电火工品在线检测装置的温度特性

介绍了工程使用中电火工品的检测电路原理图和工作原理,并在高低温状态下对电路进行了性能研究.为满足电路在较大温度范围内的性能指标,根据高低温状态下的实测值调整了电路的门限值,满足了较大温度范围内电火工品的检测.     

基于无限元方法的直升机外部噪声仿真分析

为了准确地模拟直升机飞行中的外部噪声,建立了耦合计算流体力学/计算气动声学(Computational fluid dynamics/Computational aeroacoustics,CFD/CAA)的直升机机外噪声预测方法.气动计算采用CFD方法模拟旋翼、尾桨气动力以及气动干扰;噪声计算采用声学无限元方法,考虑...     

复合材料抗冲击性能和结构压缩设计许用值

 从复合材料结构压缩设计许用值的概念和复合材料的冲击后压缩强度性能出发,讨论按NASA标准得到的CAI值与它们的关系,指出传统的CAI值不能充分反映复合材料体系的抗冲击性能,且与结构压缩设计许用值无任何联系。在对复合材料结构完整性要求和作者的试验研究,和对国外文献总结的基础上,提出复合材料抗冲击性能应包括损伤阻抗和损伤容限两方面。大量的试验数据证实复合材料层压板抗冲击性能存在拐点现象,在对拐点附近复合材料层压板的破坏机理研究基础上,建议用拐点附近的性能建立复合材料层压板抗冲击性能的评定体系,即可以用表面层在冲击下保持其完整性的最大能力(最大接触力)来表征复合材料体系的损伤阻抗(韧性);用出现拐点后基本不变的压缩强度(破坏应变)门槛值来表征复合材料体系的损伤容限。     

基于自适应模拟退火遗传算法的月球软着陆轨道优化

 将自适应遗传算法与模拟退火算法相结合,形成一种自适应模拟退火遗传算法。该算法不但具备了自适应遗传算法的强大全局搜索能力,也拥有模拟退火算法的强大局部搜索能力。针对月球软着陆轨道优化的特点,利用一种新的参数化方法将轨道优化问题转换为非线性规划问题,并应用提出的自适应模拟退火遗传算法进行优化。数值结果表明：该算法的收敛速度快,优化精度高,且避免了初值敏感、病态梯度和局部收敛等问题,能够搜索到全局最优轨道。     

基于传递函数方法的局部覆盖环状CLD圆柱壳动力学分析

 采用传递函数方法对局部覆盖环状约束层阻尼（CLD）圆柱壳进行了动力学分析。基于Donnell薄壳简化,由Hamilton原理导出了局部覆盖CLD圆柱壳的运动方程和边界条件,通过Laplace变换并引入状态向量后,建立了系统的状态空间方程,利用传递函数方法求解方程得到了系统的固有频率、〖JP2〗损耗因子和频响曲线。算例分析结果验证了该方法的有效性和精确性,且更适于处理黏弹性材料具有频变特性的问题。讨论了CLD覆盖率和黏弹层厚度对系统固有频率和损耗因子的影响,为局部覆盖CLD圆柱壳的优化设计奠定了基础。     

Periodic Error Compensation for Quartz MEMS Gyroscope Drift of INS

In order to improve the navigation accuracy of an inertial navigation system （INS）, composed of quartz gyroscopes, the existing real-time compensation methods for periodic errors in quartz gyroscope drift and the periodic error term relationship between sampled original data and smoothed data are reviewed. On the base of the results, a new compensation method called using former period characteristics to compensate latter smoothness data （UFCL for short） method is proposed considering the INS working characteristics. This new method uses the original data without smoothing to work out an error conversion formula at the INS initial alignment time and then compensate the smoothed data errors by way of the formula at the navigation time. Both theoretical analysis and experimental results demonstrate that this method is able to cut down on computational time and raise the accuracy which makes it a better real-time compensation approach for periodic error terms of quartz micro electronic mechanical system （MEMS） gyroscope＇s zero drift.     

冲击载荷作用下新型阻尼铝合金的阻尼及力学性能

 采用冲击实验装置研究了新型阻尼铝合金材料在冲击载荷作用下的动态力学性能及表征方法。研究结果表明：采用冲击实验的冲击功及能量参数能够科学合理地表征铝合金材料的力学及阻尼性能。新型阻尼铝合金材料的抗冲击载荷能力和阻尼性能均高于普通铸造铝合金材料86%及37%左右,且内部组织致密、均匀细小,具有优良的综合性能。     

New Cutting Force Modeling Approach for Flat End Mill

A new mechanistic cutting force model for flat end milling using the instantaneous cutting force coefficients is proposed. An in-depth analysis shows that the total cutting forces can be separated into two terms: a nominal component independent of the runout and a perturbation component induced by the runout. The instantaneous value of the nominal component is used to calibrate the cutting force coefficients. With the help of the perturbation component and the cutting force coefficients obtained above, the cutter runout is identified. Based on simulation and experimental results, the validity of the identification approach is demonstrated. The advantage of the proposed method lies in that the calibration performed with data of one cutting test under a specific regime can be applied for a great range of cutting conditions.     

Revisiting the space-time gradient method: A time-clocking perspective,high order difference time discretization and comparison with the harmonic balance method

This paper revisits the Space-Time Gradient(STG) method which was developed for efficient analysis of unsteady flows due to rotor–stator interaction and presents the method from an alternative time-clocking perspective. The STG method requires reordering of blade passages according to their relative clocking positions with respect to blades of an adjacent blade row. As the space-clocking is linked to an equivalent time-clocking, the passage reordering can be performed according to the alternativ...     

A spanwise loss model for axial compressor stator based on machine learning

In the early stage of aircraft engine design, the through-flow method is an important tool for designers. The accuracy of the through-flow method depends heavily on the accuracy of the loss model. However, most existing models cannot(or cannot well) provide the spanwise loss distribution. To construct an effective spanwise loss model, both turbomachinery knowledge and machine learning skills were used in this paper. A large number of numerical simulations were carried out to build a database con...