测量旋涡脱落频率的实验研究

本文提出了一种由表面摩擦测量旋涡脱落频率的方法,阐述了其原理,给出了实验研究的结果,可作为涡街式流量计测量旋涡脱落频率的一种途径。     

Instability and unsteadiness of aircraft wake vortices

This paper presents a review of theoretical and experimental results on stability and other unsteady properties of aircraft wakes. The basic mechanisms responsible for the propagation and the amplification of perturbation along vortices, namely the Kelvin waves and the cooperative instabilities, are first detailed. These two generic unsteady mechanisms are described by considering asymptotic linear stability analysis of model flows such as vortex filaments or Lamb–Oseen vortices. Extension of the linear analysis to more representative flows, using a biglobal stability approach, is also described. Experimental results obtained using LDV, hot wire and PIV in wind tunnels are presented and they are commented upon the light of theory.     

修正曲率及雷诺正应力对分离流的影响

应用Ｓｔｒａｗｎ＆．Ｋｌｉｎｅ的准同时粘性／无粘流匹配模型，于动量积分布方程中加入了曲率和雷诺正应力两个二阶修正项，计算了二维不可压湍流附面层分离流地。文中首先分析推导了新的曲率修正公式，给出了两个算例，比较了修正项对计算结果的影响，并与实验做了对比。     

涡流阀几何参数对固体发动机推力调节特性的影响

为了获得涡流阀参数对发动机推力调节性能的影响规律,针对涡流阀的加注方式以及几何结构,利用建立的基于涡流阀方案的固体火箭发动机推力可调实验系统开展了实验研究。通过实验结果的分析,得到了加注环孔径、涡流室高度和直径以及中心进气面积的不同对涡流阀调节性能的影响规律。结果表明:适当降低涡流室的高度、较大的中心进气面积、较大的涡流室直径有利于提高涡流阀的调节性能。因此,可以通过对涡流阀结构的优化设计来提高发动机的推力调节性能。     

双圆柱斜向排列时旋涡脱落频率的实验研究

本研究用热线风速仪测量了斜向排列双圆柱的尾迹,并分析了尾迹中某些特征点上的速度频谱,从旋涡脱落频率的规律来研究双圆柱绕流相互之间的干扰。当两圆柱间距较远时,速度振荡的频率与单圆柱卡门涡街的频率相接近,随着两圆柱间距的接近,前、后圆柱各有其不同的旋涡脱落频率,且都不同于单圆柱旋涡脱落的频率。特别是当两圆柱处于某一相对位置时,出现双峰值的功率谱,其中一个峰值的频率大大地高于另一个峰值对应的频率,而且这两个峰值谁主谁副是不确定的,呈现出不稳定流动的特性。     

Flow mechanism between purge flow and mainstream in different turbine rim seal configurations

The rim seal is used to prevent mainstream ingestion to the gap between the vane of a turbine and its blade. In this article, the dolphin lip with a hook configuration and a large seal cavity with hook structures are designed based on the high-pressure turbine datum single shark lip rim seal configuration. The sealing effect and parameters of the flow field are measured by an experiment method and a numerical simulation is used to explain the mechanism. For three configurations, the effect of the leakage slot vortex on the efficiency of the seal and the influence of leakage vortex, generated by the interaction between purge flow and mainstream flow, are discussed in depth. The result shows that the reverse vortex formed by the dolphin lip rim seal with hook structure will increase the sealing efficiency. The seal configuration with a large cavity improves sealing efficiency to a greater extent than the datum structure. At different purge flow rates and with unequal seal structures, the purge flow produces three types of leakage vortices in the passage. Besides, the seal configuration with dolphin lip produces a Kelvin-Helmholtz instability at the interface of the purge and the mainstream flows at a low purge flow rate to induce new leakage vortex branches in the passage of the blade.     

Dynamic modeling and analysis of vortex filament motion using a novel curve-fitting method

Applications of a novel curve-fitting technique are presented to efficiently predict the motion of the vortex filament, which is trailed from a rigid body such as wings and rotors. The governing equations of the motion, when a Lagrangian approach with the present curve-fitting method is applied, can be transformed into an easily solvable form of the system of nonlinear ordinary differential equations. The applicability of Be′zier curves, B-spline, and Lagrange interpolating polynomials is investigated. Local Lagrange interpolating polynomials with a shift operator are proposed as the best selection for applications, since it provides superior system characteristics with minimum computing time, compared to other methods. In addition, the Gauss quadrature formula with local refinement strategy has been developed for an accurate prediction of the induced velocity computed with the line integration of the Biot–Savart law. Rotary-wing problems including a vortex ring problem are analyzed to show the efficiency, accuracy, and flexibility in the applications of the proposed method.     

基于浸入边界法的低雷诺数流固耦合数值模拟(英文)

提出一种基于SIMPLE算法的非定常流固耦合计算方法。流体Navier-Stokes方程空间采用非结构化网格有限体积法离散,时间项采用了欧拉隐式方法。利用浸入式边界方法模拟静止或者运动固体区域,流固界面作用力通过流体体积(VOF)方法进行处理。从而可以用固定网格求解任意复杂区域中的流固耦合作用。本文模拟了低雷诺数静止及振荡圆柱绕流,所得结果与文献中贴体网格计算结果吻合,从而验证了本文方法的合理性和正确性。     

尾缘锯齿降低叶栅噪声的数值模拟

采用大涡模拟与声类比的方法研究了尾缘锯齿对涡轮叶栅噪声的影响.设计了两种不同的尾缘锯齿,对比了Re=3.3×105(基于叶片弦长与叶栅出口速度)下两种不同结构锯齿尾缘叶栅与直尾缘叶栅的声功率.结果表明:尾缘锯齿可以降低叶片吸力面边界层分离噪声约5dB,降低尾缘涡脱落噪声约10dB.进一步的研究表明,尾缘锯齿可以降低叶片尾缘附近表面的压力脉动幅值约50%,将展向相关尺度较大的涡破碎成展向相关尺度较小的涡,并消除尾缘脱落涡,这三者的综合作用使噪声得到降低.      

基于 LES 方法的增升装置气动噪声特性分析

在气动噪声数值计算中,流场的求解精度对涡流扰动的细节计算以及声学的求解结果有着重要的影响。本文应用 LES 方法对增升装置的流场进行数值模拟,采用可穿透积分面的 Ffcows Wil1iams-Hawkings(FW-H)积分方法进行远场噪声计算。采用圆柱绕流算例对本文的数值计算方法进行了验证,验证结果表明：本文所使用的LES 方法能准确地捕捉到涡脱落、流动分离等非定常流动现象,可为远场气动噪声的计算提供精确的近场流动的数值解;基于 FW-H 的声类比方法能够精确高效求解远场气动噪声。在此基础上,对增升装置噪声产生的流动特性、远场特性、风速影响等进行了数值模拟研究。结果表明：缝翼产生气动噪声的主要原因是,流动在缝翼和主翼之间的凹槽形成的不稳定波以及缝翼钝后缘的小脱落涡;襟翼产生气动噪声的主要原因是,襟翼附近由于流动分离产生的高频的小尺度不稳定涡和低频的大尺度涡。