仿真与响应曲面法的结合及其在综合生产计划中的应用

 论述响应曲面法与仿真相结合的优化结构,着重讨论了一阶和二阶响应曲面的仿真拟合原理和寻优过程,从而可在仿真环境下给出最优决策参数。利用所开发的GASPRSM仿真优化软件,对飞机工厂生产计划安排进行了仿真运行,证明可以取得显著的经济效果。     

铸造SiCp／ZL101复合材料的组织与性能

本文利用半固态搅拌铸造法制备了ＳｉＣｐ／ＺＬ１０１复合材料，对其组织和某些性能进行了研究，结果表明：ＳｉＣｐ在基体中分布均匀，无严重团聚现象，与基体结合良好，与基体合金相比，耐磨性，硬度有显著提高。     

三维有限元网格的自动划分

本文作者从研究结构的数学模型入手,讨论了建立三维结构有限元计算模型的方法。成功地获得了一些具有应用代表性的三维板壳和块体结构有限元计算网格的自动划分原理和算法。     

CARDC 2.4m引射式跨声速风洞设计与运行调试

中国空气动力研究与发展中心研制了可更换喷嘴的中压气体引射器 ,利用现有中压气源驱动 ,建成一座增压回流引射式跨声速风洞。试验段截面尺寸 2 .4m×2 .4m ,M =0 .3～ 1 .2。稳定段最高工作压力为 0 .45MPa ,最高模型试验雷诺数Rec=1 5× 1 0 6(M =0 .90 ,C =0 .2 4m) ,稳定吹风时间≥ 1 5s。风洞气动回路上分别配置有多喷管引射器、栅指扩散段、跨声速试验段驻室抽气系统及特殊的主排气系统等装置。采用智能自适应解耦控制技术 ,实现总压和M数独立、快速、精确地控制。该气动布局与部段配置及其功能设计 ,在国内跨声速风洞中均是首次采用。     

液压能源管路系统振动主动控制的理论研究

对飞机液压能源管路系统的振动问题进行了探讨.提出一种基于振动主动控制(VAC)技术对飞机液压能源管路系统进行消振的方法,在手段上采用压电/压电致伸技术,以压电陶瓷(PZT)作为作动器,具有驱动力大、响应频率高和体积小等优点;控制方法上采用参数寻优的控制策略,它能始终能根据外界干扰因素的变化来调整控制参数.经过理论分析和仿真验证,证明其具有良好的自适应性和鲁棒性,在变转速和变负载情况下始终能保持最佳的消振效果.     

GPS定时校频应用技术的基础研究

针对利用GPS进行定时校频技术开展了一系列的应用基础研究,包括GPS定时校频的方法及其不确定度、定时校频数据的处理等。在给出实验结果的同时,对影响GPS定时精度的各种因素(包括SA影响)进行了讨论;同时对提高GPS定时精度的途径作了初步探讨。     

A survey of radio jets with Chandra and HST

Relativistic jets are a common property of radio-loud Active Galactic Nuclei (AGN). Understanding jet physical properties is an essential precursor to understanding the mechanisms of energy transport, and ultimately, how energy is extracted from the central black hole. In this paper, I highlight recent developments from Chandra and HST observations of kpc-scale jets in AGN, with particular emphasis on our survey of 17 radio jets in a sample of FRII radio galaxies. These observations show that (1) X-ray and optical emission is common from kpc-scale jets, (2) a large fraction of the bolometric luminosity is emitted at X-rays, and (3) in most sources, a candidate emission process for the X-rays is inverse Compton scattering of the Cosmic Microwave Background off the relativistic electrons in the jet. If the latter scenario holds, the implication is that jets are still relativistic on kpc scales.     

Numerical simulations of water spray on flame deflector during the four-engine rocket launching

This paper aims to study on the cooling effect with two types of water spray nozzle on the flame deflector during the four-engine launch vehicle take-off. To accurately simulate the two-phase flow of the rocket gas with multispecies and the water spray, the three-dimensional compressible Navier-Stokes equations, discrete ordinates methods and realizable k-Ɛ turbulence model are used to establish the rocket supersonic plumes impact model. The Eulerian dispersed phase (EDP) model was used to simulate the water spray into the exhaust gas. The accuracy and effectiveness of the gas-liquid flow model are verified by a good agreement between simulation results and experimental data. On this basis, a series of numerical simulation studies under different water injection position are performed. The results show that the high temperature regions, along the axis of engines on the deflector plate, have no significant temperature decreasing effect by water spray from the nozzles mounted on the apex of the deflector, and the high temperature converts a large quantity of water into vapor near the plume boundary, which would decrease the flow conductivity. With the cooling spray nozzle fixed directly to the deflector plate, the temperature decrease effect is obvious and the effect of thermal shock on deflector plate induced by exhaust plume is reduced, so that it can prevent the flame deflector from thermal ablation. The study results provide indepth information and engineering guidance for designing the water spray systems and increasing the safety of the launch process.     

DME脉冲调制信号波形参数对空间频谱占用的影响分析

航空测距器DME的开发、调试和性能验证都要用到高斯双脉冲调制格式的DME信号。由于专用的DME信号模拟器技术复杂、价格昂贵,人们常用具有快沿双脉冲调制功能的模拟信号源替代。本文以航空测距器DME信号要求为依据,初步分析了这种替代可能存在的问题,并通过实验对不同边沿条件下高斯双脉冲、矩形双脉冲调制信号的功率频谱占用情况进行了验证。     

试飞员能力模型研究

在飞行器研制和人类飞行探索中,试飞员的能力至关重要。针对以往对试飞员能力的评价基本停留在"客观、正确、诚信、能力以及尊重他人"等主观、感性层面,分析了试飞员在飞行器研制试验与鉴定中的作用和任务,给出了试飞员能力模型和"百分制"对试飞员的计划、飞行、评价、报告和建议等基本能力的量化分配。将试飞员能力显性化,有利于试飞员能力的客观评价。