航空发动机总温热电偶校检问题

由于航空总温热偶气动构件的复杂性，校验问题一直悬而未决。制成后的电偶热电特性迁移，及配套特性变化强调了配套校验是必要的。本文在着重分析了以上问题后，介绍了自行研制的已获国家专利的ＳＴＴ－１Ａ系列总温热电偶校验器。     

5A06铝合金超快变换极性VPTIG焊接工艺

研发了一种适用于铝合金材料的新型超快速变换变极性焊接工艺,以5A06为焊接对象,通过X射线探伤、拉伸试验、金相分析以及扫描电镜等手段对超快变换VPTIG焊接工艺进行了试验研究.试验结果表明,超快变换变极性,11G焊接工艺能够显著改善和提高5A06铝合金的焊接质量.     

A/D和D/A转换特性参数测试方法

简要介绍了A/D、D/A转换器的主要测试参数,着重讨论转换特性参数的测试方法及其在混合集成电路测试系统上的实现;同时还介绍了A/D、D/A转换器的一些其他测试方法。     

M/G/1排队系统性能梯度估计的非标准分析法

如何估计系统性能梯度是离散事件动态系统研究中的一个重要问题.系统性能对于概率参数的梯度无法用传统的摄动分析法来估计,我们从非标准分析的角度提出了一种基于Dirac δ函数的摄动分析算法,分析了相应估计量的强相合性和渐近无偏性.新算法在实现过程中需要用样条函数来近似δ函数,但可以同时估计M/G/1排队系统中顾客期望系统时间和忙期期望长度对概率参数的梯度.数值实验结果表明估计量的相对误差和无偏性检验值都比较小,新算法能够很好地估计M/G/1排队系统的性能梯度.     

Comparative study of productivity of the Rosetta target Comet 67P/Churyumov-Gerasimenko

In an attempt to evaluate correlations between several properties of comets we report the results of a cometary research involving a criterious analysis of gas and dust mass production rates in Comets 67P/Churyumov-Gerasimenko (main target of Rosetta Mission), 1P/Halley, Hyakutake (C/1996 B2), and 46P/Wirtanen and make a comparison between them.     

热处理真空淬火工艺的应用

超高强度钢在普通空气炉和盐炉中热处理后，零件表面氧化脱碳相对比较厚，再返回机加车间精加工，其高强度给机加带来不便。通过改进热处理工艺，采用保护气氛炉或真空炉淬火，在满足机械性能要求的前提下，实现少、无氧化热处理。     

Spin parameters of Low Earth Orbiting satellites Larets and Stella determined from Satellite Laser Ranging data

Satellite Laser Ranging (SLR) measurements contain information about the spin parameters of the fully passive, geodetic satellites. In this paper we spectrally analyze the SLR data of 5 geodetic satellites placed on the Low Earth Orbits: GFZ-1, WESTPAC, Larets, Starlette, Stella, and successfully retrieve the frequency signal from Larets and Stella only. The obtained signals indicate an exponential increase of the spin period of Larets: T = 0.860499·exp(0.0197066·D) [s], and Stella: T = 13.5582·exp(0.00431232·D) [s], where D is in days since launch. The initial spin periods calculated from the first month of the SLR observations are: Larets: T_initial = 0.8239 s, Stella: T_initial = 13.2048 s. Analysis of the apparent effects indicates the counter-clockwise spin direction of the satellites. The twice more heavy Stella lost its rotational energy more than four times slower than Larets. Fitting the spin model to the observed spin trends allows determination of the spin axis orientation evolution for Larets and Stella before their rotational period becomes equal to the orbital period.     

TS-InSAR analysis for monitoring ground deformation in Lanzhou New District,the loess Plateau of China,from 2017 to 2019

Large-scale land creation projects involving the cutting of mountains to infill gullies for construction have been carried out in Lanzhou New District (LZND). However, there is an urgent need for comprehensive and detailed research on the spatiotemporal evolution of ground deformation in LZND. Based on Sentinel-1A SAR data, combined with the urban geological background, the ground deformation in LZND from 2017 to 2019 was analysed. Two independent, multi-temporal techniques, persistent scatterers interferometry (PS-InSAR) and the small baseline subset (SBAS-InSAR), were used to calculate the deformation time series, and the results were cross-verified. The time series-monitoring results of the SBAS and PS calculations exhibited strong consistency in LZND and verified the high reliability of the experimental results. The results showed the whole surface of the LZND from March 2017 to October 2019 maintained stability, and the deformation rate was primarily in the range of ?10 to 10 mm/year. However, ground deformation in the Xicha area was evident. The maximum annual deformation rates monitored by SBAS-InSAR and PS-InSAR were ?52.48 mm/year and ?56.35 mm/year, respectively. The most typical deformation areas include the built-up area and the land creation area. The surface subsidence area was concentrated in the filling area. The ground deformation range of LZND kept expanding and accelerating from 2017 to 2019. Land creation, urban construction, geology and precipitation were the primary factors contributing to local severe ground deformation. The results of this study provide reference for the regional urban planning in LZND.     

基于一类含极少运动副四支链两转一移三自由度并联机构的五轴混联机器人

首先提出了一类含较少运动副四支链两转一移三自由度（2R1T）并联机构（PMs）2RPU-UPR-RPR和2UPR-RPU-RPR，然后提出了极限约束力螺旋系的概念，分析四支链2R1T并联机构末端的极限约束力螺旋系，对所提出的四支链2R1T并联机构是否同类机构中含运动副最少进行了论证。基于提出的四支链并联机构构造了一种五自由度混联机器人机构，建立了2-RPU-UPR-RPR并联机构的位置反解模型，并将其等效成一个三自由度串联机构RPR，进而对整个混联机器人机构进行了位置正反解分析，建立得到了混联机器人机构位置反解的显式解析表达式，并用加工球面轨迹的算例对所建运动学模型的正确性进行验证。提出的五自由度混联机器人含有极少的运动副，且所有转动自由度均具有连续转轴，能够得到解析的位置模型表达式，很容易实现轨迹规划与运动控制，具有良好的应用前景。     

First astrometric observations of space debris with the MéO telescope

The MéO (for Métrologie Optique) telescope is the Satellite and Lunar Laser Ranging (SLR) dedicated telescope of Observatoire de la Côte d’Azur (France) located at plateau de Calern. The telescope uses an altazimuth mount. The motorization of the mount has a capability of 6 deg/s allowing the follow up of Low Earth Orbits (LEO) satellites, as well as Medium Earth Orbits (MEO) and geostationary (GEO) satellites, and the Moon. The telescope has a primary mirror of 1.54 m. It uses a Nasmyth focus equipped with an EMCCD camera. The telescope field of view, defined by the equivalent focal length and the size of the camera, is currently 3.4 arcmin × 3.4 arcmin.