基于LADRC的无人机高精度定高控制

针对复杂气流扰动对无人机（UAV）航迹高度控制的影响,对存在复杂气流扰动下的定高控制策略、控制结构和控制器参数优化展开研究,实现高精度高度控制。基于线性自抗扰控制（LADRC）确定总体控制架构,设计扩张状态观测器（ESO）观测估计纵向高度通道和速度通道中存在的总扰动,在控制中引入扰动补偿,减小扰动对系统输出造成的影响。对UAV在飞行过程中存在的大气紊流扰动或离散突风等风干扰分析其功率谱密度,构造考虑风扰动对高度影响、时域响应特性和稳定裕度的综合目标函数,通过粒子群优化算法得到具有高精度、高抗干扰性能的控制器参数,优化中考虑风干扰的功率谱密度分布,减小了控制器参数设计的保守性。通过与常规比例-积分-微分（PID）控制器控制效果进行对比,说明基于线性自抗扰控制器的纵向高度控制的优异性能。      

基于SIP的Ka频段高集成度有源相控阵天线设计

卫星有效载荷系统逐渐开始采用相控阵天线作为收发装置,由于卫星的体积和重量受限,星载相控阵天线必须朝小型化、轻量化方向发展。传统砖块式架构的ka频段64元相控阵天线的剖面高度约60~80mm,重量约2kg。近年来,研究人员从设计、工艺和加工等不同方向探索和研究了瓦片式的相控阵天线,期望能从设计和加工方法上减小相控阵天线体积和重量,从设计方法入手,研究了一种基于系统集成封装技术的有源相控阵天线,该天线的辐射单元材料采用微带介质板,相较于其它形式的辐射单元具有更低的剖面高度,微波射频电路被封装到低温共烧陶瓷基板内部,射频走线与辐射单元平行布局,通过高集成化设计将微波电路和天线辐射单元进行一体化组装,与传统砖块式架构的相控阵天线相比,在具有相同辐射口径的前提下,设计的天线剖面高度缩减到30mm,重量减小到1kg,工作在Ka频段,波束扫描宽度达到±60°。满足了减小相控阵天线体积和重量的要求。     

尺度效应下大功率伺服电机再生冷却通道超临界态甲烷传热特性研究

针对飞行器电动执行机构的大功率伺服电机强化散热问题,建立了不同尺度的电机缠绕式螺旋管再生冷却通道数值模型,对超临界态甲烷在尺度效应影响下的传热特性和机理进行研究,探讨了不同尺度冷却通道中超临界态甲烷所受重力浮升力和离心浮升力对传热性能的影响.结果表明,离心浮升力及重力浮升力均受到超临界态甲烷热物性剧烈变化的影响;在相同...     

基于热管-风冷系统的新能源汽车电机热分析

针对新能源汽车电机紧凑、轻量化、高功率密度和高可靠性的要求,提出基于热管-风冷系统的新型冷却系统。设计了基于热管-风冷系统的电机结构,建立电机有限元热分析模型并验证其可行性;通过有限元模拟,研究该新型电机在额定功率和峰值功率下的温度场。结果表明:热管-风冷系统能有效地控制电机的温升。与水冷系统相比,无需水泵、节温器、水箱、管路以及其他装置,结构简单、紧凑,有利于实现新能源汽车的轻量化和高功率密度。     

基于模型补偿的风力机变桨距线性自抗扰控制器设计

设计了一种变桨距线性自抗扰控制器,估计和补偿了系统未建模部分和外界干扰,实现额定风速以上时系统输出功率稳定于额定值;并采用模型补偿方法对自抗扰控制器进行优化,减少了参数整定的数目,提高了系统控制精度。对额定功率为300 kW的风电机组分别在阶跃风、阵风以及湍流风作用下进行系统仿真。结果表明,该方法可以快速调节风速变化引起的输出波动,使得系统输出稳定且超调量小,具有很好的稳定性和鲁棒性。     

汽雾两相流强化冷却燃气轮机叶片内冷通道

实验研究了方形通道这一重型燃气轮机中常用叶片强制对流冷却通道结构.分析了雷诺数、壁面热流密度以及水雾质量流量比等关键参数对汽雾冷却通道的传热特性的影响,并建立了考虑离散相水雾的流动工况和通道壁面加热条件的实验关联式.结果表明:相对于纯蒸汽,汽雾两相流的传热系数显著提高,且传热性能提高的幅度随热流密度的增大而减小,随雷诺数和水雾质量流量比的增大而增大;通道上壁面平均传热系数低于下壁面,在高热流密度和低水雾质量流量比下,两者相差约13%,而在低热流密度与高水雾质量流量比的情况下,该比值增加到约25%.      

Probing the origin of the iron Kα line around stellar and supermassive black holes using X-ray polarimetry

Asymmetric, broad iron lines are a common feature in the X-ray spectra of both X-ray binaries (XRBs) and type-1 Active Galactic Nuclei (AGN). It was suggested that the distortion of the Fe Kα emission results from Doppler and relativistic effects affecting the radiative transfer close to the strong gravitational well of the central compact object: a stellar mass black hole (BH) or neutron star (NS) in the case of XRBs, or a super massive black hole (SMBH) in the case of AGN. However, alternative approaches based on reprocessing and transmission of radiation through surrounding media also attempt to explain the line broadening. So far, spectroscopic and timing analyzes have not yet convinced the whole community to discriminate between the two scenarios. Here we study to which extent X-ray polarimetric measurements of black hole X-ray binaries (BHXRBs) and type-1 AGN could help to identify the possible origin of the line distortion. To do so, we report on recent simulations obtained for the two BH flavors and show that the proposed scenarios are found to behave differently in polarization degree and polarization angle. A relativistic origin for the distortion is found to be more probable in the context of BHXRBs, supporting the idea that the same mechanism should lead the way also for AGN. We show that the discriminating polarization signal could have been detectable by several X-ray polarimetry missions proposed in the past.     

磁悬浮飞轮微振动特性及其主动振动控制方法研究

为了进一步减小磁悬浮飞轮的振动力和力矩,建立并分析了一种特殊结构的磁悬浮飞轮的微振动模型,并利用微振动测量平台、数据采集分析硬件和软件,通过试验测量了磁悬浮飞轮6个自由度的振动力和力矩.分析其时域特性和频域特性,其振动特性图(瀑布图)显示了径向两个平动方向X和Y的振动力主要是同频分量、倍频分量以及模态量,其中同频分量较为明显.利用开闭环自适应陷波,分别对X、Y两个方向的振动力进行主动振动控制,取得了较好的控制效果,使得两个方向的振动力的同频量显著下降.     

Self-perspiration garment for extravehicular activity improves skin cooling effects without raising humidity

Introduction

The current U.S. extravehicular activity (EVA) suit in space includes liquid cooling and ventilation garment (LCVG) to control thermal condition. Tubes knitted in LCVG for flowing water interrupt evaporation of perspiration, and astronauts feel discomfort. In the present study, we hypothesized that a self-perspiration garment would effectively lower the skin temperature without raising humidity in the garment. Thus, we developed and examined the effects of the garment.

Methods

Eight healthy subjects were studied with a cyclic ergometer of 30, 60 90 and 120 W loading for 3 min each. Skin temperature and humidity on the back were measured continuously. Subjects wore and tested three types of garments i.e., a spandex wear without any cooling device (Normal), a simulated LCVG (s-LCVG) or the spandex wear knitted a vinyl tube for flowing water, and the spandex wear with a tube, which flows water and self-perspiration with oozing water for evaporative cooling (SPEC).

Results

All measurements were reached to steady state 2–3 min after the setting. The s-LCVG decreased skin temperature 0.39±0.14 °C during 12 min of cooling. With SPEC, skin temperature did not decrease significantly until 6–9 min after starting the cooling. However, the temperature decreased rapidly and significantly after that, and finally decreased 1.59±0.32 °C. Humidity in the SPEC was significantly lower than that in s-LCVG.

Discussion

SPEC was effective for lowering skin temperature without raising humidity in the garment. The concept is expected to use as a better cooling system during EVA.     

激光有源干扰的防御措施

激光有源干扰是目前光电干扰领域发展的热点,如何对其实现成功防御是一个重要课题。主要讨论了激光有源干扰的各种防御措施,重点是激光测距机和半主动激光制导武器的抗干扰措施、激光防护器材的防护原理以及新体制导弹的强激光防护技术。