基于扩张状态观测器的动态逆过失速机动飞行控制

针对飞机过失速机动飞行控制问题,提出了一种将动态逆与扩张状态观测器相结合进行扰动估计补偿的新思路。根据时标分离原则将飞机状态分为快变量和慢变量,并分别设计了两个回路的动态逆控制器。在快慢回路分别引入扩张状态观测器对系统的不确定部分进行估计补偿,抵消不确定部分对系统动态特性的影响。最后对控制律进行了过失速机动仿真。结果表明,在存在较大参数摄动情况下,设计的控制律能控制飞机跟踪控制指令,表现出良好的稳定性和鲁棒性。     

基于神经网络模型的襟翼主动控制旋翼减振分析

基于径向基函数(Radial basis function,RBF)神经网络构建了一种带后缘襟翼主动控制(Active controlled flap,ACF)的旋翼振动载荷计算模型。采用正交试验方法确立RBF网络训练样本的输入,在CAMRAD II中计算前飞状态下与训练样本对应的旋翼桨毂六力素,并将主通过频率下的分量作为样本输出,对RBF网络进行离线训练。在此基础上采用多周控制器对被控模型进行振动载荷主动控制。随后以2桨叶4m直径ACF旋翼为例,构建了其桨毂减振分析方法,并对桨毂动载荷各分量的减振效果进行了分析。研究表明,采用正交样本训练的RBF网络能够精确映射襟翼偏角与桨毂振动载荷的非线性关系,施加多周控制后,桨毂垂向振动载荷降低接近50%,其他方向的振动载荷也有不同程度的降低。     

无线传感器网络时间同步协议动态切换机制

针对当前无线传感器网络时间同步协议通用性差的问题,提出了基于主动编程思想的时间同步协议动态切换机制,设计了能够动态适配的时间同步协议切换框架,重点讨论了节点间相互通信、时间戳标记、协议切换、本地时间与全局时间的转换等4个关键问题,并且在TinyOS（Tiny Operating System,微操作系统）平台上对新机制进行了仿真验证,比较了新机制同2种主流时间同步协议之间的性能差异.仿真结果表明：新机制能实现时间同步协议的动态配置,提高协同效率,节省切换开销,具有良好的应用前景.     

Active sidestick technology – a means for improving situational awareness

The use of an active sidestick in FBW-flight control is discussed and the specific features of both passive and active sidesticks are compared. Additional tactile information which could be provided by active sidesticks is seen as an important factor to improve the situational awareness of the pilot. An unique active sidestick concept based on the electro-magnetic actuation principle (electro-magnetic sidestick, MAGSI) is presented. This system is the key element in DLR's research programme EPIAS (Enhanced Pilot Information by using Active Sidestick) which is scheduled to be flight tested on the ATTAS (Advanced Technologies Testing Aircraft System) in-flight simulator at the beginning of next year.     

Assessing the feasibility of involving gaseous products resulting from physicochemical oxidation of human liquid and solid wastes in the cycling of a bio-technical life support system

The study addresses the possible ways of involving gaseous products produced by “wet” incineration of human wastes mixed with H₂O₂ in an alternating electric field in the cycling of the physical model of a bio-technical life support system (BTLSS). The resulting gas mixture contains CO₂ and O₂, which are easily involved in the cycling in the closed ecosystem, and NH₃, which is unacceptable in the atmosphere of the BTLSS. NH₃ fixation has been proposed, which is followed by nitrification and involvement of the resulting products in the mass exchange of the closed system. Experiments have been performed to show that plants can be grown in the atmosphere resulting from the closing of the gas loop that includes a physicochemical installation and a growth chamber with plants representing the phototrophic compartment of the BTLSS. The results of the study suggest the conclusion that the proposed method of organic waste oxidation can be a useful tool in creating a physical model of a closed-loop integrated BTLSS.     

超精密设备的简谐激励主动消振

某些超精密设备可以简化成一个简单的二自由度振动系统,上质量块起到消振作用,当对下质量块施加简谐激振时,设备主体振动被削弱,若上下质量块重量比选择适当,则设备主体振动可完全消除。     

高温合金K38G微晶涂层氧化动力学研究

研究了溅射微晶涂层对K38G在800℃和900℃空气中氧化动力学的影响。发现微晶化后K38G的氧化动力学与经典的抛物线规律存在负偏差。分析认为,微晶化后氧化物形核率大大提高,氧化膜中的扩散由晶格扩散变为晶界短路扩散为主,从而改变了氧化膜的生长动力学。根据Wagner高温氧化的基本理论,对微晶合金高温氧化动力学规律进行了探讨,导出微晶K38G合金氧化动力学遵循四次方规律,即x4=kPt。     

一种用于ACSR的主从机并行处理系统

以微机、ＬＨ－ＳＣ１６Ａ型Ａ／Ｄ板、ＳＣ５０型Ｄ／Ａ板以及ＴＭＳ３２０Ｃ３０Ａ型ＤＳＰ板为基础，建立了时域结构响应主动控制的主从机并行处理系统。这一系统具有多通道快速运算能力，可提高控制系统的控制律，更新速率，改善控制系统的跟踪能力。     

Morphology and Frictional Characteristics Under Electrical Currents of Al203/Cu Composites Prepared by Internal Oxidation

Two AhO3/Cu composites containing 0.24 wt.% A1203 and 0.60 wt.% A1203 separately are prepared by internal oxidation.Effectsof sliding speed and pressure on the fi-ictional characteristics of the composites and copper against brass are investigated and compared.The changes in morphology of the sliding surface and subsurface are examined with scanning electron microscope (SEM) and energy dispersive X-ray spectrum (EDS).The results show that the wear resistance of the AI203/Cu composites is superior to that of copperunder the same conditions.Under a given electrical current,the wear rate of AI203/Cu composites decreases as the AleO3-content increases.However,the wear rates of the Al203/Cu composites and copper increase as the sliding speed and pressure increase under drysliding condition.The main wear mechanisms for AleO3/Cu composites are of abrasion and adhesion;for copper,it is adhesion,although wear by oxidation and electrical erosion can also be observed as the speed and pressure rise.     

气动伺服弹性研究的进展与挑战

飞机、导弹等飞行器的气动伺服弹性(ASE)问题源于空气动力、结构弹性以及控制系统之间的复杂耦合。随着飞行器朝着结构更轻、速度更快、性能更好的目标发展,该问题日益突出,直接影响飞行安全与性能。经过六十余年的研究,国内外在ASE分析、综合与试验方面取得了卓有成效的进展。近十余年来,若干新问题因非常规构型飞行器设计的发展而暴露出来,对ASE研究施加巨大挑战,值得重点分析。鉴于此,讨论了ASE分析中的刚弹耦合、非线性、推力矢量以及系统辨识等问题,对ASE综合中的阵风减缓、颤振主动控制和ASE优化问题加以阐述,强调了ASE试验中需要重视的技术,简要介绍了近十余年国外代表性的ASE试验项目案例,指出了一些ASE研究的新动向,并对国内的ASE研究给出了建议。