悬停状态下直升机旋翼水滴撞击特性研究

介绍了直升机在悬停状态下,求解旋翼水滴撞击特性的数值方法.该方法根据直升机悬停状态下的准定常特性,对旋翼运动模型进行简化,并在对绕桨叶运动的气流场计算的基础上,采用有限差分方法求解水滴运动方程,得到水滴运动轨迹.进而,确定了水滴对旋翼表面的撞击特性参数,为旋翼防冰系统设计提供条件.最后,对NACA0012翼型的水滴撞击特性进行分析.      

机翼热气防冰系统设计

利用热流体系统仿真分析平台Flowmaster和计算流体力学软件Fluent进行联合仿真,对机翼热气防冰系统进行了设计和性能分析.设计参数包括防冰系统笛形管热气喷口孔径、孔数及孔间距等参数.基于Flowmaster对所设计的供气管路进行供气流量分配计算.基于Fluent模拟防冰腔内流动与换热,计算了防冰腔的热效率.根据防冰热载荷及热效率结果预测每段缝翼防冰所需热气流量,引入参数供气余度来分析防冰系统热性能.所提出的热气防冰系统设计方法可为热气防冰系统的工程设计与优化提供重要的帮助.     

一种临近空间高超声速飞行器翼舵干扰研究

在临近空间区域内飞行的高超声速飞行器对舵面操纵特性提出了严苛的要求,在高空高速条件下主翼对舵效有严重影响。通过风洞试验对带全动舵升力体的高超声速升阻特性进行了研究,发现由于主翼的遮挡效应,负舵偏比同舵偏值的正舵偏对升力体升阻特性影响更明显。数值模拟结果显示在舵偏角从-20°～20°变化过程中,由于主翼与舵面之间气流干扰造成舵面上下压差变化复杂,-12°～2°舵偏产生抬头铰链力矩,其余正负舵偏均产生低头铰链力矩,主翼后缘上表面的分离线随攻角增加逐渐前移,迎风面高压气流通过翼舵之间缝隙向上发展,使得舵上表面再附线后移,翼舵之间均有明显的横向流动。     

航空发动机进气支板电热防冰试验

为了研究电加热防冰的效果,开展了小型航空发动机进气支板的电加热防冰试验。结合该型号发动机进气支板的结构特点,设计了3种电热防冰加热布置方式,分别在支板沿轴向的不同位置采用1~3个电加热棒作为防冰热源。通过模拟不同的发动机进气结冰环境参数和电加热功率,在冰风洞中对3种电加热方式进行了防冰试验研究。通过布置在支板外表面的温度测点记录了防冰过程中支板表面的瞬态温度变化,分析了支板防冰过程中表面温度的变化特点。防冰试验研究了热源总功率、热源布置方式、液态水含量以及来流温度对支板防冰性能的影响。试验结果表明,合理的电加热方式可以取得较好的防冰效果,同时避免支板后部的溢流水结冰。     

×××机翼主梁的寿命分布研究

本文通过运用Ｗ∧２统计量的检验方法对ＸＸＸ飞机八个失效的机翼主梁寿命分布进行了检验,得出该主梁寿命分布为威布尔分布。     

Experimental investigation and correlation development of jet impingement heat transfer with two rows of aligned jet holes on an internal surface of a wing leading edge

Extensive experimental studies on the heat transfer characteristics of two rows of aligned jet holes impinging on a concave surface in a wing leading edge were conducted, where50000 Rej 90000, 1.74 H/d 27.5, 66° a 90°, and 13.2 r/d 42.03. The finding was that the heat transfer performance at the jet-impingement stagnation point with two rows of aligned jet holes was the same as that with a single row of jet holes or the middle row of three-row configurations when the circumferential angle of the two jet holes was larger than 30°. The attenuation coefficient distribution of the jet impingement heat transfer in the chordwise direction was so complicated that two zones were divided for a better analysis. It indicated that: the attenuation coefficient curve in the jet impingement zone exhibited an approximate upside-down bell shape with double peaks and a single valley; the attenuation coefficient curve in the non-jet impingement zone was like a half-bell shape, which was similar to that with three rows of aligned jet holes; the factors,including Rej, H/d and r/d, affected the attenuation coefficient value at the valley significantly.When r/d was increased from 30.75 to 42.03, the attenuation rates of attenuation coefficient increased only by 1.8%. Consequently, experimental data-based correlation equations of the Nusselt number for the heat transfer at the jet-impingement stagnation point and the distributionof the attenuation coefficient in the chordwise direction were acquired, which play an important role in designing the wing leading edge anti-icing system with two rows of aligned jet holes.     

水平表面气流剪切作用下的水膜厚度

飞机结冰表面上的液态水受气流吹拂作用会发生向后溢流,从而影响结冰区域范围及防冰系统设计;为了获得水膜流动规律,对水平平板表面上气流剪切驱动的水膜流动进行了实验测量和建模分析。通过水膜流动风洞试验台产生高速气流驱动水膜的流动,使用色散共焦位移计测量同一位置的水膜在不同时刻的厚度变化,结果表明气-液界面由底层薄水膜和多种尺度的波动组成,具有变化速度快随机性强的特点。通过水膜厚度随气流速度及水膜雷诺数的变化规律,发现平均水膜厚度与两者均呈现出单调非线性的依赖关系。基于薄水膜流动理论和平均水膜厚度实验结果,提出了高速气流剪切作用下的气-液波动界面剪切因子计算式,适用于风速17.8~52.2m/s,水膜雷诺数26~128之间的平板水膜流动计算。     

Sliding mode control design for oblique wing aircraft in wing skewing process

When the wing of Oblique Wing Aircraft (OWA) is skewed, the center of gravity, inertia and aerodynamic characteristics of the aircraft all significantly change, causing an undesirable flight dynamic response, affecting the flying qualities, and even endangering the flight safety. In this study, the dynamic response of an OWA in the wing skewing process is simulated, showing that the three-axis movements of the OWA are highly coupled and present nonlinear characteristics during the wing skewing. As the roll control efficiency of the aileron decreases due to the shortened control arm in an oblique configuration, the all-moving horizontal tail is used for additional roll and the control allocation is performed based on minimum control energy. Given the properties of pitch-roll-yaw coupling and control input and state coupling, and the difficulty of establishing an accurate aerodynamic model in the wing skewing process due to unsteady aerodynamic force, a multi-loop sliding mode controller is formulated by the time-scale separation method. The closed-loop simulation results show that the asymmetric aerodynamics can be balanced and that the velocity and altitude of the aircraft maintain stable, which means that a smooth transition is obtained during the OWA’s wing skewing.     

Effects of wing flexibility on aerodynamic performance of an aircraft model

The low-speed wind tunnel experiment is carried out on a simplified aircraft model to explore the influence of wing flexibility on the aircraft aerodynamic performance. The investigation involves the measurements of force, membrane deformation and velocity field at Reynolds number of 5.4 × 10⁴–1.1 × 10⁵. In the lift curves, two peaks are observed. The first peak, corresponding to the stall, is sensitive to the wing flexibility much more than the second peak, which nearly keeps constant. For the optimal case, in comparison with the rigid wing model, the delayed stall of nearly 5° is achieved, and the relative lift increment is about 90%. It is revealed that the lift enhanced region corresponds to the larger deformation and stronger vibration, which leads to stronger flow mixing near the flexible wing surface. Thereby, the leading-edge separation is suppressed, and the aerodynamic performance is improved significantly. Furthermore, the effects of sweep angle and Reynolds number on the aerodynamic characteristics of flexible wing are also presented.