进行了设计和分析,并将其应用于BTT-90导弹的六自由度弹道仿真计算中,得到了令人满意的结果。仿真计算表明,这种导引规律具有较好的工程实用价值。导引规律由最优控制理论推得,它具有形式简单,物理意义明确的特点。理论质点弹道计算的结果,证明了将这种导引规律应用于BTT导弹的合理性和可实现性。     

Impact of the time span selected to calibrate the ballistic parameter on spacecraft re-entry predictions

The trajectory modeling of satellites that are re-entering the Earth’s atmosphere, as a result of natural orbital decay, has always been a challenging task. Residual lifetime estimations and re-entry predictions are affected by substantial uncertainties, associated with atmospheric density models, with the forecasts of the relevant solar and geomagnetic activity indices and with tracking data, which for uncontrolled re-entries are usually sparse and not particularly accurate. Furthermore, modeling the aerodynamic forces that act on low altitude satellites is a formidable task, especially for objects of a complex shape and unknown attitude evolution.     

民航VHF地空通信干扰对策研究

民航VHF地空通信干扰是近年来困扰中国民航的难点问题。通过对中国某机场干扰情况的深入调查和研究，明确了主要干扰源及其产生机理。同时结合中国电磁环境的实际情况和民航自身的特点，提出了从民航自身入手、加强管理、建立监控体系和应急VHF通信接收系统的解决思路。     

Corner-milling of Thin Walled Cavities on Aeronautical Components

This article presents a mathematical model of helical end-milling forces through experimental identification of the cutting coefficients and analyzes the changes of corner-milling forces under different conditions. In allusion to the corner-milling process, the relationship between working parameters and the corner coordinates is investigated by way of combination of tool tracing and cutting geometrodynamics. The milling parameters are optimized by changing the coordinates of tool center and working parameters without altering cutting forces. By applying the optimized parameters to milling practice, a comparison is made to show the improved product quality. Based on these optimized parameters, a finite element method (FEM) program is used to compute deformation values of a workpiece's corner, which evidences few effects that optimized parameters can exert on the corner deformation.     

Design and Experiments of Model-free Compound Controller of Flight Simulator

A model-free compound controller design method is proposed to achieve the wide frequency bandwidth requirement of flight simulators. The method based on quantitative feedback theory, acquires system uncertainty under different working conditions through closed-loop identification with power spectrum estimation. Then in controller designing, it makes a tradeoff between the strict requirements for magnitude-frequency characteristics and those for phase-frequency characteristics of flight simulators, by converting the indices of magnitude-frequency characteristics of flight simulators into quantitative feedback theory-based tracking specification bounds and using feedforward controller to attain the required phase-frequency characteristics. Simulation and experimental results indicate that, when used to design inner frame controller of flight simulator, the proposed method can fulfill the requirements for wide frequency bandwidth indices. Compared with other controller design methods, it has the property of model-free and transparency.