发动机零部件稳态应力计算的状态函数法

借鉴发动机气动参数相似准则的基本思想, 提出了根据典型工作点的应力结果直接推算出其它状态点的状态函数法.利用该方法可以快速计算发动机任意状态点的稳态应力、位移、温度, 可以便捷地为构件寿命预估提供应力谱, 使发动机零部件寿命计算过程大大简化.该方法在发动机零部件寿命预估和管理等方面有较高的实用价值.      

Effects of yaw-roll coupling ratio on lateral-directional aerodynamic characteristics

Experimental investigation of large amplitude yaw-roll coupled oscillations was conducted in a low-speed wind tunnel using an aircraft configuration model. A special test rig was designed and constructed to provide different coupled motions from low to high angles of attack.A parameter ‘‘coupling ratio" was introduced to indicate the extent of yaw-roll coupling. At each pitch angle, seven coupling ratios were designed to study the yaw-roll coupling effects on the lateraldirectional aerodynamic characteristics systematically. At high angles of attack, the damping characteristics of yawing and rolling moments drastically varied with coupling ratios. In the coupled motions with the rotation taking place about the wind axis, the lateral-directional aerodynamic moments exhibited unsteady characteristics and were different from the ‘‘quasi-steady" results of the rotary balance tests. The calculated results of the traditional aerodynamic derivative method were also compared with the experimental data. At low and very high angles of attack, the aerodynamic derivative method was applicative. However, within a wide range of angles of attack, the calculated results of aerodynamic derivative method were inconsistent with the experimental data, due to the drastic changes of damping characteristics of lateral-directional aerodynamic moments with yaw-roll coupling ratios.     

基于SE模块改进Xception的动物种类识别

Xception是Inception网络的一种极端化表现,在与Inception v3参数相近的情况下,它能够达到更高的准确度。由于神经网络提取的特征不一定都是有用特征,因此以Xception为基础,将SE(Squeeze and Excitation）模块加入该网络,调整特征通道的权重,使得网络的精确度得到提高。通过实验,融合SE模块的Xception网络训练精确度分别在Oxford-IIIT Pet数据集和CUB_200_2011数据集上提升了1%~1.7%和0.8%~1%,证明了SE模块能够进一步提升Xception的精确度。将改进后的Xception应用到动物种类识别中,根据精确度曲线对实验策略调整改进,最终在测试集上获得95.63%的识别率。     

Design and analysis of a truss deployable antenna mechanism based on a 3UU-3URU unit

Space deployable structures with large calibers, high accuracy, and large folding ratios are indispensable equipment in the aerospace field. Given that the single-DOF 3RR-3RRR deployable unit cannot be fully folded, this study proposes a 3UU-3URU deployable unit with two kinds of DOF: folding movement and orientation adjustment. First, based on the G-K formula, the DOF of the 3UU-3URU unit is analyzed. Then, the 3UU-3URU unit is used to construct a deployable truss antenna with a curved surface, and the DOF of the whole deployable antenna containing multiple 3UU-3URU units is calculated. The structural design of a deployable antenna with two loops is carried out with specific parameters and geometric relations. Next, a DOF simulation of a basic combination unit composed of three 3UU-3URU units is performed. Finally, a prototype of the basic combination unit is manufactured, and the DOF of the mechanism is experimentally verified.     

A novel approach for predicting inlet pressure of aircraft hydraulic pumps under transient conditions

Cavitation caused by insufficient suction is a major factor that influences the life of aircraft pumps. Currently, pressurizing the tank can solve the cavitation problem under steady large-flow conditions. However, this method is not always effective under transient conditions (from zero flow to full flow in a very short time). Moreover, to apply and design other measures, such as a boost impeller, the suction dynamics during the transient period must be investigated. In this paper, a novel approach based on the pressure wave propagation theory is proposed for predicting the inlet pressure of an aircraft pump under transient conditions. First, a dynamic model of a typical aircraft pump is established in the form of differential equations. Then, the transient flow model of the inlet line is described using momentum and continuity equations, and the governing equations are discretized by the method of characteristics and the finite difference method. The simulated results are in good agreement with the results from verification tests. Further simulation analysis indicates that the wave velocity and transient time may influence the inlet and reservoir pressure as well as the size of the inlet line. Finally, solutions for upgrading the inlet pressure are discussed. These solutions provide guidelines for designing inlet installations.     

浅析民用飞机研制总体参数优化

分析了在概念设计阶段民用飞机总体设计工作内容和工作流程,并结合时下国外在用软件优缺点,构思了民用飞机总体设计参数综合优化的技术方案,包括优化设计架构、分析模型和优化算法等,为形成具有自主知识产权的民机总体设计综合分析和优化程序打下基础。     

关于大容量高速立式电机加装大转动惯量飞轮的设计研究

电机在发生事故突然失电时,为确保系统安全,要求电机能拖动设备依靠自身惯量,继续运转2 min。由于电机自身惯量远小于系统惯量要求,因此需在电机本体上加装大直径、大重量飞轮,以提供足够的惯量。在大容量、高速立式电动机加装大转动惯量飞轮后,电机的稳定运行变得至关重要,因此对电机自身的刚度、轴系及结构设计的合理性需进行验证。针对电机的关键点结构设计及计算,并通过现场运行,对电机的可靠性进行了验证。这为电机的工程运用提供参考。     

HB-2 high-velocity correlation model at high angles of attack in supersonic wind tunnel tests

Responding to a need for experimental data on a standard wind tunnel model at high angles of attack in the supersonic speed range, and in the absence of suitable reference data, a series of tests of two HB-2 standard models of different sizes was performed in the T-38 trisonic wind tunnel of Vojnotehnickˇi Institut(VTI), in the Mach number range 1.5–4.0, at angles of attack up to+30°. Tests were performed at relatively high Reynolds numbers of 2.2 millions to 4.5 millions(based on model forebody diameter). Results were compared with available low angle of attack data from other facilities, and, as a good agreement was found, it was assumed that, by implication, the obtained high angle of attack results were valid as well. Therefore, the results can be used as a reference database for the HB-2 model at high angles of attack in the supersonic speed range, which was not available before. The results are presented in comparison with available reference data, but also contain data for some Mach numbers not given in other publications.     

尖侧缘机身布局的俯仰力矩特性及扰流板控制

针对尖侧缘机身布局在大迎角下存在的正俯仰力矩（抬头力矩）问题,通过风洞试验,首先研究了俯仰力矩的迎角分区特性及流动演化规律：线性增长区（迎角为0°~15°）,俯仰力矩线性增加,全机从附着流到形成进气道前缘涡和机翼涡;非线性增长区（迎角为17.5°~32.5°）,俯仰力矩非线性增加,机头涡出现,机头涡和进气道前缘涡逐渐增强,机翼涡增强后破裂;衰减区（迎角为35°~65°）,俯仰力矩逐渐减小,机头涡增强后破裂,进气道前缘涡破裂发展,机翼涡完全破裂。其次,发现了机身前体是产生正俯仰力矩的主要来源,机头涡是导致大迎角下正俯仰力矩的主控流动。当迎角为40°时,前体各截面正俯仰力矩在进气道前缘处达到最大,主要是由于该处机头涡诱导产生了较强的法向力。最后,提出了大迎角机身扰流板控制技术,产生了较好的控制效果。当迎角为40°时,扰流板可使正俯仰力矩减少62%,其原因是扰流板降低了机头涡涡量及其诱导产生的法向力,减少了机身前体对正俯仰力矩的贡献。该控制技术的缺点是扰流板会带来一些升力损失和附加阻力。基于尖侧缘机身参考宽度的雷诺数为2.59×10⁵。     

运载火箭/航天器耦合分支模态综合法(下)

将运载火箭作为主结构、航天器作为分支子结构,分别采用自由界面模态展开定理和固定界面模态展开定理,导出分支模态综合法,进行运载火箭/航天器组合模型响应分析。进而,采用界面约束模态质量的界面加速度,导出航天器载荷估计方法,这时的运载火箭与航天器连接界面可以是静定的或静不定的。当仅考虑连接界面是静定的情况,界面约束模态质量将退化为界面刚体质量,导出采用刚体界面加速度的航天器载荷估计的方法,这个方法所导出的公式与Chen的方法完全相同,而Chen方法的公式是由有限元法导出的。提出一种航天器载荷瞬态分析新技术:一个以前的运载火箭/航天器组合系统的载荷分析结果可以用来获得被相同的运载火箭发射的新航天器结构的动态载荷,这种方法比Chen的"恢复瞬态分析"方法更简便。