Ti2AlNb基合金的ISM熔炼研究

讨论了Ti2AlNb基合金的熔炼特点,概括介绍了真空水冷铜坩埚感应凝壳熔炼的设备结构原理和工艺技术,结合Ti2AlNb基合金的熔炼实践,研究了合金元素的加入形式、熔炼室真空度对合金铸锭的均匀性以及合金中Al挥发烧损的影响规律。结果表明:采用水冷铜坩埚真空感应凝壳熔炼Ti2AlNb基合金,合金铸锭成分均匀性很好,随着熔炼工艺的不同,Al挥发烧损在5％～10％（质量分数）之间。     

固体燃料冲压发动机硼燃料的燃烧

本文介绍了固体燃料冲压发动机(SFRJ)中硼燃烧的特点及改善燃烧效率的一些措施.     

基于超纯水电解加工的水解离机理研究

介绍了一种以超纯水为电解液的电解加工工艺方法,即超纯水电解加工技术.研究了阳离子交换膜在超纯水中的水解离机理及工作特性,分析其在超纯水电解加工过程中的作用机理,并进行了水解离试验研究.结果表明：电流密度达到了3.7 A/cm^2,电场强度约为2 MV/m,已进入微细电解加工去除材料要求范围,为超纯水微细电解加工的应用奠定了基础.     

Present-Day Sea Level Change: Observations and Causes

We investigate climate-related processes causing variations of the global mean sea level on interannual to decadal time scale. We focus on thermal expansion of the oceans and continental water mass balance. We show that during the 1990s where global mean sea level change has been measured by Topex/Poseidon satellite altimetry, thermal expansion is the dominant contribution to the observed 2.5 mm/yr sea level rise. For the past decades, exchange of water between continental reservoirs and oceans had a small, but not totally negligible contribution (about 0.2 mm/yr) to sea level rise. For the last four decades, thermal contribution is estimated to about 0.5 mm/yr, with a possible accelerated rate of thermosteric rise during the 1990s. Topex/Poseidon shows an increase in mean sea level of 2.5 mm/yr over the last decade, a value about two times larger than reported by historical tide gauges. This would suggest that there has been significant acceleration of sea level rise in the recent past, possibly related to ocean warming. This revised version was published online in August 2006 with corrections to the Cover Date.     

超音速燃烧室燃烧效率数学模型及气流状态参数的计算

本文分析及提出了超音速燃烧冲压发动机燃烧室燃烧效率的数学模型.该模型综合了氢气喷射方式、燃烧室进口气流参数以及燃烧室结构的影响因素.用这一数学模型求解一组一元流方程.计算出通过燃烧室的气流状态参数,计算结果与试验数据对比,证明这个模型是适用的.     

三维侧面突扩燃烧室冷态气流场的数值模拟

本文对四侧30°进气并带有进气管道和尾喷口的突扩燃烧室冷态气流场进行了数值模拟.对这种复杂非规则边界的计算区域,首次采用分段算法进行计算.结果表明:分段算法可以提高网络利用率,缩短机时,消除虚假扩散,提高计算准确度,计算结果与试验结果基本符合.     

金属水反应水冲压发动机系统性能估算

使用金属／水反应燃料是推进水下超高速航行器的最佳途径，分析了单次注水和二次注水的铝／水反应燃料水冲压发动机系统，得出了燃料质量配比、燃烧室温度、燃烧室压强、系统有效推力、效率等关键技术性能指标。指出了二次注水系统的优越性并提出了一种二次注水系统的实施方案。分析结论与实际系统性能指标相吻合，证明了分析的正确性，可以为系统研究提供参考。     

Numerical simulations of water spray on flame deflector during the four-engine rocket launching

This paper aims to study on the cooling effect with two types of water spray nozzle on the flame deflector during the four-engine launch vehicle take-off. To accurately simulate the two-phase flow of the rocket gas with multispecies and the water spray, the three-dimensional compressible Navier-Stokes equations, discrete ordinates methods and realizable k-Ɛ turbulence model are used to establish the rocket supersonic plumes impact model. The Eulerian dispersed phase (EDP) model was used to simulate the water spray into the exhaust gas. The accuracy and effectiveness of the gas-liquid flow model are verified by a good agreement between simulation results and experimental data. On this basis, a series of numerical simulation studies under different water injection position are performed. The results show that the high temperature regions, along the axis of engines on the deflector plate, have no significant temperature decreasing effect by water spray from the nozzles mounted on the apex of the deflector, and the high temperature converts a large quantity of water into vapor near the plume boundary, which would decrease the flow conductivity. With the cooling spray nozzle fixed directly to the deflector plate, the temperature decrease effect is obvious and the effect of thermal shock on deflector plate induced by exhaust plume is reduced, so that it can prevent the flame deflector from thermal ablation. The study results provide indepth information and engineering guidance for designing the water spray systems and increasing the safety of the launch process.     

OSIRIS-REx low-velocity particles during outbound cruise

We analyzed high-angular rate streaks first recorded by OSIRIS-REx’s MapCam during a 2017 search for Earth Trojan asteroids. We interpret them as water-ice particles that translated across the imager’s field of view, originating from the spacecraft itself. Their translation velocities approximated 0.1–1?m/s based on reasonable conclusions about their range. Pursuing several lines of investigation to seek a coherent hypothesis, we conclude that the episodic releases of the water ice particles are associated with spacecraft attitudes that resulted in solar illumination of previously shadowed regions. This correlation suggests that the OSIRIS-REx spacecraft itself possesses micro-climatic zones consisting of hot regions and cold traps that may temporarily potentially pass volatiles back and forth before losing most of them.     

流场可压缩性对涡相互作用影响的数值研究

涡相互作用作为冲压发动机喷注装置的典型抽象流动现象,研究其可压缩性影响对于认识包含化学反应的真实燃料喷射场具有一定基础理论价值。基于经过数值验证的可压缩Navier-Stokes算法与压力泊松方程初始条件设置方法研究流场可压缩性对涡相互作用演化过程的影响。结果表明,以较高涡旋马赫数表征的可压缩性在改变涡对形态的同时,具有延缓涡旋相互靠近,迟滞融合进程的作用。关于涡对系统开始融合的临界条件,可压缩相互作用开始的临界展弦比与无量纲时间相比于低速涡对明显提高。为在无量纲时间意义下统一不同马赫数涡对相互作用的进程,从涡心密度随时间变化规律出发在不可压涡对特征时间的基础上,初步构建了考虑可压缩性的时间尺度修正关系。