Total column water vapor estimation over land using radiometer data from SAC-D/Aquarius

The aim of this study is retrieving atmospheric total column water vapor (CWV) over land surfaces using a microwave radiometer (MWR) onboard the Scientific Argentine Satellite (SAC-D/Aquarius). To research this goal, a statistical algorithm is used for the purpose of filtering the study region according to the climate type.A log-linear relationship between the brightness temperatures of the MWR and CWV obtained from Global Navigation Satellite System (GNSS) measurements was used. In this statistical algorithm, the retrieved CWV is derived from the Argentinian radiometer’s brightness temperature which works at 23.8?GHz and 36.5?GHz, and taking into account CWVs observed from GNSS stations belonging to a region sharing the same climate type. We support this idea, having found a systematic effect when applying the algorithm; it was generated for one region using the previously mentioned criteria, however, it should be applied to additional regions, especially those with other climate types.The region we analyzed is in the Southeastern United States of America, where the climate type is Cfa (Köppen - Geiger classification); this climate type includes moist subtropical mid-latitude climates, with hot, muggy summers and frequent thunderstorms. However, MWR only contains measurements taken from over ocean surfaces; therefore the determination of water vapor over land is an important contribution to extend the use of the SAC-D/Aquarius radiometer measurements beyond the ocean surface. The CWVs computed by our algorithm are compared against radiosonde CWV observations and show a bias of about ?0.6?mm, a root mean square (rms) of about 6?mm and a correlation of 0.89.     

凝结水回收的节能效益及技术问题

通过对凝结水及其余热回收的经济效益分析,提出了凝结水回收具有重要的节能作用,并从技术上阐述了凝结水回收的方法及技术措施,以便在实际设计、施工中给予重视。     

西安市自来水中铝离子的安全性分析

根据西安市各水厂的供水情况，选择具有代表性的曲江水厂为研究对象，对水中的铝离子含量及健康危害风险进行了研究，发现该厂自来水中铝离子超标率为9％，尽管对人体的健康危害风险值在人们可接受范围内，但其最大值已经和人们最大可以接受的风险值在同一数量级。     

姿控推进系统发动机关机的管路瞬变特性

从一维液体瞬变管路方程出发,采用有限差分格式的特征线方法,针对某姿控推进系统发动机真实氧化剂管路的关机瞬变特性进行了数值研究,对系统不同部位的动态特性进行了计算,喷注前的最大瞬变压力达到储箱压力的3倍,得到的结果与试车数据是一致的,对液体发动机管路工程设计具有参考价值,表明该方法可以方便地对包括许多管路,阀门和推力室的复杂系统进行动态特性分析。     

Detection of regolith buried water stream channels on Mars with the help of synthetic aperture radar

A major theme in the study of Mars is the search for evidence that water was present in the past or is present today, either at or below the surface. Biological life is connected to water. Hence much research is focused on the detection of water stream channels, which in the past flowed on Mars. In these areas, the petrified remains of the former life on Mars may be found. These channels may be under the regolith layer; however, the radio wave penetrating ability allows for the detection of these channels under the regolith.     

海流对出水空泡演化过程影响机理数值研究

采用数值仿真手段,重点针对海流对空泡演化过程的影响开展研究,形成考虑海流影响的空泡多相流理论与数值计算方法,分析了海流流向及流速影响,获得了海流对空泡发展演化的作用机制及对航行体流体动力特征的影响规律。研究结果表明:航向海流对溃灭阶段的空泡形态变化影响较为明显,不同海流工况下,泡内水、气分布有所不同,高压产生次序及溃灭过程的流动结构变化也因此不同。横向海流作用下的空泡形态差别不大,受到合成来流方向发生偏转的影响,迎流面向横向来流方向偏斜,造成空泡形状不对称。     

3D打印技术在水冷板加工中的应用研究

目前,3D打印技术在各行业得到了广泛的应用,探讨和研究3D打印技术在空空导弹中的应用具有重要的意义.简要介绍了3D打印技术概念、原理和材料,重点介绍了水冷板进行3D打印加工过程,打印成功的水冷板通过检验、加工、装配,满足结构设计要求.3D打印能够缩短水冷板加工周期,降低加工成本.     

两级对置式离心压气机湿压缩研究

本文以两级对置式离心压气机为对象,采用数值模拟方法研究了湿压缩对压气机特性和内部流场的影响。数值计算借助ANSYS CFX软件,采用欧拉-拉格朗日法耦合计算连续流场和离散粒子项,基于k-ε湍流模型、变比热拟合公式计算焓熵值,利用安托万方程求解饱和蒸汽压力并加入液滴破碎CAB模型和撞壁模型。在压气机进口采用干空气和不同喷水量与粒径组合共计7个工况条件下,对比分析了压气机总体性能变化、部件性能变化及水滴的运动轨迹。结果表明,湿压缩使得整机压比和效率均有所提高,但效果越好裕度越小。低压级内湿压缩效果明显,水滴蒸发使得出口温度降低;高压级湿压缩降温增益不明显,但受上一级冷却效果影响,压比和温比都增加。水滴在叶轮中主要积聚在叶片压力面根部。扩压器和回流器中产生了较大的尾迹损失,扩压器前缘受水滴破碎和掺混作用,产生较大熵增。     

One-week habitation of two humans in an airtight facility with two goats and 23 crops – Analysis of carbon,oxygen, and water circulation

Human habitation and animal holding experiments in a closed environment, the Closed Ecology Experiment Facilities (CEEF), were carried out. The CEEF were established for collecting experimental data to estimate carbon transfer in the ecosystem around Rokkasho nuclear fuel reprocessing plant. Circulation of O₂ and CO₂, and supply of food from crops cultivated in the CEEF were conducted for the first time in the habitation experiments. Two humans known as eco-nauts inhabited the CEEF, living and working in the Plant Module (PM) and the Animal and Habitation Module (AHM), for a week three times in 2005. On a fresh weight basis, 82% of their food was supplied from 23 crops including rice and soybean, cultivated and harvested in the PM, in the 2nd and 3rd experiments. For the goats, the animals held in the experiments, all of their feed, consisting of rice straw, soybean plant leaves, and peanut shells and peanut plant leaves, was produced in the PM in the 2nd and 3rd experiments. The O₂ produced in the PM by photosynthesis of the crops was separated by the O₂ separator using molecular sheaves, then accumulated, transferred, and supplied to the AHM atmosphere. The CO₂ produced in the AHM by respiration of the humans and animals was separated by the CO₂ separator using solid amine, then accumulated, transferred, and supplied to the PM atmosphere. The amount of O₂ consumed in the AHM was 46–51% of that produced in the PM, and the amount of CO₂ produced in the AHM was 43–56% of that consumed in the PM. The surplus of O₂ and the shortage of CO₂ was a result of the fact that waste of the goats and the crops and part of the human waste were not processed in these habitation experiments. The estimated amount of carbon ingested by the eco-nauts was 64–92% of that in the harvested edible part of the crops. The estimated amount of carbon ingested by the goats was 36–53% of that in the harvested inedible part of the crops. One week was not enough time for determination of gas exchange especially for humans and animals, because fluctuation of their gas exchange was quite high. The amount of transpired water collected as condensate was 818–938 L d⁻¹, and it was recycled as replenishing water compensating transpiration loss of nutrient solution. The amount of waste nutrient solution discharged from the PM was 1421–1644 L d⁻¹. The waste nutrient solutions from rice and other crops were processed through micro filters (MFs) separately. The MF filtrated solutions were processed with reverse osmosis (RO) membrane filter separately and divided into filtrated water and concentrated waste nutrient solution. The concentrated waste nutrient solution from the crops other than rice was processed through an ultra-micro filter (UF) and reused, although that from rice was discharged in 2005. Concentrations of nutritional ions in the UF filtrated solution were determined, the depleted ions were added back, the UF filtrated solution was diluted with the RO membrane filtrated water, and the nutrient solution for the crops other than rice was regenerated. The nutrient solution for rice was newly made each time, using concentrated solution from an external source and the RO membrane filtrated water. Average amounts of water used in the AHM (L d⁻¹) were determined as follows: drinking by humans (filtrated water), 1.5; cooking, etc. (filtrated water other than for drinking), 14.3; drinking by goats, 3.8; showering (hot water), 13.2; showering (cold water), 0.1; washing of hand and face and brushing teeth, 4.1; washing of dishes, dish clothes and towels, 36.4; and washing of animal holding tools, 0.3. The waste water was processed by a RO purification system and recycled for toilet flushing and animal pens washing. A circulation experiment for water was started in 2006 and a circulation experiment for waste materials is planned for 2007. In 2006, a single duration of the air circulation experiments was 2 weeks, although the human habitants were changed after 1 week.