Active sidestick technology – a means for improving situational awareness

The use of an active sidestick in FBW-flight control is discussed and the specific features of both passive and active sidesticks are compared. Additional tactile information which could be provided by active sidesticks is seen as an important factor to improve the situational awareness of the pilot. An unique active sidestick concept based on the electro-magnetic actuation principle (electro-magnetic sidestick, MAGSI) is presented. This system is the key element in DLR's research programme EPIAS (Enhanced Pilot Information by using Active Sidestick) which is scheduled to be flight tested on the ATTAS (Advanced Technologies Testing Aircraft System) in-flight simulator at the beginning of next year.     

基于LQG/LTR的飞翼飞机阵风减缓系统研究

根据我国《运输类飞机适航标准》的要求,采用有理谱逼近的方法建立了Von Karman大气紊流的数值仿真模型;详细推导了多变量系统鲁棒性的衡量方法,给出了开环系统奇异值曲线形状与闭环系统鲁棒性的关系;针对飞翼飞机多操纵面的特点,将控制分配技术与LQG/LTR控制器结合在一起,同时兼顾了对飞机过载和翼根弯矩的减缓。仿真结果表明,所设计的控制系统在对飞机过载减缓的同时,也对机翼的翼根弯矩进行了有效的减缓。     

基于约束预测控制的飞行失控包线保护研究

风切变等大气扰动现象严重威胁飞机起降飞行安全。在受到随机风切变干扰下,离线设计的最优控制器无法保证飞行状态始终处在正常包线内。在大型民机线性变参数模型的基础上,从预防飞行失控的角度研究风切变下飞机进场着陆的预测控制方法。将飞行失控包线量化为状态约束,在此基础上设计在线模型预测控制器。仿真结果表明,利用预测控制的滚动优化策略,可使飞机在进场下滑阶段遭遇风切变时进行良好的下滑道捕获和跟踪,且将飞机状态始终约束在安全包线内。     

基于环控物理仿真平台的余度模型设计

在环控物理仿真平台上,基于MATLAB和Vxworks环境,建立了飞机环控系统余度模型。详细论述了环控系统故障模型、机电管理计算机模型。此外,对模型的有效性、可靠性进行了验证。通过试验验证,表明模型结构正确、能够满足环控系统余度功能要求。     

平流层飞艇动力推进系统的分析与设计

针对平流层飞艇螺旋桨与直流无刷(DC)电动机匹配问题,建立了直流无刷电动机模型和螺旋桨模型;结合匹配设计和直流无刷电动机转速控制,在Simulink中设计了螺旋桨与直流无刷电动机控制系统仿真模型,研究飞艇在0~10m/s巡航速度下动力推进系统控制响应问题;采用图形用户界面(GUI)编写螺旋桨与直流无刷电动机匹配界面,开发了一种螺旋桨与直流无刷电动机匹配软件;得到了飞艇在0~10m/s巡航速度下,螺旋桨工作转速为535~1071r/min,动力推进系统工作效率为0.558~0.593时推进系统匹配设计的工作曲线,为高空螺旋桨与电动机的匹配设计提供了参考依据.      

Flow separation control on swept wing with nanosecond pulse driven DBD plasma actuators

A 15° swept wing with dielectric barrier discharge plasma actuator is designed.Experimental study of flow separation control with nanosecond pulsed plasma actuation is performed at flow velocity up to 40 m/s. The effects of the actuation frequency and voltage on the aerodynamic performance of the swept wing are evaluated by the balanced force and pressure measurements in the wind tunnel. At last, the performances on separation flow control of the three types of actuators with plane and saw-toothed exposed electrodes are compared. The optimal actuation frequency for the flow separation control on the swept wing is detected, namely the reduced frequency is 0.775, which is different from 2-D airfoil separation control. There exists a threshold voltage for the low swept wing flow control. Before the threshold voltage, as the actuation voltage increases, the control effects become better. The maximum lift is increased by 23.1% with the drag decreased by 22.4% at 14°, compared with the base line. However, the best effects are obtained on actuator with plane exposed electrode in the low-speed experiment and the abilities of saw-toothed actuators are expected to be verified under high-speed conditions.     

基于DSP的飞机全电刹车数字防滑刹车控制器设计

分析了飞机全电刹车系统的基本结构及其工作原理,在此基础上,提出了以先进的数字信号处理器(DSP)为核心的数字防滑刹车控制器,采用速度差加压力偏调(PD+PBM)控制算法,使用ARJNC429总线通信方式进行通信,完成了数字防滑刹车控制器的软硬件设计及系统调试等.试验结果表明,该数字防滑刹车控制器工作稳定可靠,与系统联试...     

无人机遥控驾驶关键技术研究与飞行品质分析

无人机遥控驾驶方式相对程控方式来说,在时间延迟、情景遥现、数据链性能优化以及飞行控制等方面的要求较高,而这些因素也成为了困扰无人机遥控驾驶发展和应用的关键.借鉴无人机技术验证平台地面闭环试验的结果,以时间延迟、数据链路性能为重点针对无人机遥控驾驶所面临的各种关键技术难点进行了深入的分析、研究,提出了合理的关键技术解决方...     

激光推进加速飞行器的飞行控制与数值仿真

激光能够照射到的区域受到限制,飞行器只能在这个范围飞行并尽可能获得较大的速度.考虑两种不同的加速方式:竖直平面内直接加速和螺旋加速,使用程序调参飞行控制技术确定操纵面偏转角度,控制飞行器轨迹,并且给出了相应的仿真结果.结果表明,操纵控制下的飞行器能够按照预定轨迹飞行;使用螺旋加速方式,可以延长激光加速的时间,但是这两种加速方式最后得到的速度差不多, 而螺旋加速的操纵复杂,因此竖直平面内直接加速有一定的优势.     

CONTROL OF TWO DIMENSIONAL JETS USING MINIATURE ZERO MASS FLUX JETS

Zero mass flux jets, synthesized by acoustic actuators, have been used for the purpose of jet mixing enhancement and jet vectoring. Zero mass flux jets composed of entirely entrained fluid allow momentum transfer into the embedding flow. In the present experiments, miniature-scale high aspect ratio actuator jets are placed along the long sides and near the exit plane of a primary two-dimensional jet. In different modes, the primary jet can be vectored either towards or away from the actuator jets and the jet mixing is enhanced. The disturbance of the excitation frequency is developed while the unstable frequency of the primary jet is completely suppressed.