基于几何设计法的航空发动机内外机匣减振控制新方法

航空发动机在运行过程中，由于其结构的复杂性和外部气流的不稳定性，不可避免地会产生大量的振动问题。针对航空发动机整机振动问题，首先根据航空发动机的实际结构并结合经验总结，建立了一种通用的转子-支承-机匣振动传递动力学模型，并从航空发动机内外机匣减振控制问题出发，利用一种新型的控制算法（几何设计法），在有限频域内来设计减振控制器，在传感器和执行机构受限的情况下，尝试对多个输出量（即航空发动机的内机匣和外机匣）进行减振控制，并与经典控制理论法比例、微分、积分（Proportional integral derivative,PID）设计的减振控制器进行减振效果对比，最后通过Matlab/Simulink搭建仿真模型并进行仿真验证。结果表明，几何设计法在有限频域内可以直观地获得最优控制器的存在性、唯一性、最优性，对于主控对象的减振控制最优可高达25 dB，相较于传统控制方法形成明显优势。     

Three-dimensional time-varying sliding mode guidance law against maneuvering targets with terminal angle constraint

This paper deals with the problem of intercepting maneuvering targets with terminal angle constraints for missiles subjected to three-dimensional non-decoupling engagement geometry.To achieve the finite-time interception and satisfactory overload characteristics, a time varying sliding mode control methodology is developed based on a time base generator function. The main feature of the proposed guidance law guarantees the Line-of-Sight(LOS) angles to converge to small neighborhoods of the desir...     

飞机主动侧杆系统用双三相永磁同步电机的设计与转矩性能分析

针对主动侧杆系统的运行需求，本文设计了一款双三相永磁同步电机，介绍了该种电机的基本结构和优点，分析了极槽配合和裂比两大关键参数的设计方法，研究了在空间限制下电机尺寸设计策略，分析了关键参数对电机性能的影响，对比了参数变化时电机转矩、转矩脉动的变化趋势，研究了电机的优化方向和参数，确定了电机的结构尺寸、绕组分布等参数。通过仿真验证了理论设计的正确性。所设计的电机输出转矩符合设计需求，转距脉动较小，不会为操纵杆手柄带来震荡的问题。电机单余度工作情况下，仍然可以达到额定转距的输出需求，保证了系统的安全性。     

主动全向声纳浮标性能预测

主动声纳浮标适合探测安静型潜艇,预测主动声纳浮标的性能已成为航空反潜战的重要内容。文章首先简要分析了水声传播模型、海底和海面损失模型以及混响模型等声纳模型的优劣并进行合理选择；在此基础上,提出了一种主动全向声纳浮标性能预测系统的总体方案,并设计了相应软件；最后,针对不同的海洋环境进行仿真实验。该系统能预测主动声纳浮标在各传播方向、水平距离和深度的传播损失及检测概率,可以用于分析浮标性能的时空变化特性,为优化使用声纳浮标提供参考。     

An improved altimeter-derived gravity anomaly from shipborne gravity based on the mean sea surface height constraint factors method

Coastal marine gravity modeling faces challenges due to the degradation of the quality and poor coverage of altimeter data in coastal regions. The effective fusion of shipborne gravity data and altimeter-derived marine gravity data can make shipborne gravity data more useful for the accurate estimation of altimeter-derived coastal marine gravity. A mean sea surface height constraint factor (MSSHCF) method based on the ordinary kriging method and the remove-restore technique is proposed to fuse altimeter-derived gravity model with shipborne gravity data. In this method, all data are standardized during the interpolation process to reduce the error and mean sea surface as a vertical variable is added to the semi-variance function in ordinary kriging to obtain the residual shipborne gravity as corrected data source. The coastal marine gravity models V2.1 and V3.1 which fused altimeter-derived gravity data with shipborne gravity data and V1.1 without shipborne gravity data at a spatial resolution of 1′×1′ can be obtained. Validation experiments show that the accuracy of the gravity model V3.1 obtained by the MSSHCF method more closely agrees with the validated gravity model DTU17 and SS V31 than the model V2.1 obtained by the ordinary kriging interpolation method and the V1.1 model. Our results were validated against shipborne gravity data; the accuracy of model V3.1 was 4.95 % higher than the model V1.1 in South China Sea area A and 2.48 % higher in South China Sea area B. Meanwhile, the accuracy of model V3.1 was 2.07 % higher than model V2.1 in South China Sea area A and 2.42 % higher in South China Sea area B. The effects of distance from the coast and sea depth on the marine gravity model were also evaluated. The results show that the gravity model V3.1 has higher accuracy with the change in ocean distance and depth than the V2.1 and V1.1 gravity models. Thus, our study shows that the MSSHCF method effectively refines coastal altimeter-derived gravity using shipborne gravity data.     

Workspace,stiffness analysis and design optimization of coupled active-passive multilink cable-driven space robots for on-orbit services

The use of space robots (SRs) for on-orbit services (OOSs) has been a hot research topic in recent years. However, the space unstructured environment (i.e.: confined spaces, multiple obstacles, and strong radiation interference) has greatly restricted the application of SRs. The coupled active-passive multilink cable-driven space robot (CAP-MCDSR) has the characteristics of slim body, flexible movement, and electromechanical separation, which is very suitable for extreme space environments. However, the dynamic and stiffness modeling of CAP-MCDSRs is challenging, due to the complex coupling among the active cables, passive cables, joints, and the end-effector. To deal with these problems, this paper proposes a workspace, stiffness analysis and design optimization method for such type of MCDSRs. Firstly, the multi-coupling kinematics relationships among the joint, cables and the end-effector are established. Based on hybrid series-parallel characteristics, the improved coupled active–passive (CAP) dynamic equation is derived. Then, the maximum workspace, the maximum stiffness, and the minimum cable tension are resolved, among them, the overall stiffness is the superposition of the stiffness produced by the active and the passive cable. Furthermore, the workspace, the stiffness, and the cable tension are analyzed by using the nonlinear optimization method (NOPM). Finally, an 8-DOF CAP-MCDSR experiment system is built to verify the proposed modeling and trajectory tracking methods. The proposed modeling and analysis results are very useful for practical space applications, such as designing a new CAP-MCDSR, or utilizing an existing CAP-MCDSR system.     

陶瓷基复合材料旋转爆震燃烧室壁面冷却研究

为了降低旋转爆震发动机燃烧室壁面温度，设计了陶瓷基复合材料燃烧室主动冷却结构。对燃烧室主动冷却结构的传热特性进行数值模拟，获得主动冷却燃烧室壁面温度响应和温度分布规律。对燃烧室主动冷却结构进行了模型简化，将模拟旋转爆震波获得的不同壁面温度下的热流密度参数加载在冷却模型上，提高了壁面温度模拟的计算效率。结果表明：燃烧室内壁面热流密度随着壁面温度的升高而降低，扩散区的平均热流密度最大；陶瓷基复合材料燃烧室主动冷却结构可以有效降低燃烧室壁面温度，在相同冷却流量下，矩形冷却截面的冷却效果优于圆形冷却截面，可以将燃烧室壁面的温度降到1 200 K以下；燃烧室壁面最高温度在燃烧室中段区域。     

Formation control for networked multiagent systems with a minimum energy constraint

Minimum-energy formation achievement problems for networked multiagent systems are investigated, where information networks with leaderless and leader-follower structures are respectively addressed and information networks are randomly switching. The critical feature of this work is that the energy constraint is minimum in the sense of the linear matrix inequality, but limited-budget control and guaranteed-cost control cannot realize a minimum-energy formation. Firstly, the leaderless minimum-energy formation control problem is converted into an asymptotic stability one via a nonsingular transformation and state space decomposition, and based on linear matrix inequality techniques, sufficient conditions for analysis and design of leaderless minimum-energy formation achievement are proposed, respectively, which can be solved by the generalized eigenvalue method. Then, main results of minimum-energy formation achievement of leaderless networked multiagent systems are extended leader-follower networked multiagent systems, where the asymmetric property of the leader-follower information network is well dealt with by two nonsingular transformations. Finally, two simulation examples are shown to verify the main results for minimum-energy formation achievements of leaderless and leader-follower networked multiagent systems, respectively.