无线电高度表自动测试与诊断系统

论述了一个基于 GPIB总线测试诊断系统 ,它既可对被测对象进行总体性能测试 ,又可对测试对象进行故障定位 ,系统的通用性和自动化程度较高 ,可应用于部队设备的测试、诊断和维修。     

Simultaneous observations of the plasma density on the same field line by the CPMN ground magnetometers and the Cluster satellites

By applying the cross-phase method and the amplitude-ratio method to magnetic field data obtained from two ground stations located close to each other, we can determine the frequency of the field line resonance (FLR), or the field line eigenfrequency, for the field line running through the midpoint of the two stations. From thus identified FLR frequency we can estimate the equatorial plasma mass density (ρ)$(\rho )$ by using the T05s magnetospheric field model [Tsyganenko, N.A., Sitnov, M.I. Modeling the dynamics of the inner magnetosphere during strong geomagnetic storms, J. Geophys. Res. 110, A03208, 2005] and the equation of Singer et al. [Singer, H.J., Southwood, D.J., Walker, R.J., Kivelson, M.G. Alfven wave resonances in a realistic magnetospheric magnetic field geometry, J. Geophys. Res. 86 (A6) 4589–4596, 1981].     

固体火箭发动机地面试验测量系统研究

针对固体火箭发动机地面试验,基于柔性试验架建立试验设备,应用虚拟仪器技术搭建通用测量硬件平台,使用LabVIEW7.1开发了一套包含参数控制、参数标定、数据测量、数据处理在内的发动机地面试验通用测量软件,从而建立了发动机测量系统.该测量系统可同步监测整个固体火箭发动机工作过程,能够满足发动机地面试车性能检测高精度要求,具有快速反映整个试车过程的能力和节省数据处理时间等优点.     

阵列NaI（T1）探测器γ能谱合成方法探讨

介绍两路或多路NaI（T1）探测器γ能谱数据的合成方法及初步成果，以“特征峰叠加”的方法对^133Cs和^60Co的仪器谱进行单峰和双峰的叠加试验，为天然γ能谱合成提供依据。实验表明，“特征峰叠加”的方法可较好地反映各仪器谱合成前的特性，有很好的应用前景。     

Development of a thin section device for space exploration: Overview and system performance estimates

In this paper we present a conceptual design of a spaceborne instrument for the in situ production of rock thin sections on planetary surfaces. The in situ Automated Rock Thin Section Instrument (IS-ARTS) conceptual design demonstrates that the in situ production of thin sections on a planetary body is a plausible new instrument capability for future planetary exploration. Thin section analysis would reduce much ambiguity in the geological history of a sampled site that is present with instruments currently flown. The technical challenge of producing a thin section device compatible with the spacecraft environment is formidable and has been thought too technically difficult to be practical. Terrestrial thin section preparation requires a skilled petrographist, several preparation instruments that individually exceed typical spacecraft mass and power limits, and consumable materials that are not easily compatible with spaceflight. In two companion papers we present research and development work used to constrain the capabilities of IS-ARTS in the technical space compatible with the spacecraft environment. For the design configuration shown we conclude that a device can be constructed that is capable of 50 sample preparations over a 2 year lifespan with mass, power, and volume constraints compatible with current landed Mars mission configurations. The technical requirements of IS-ARTS (mass, power and number of samples produced) depend strongly on the sample mechanical properties, sample processing rate, the sample size and number of samples to be produced.     

基于惯性定位定向的高铁轨检仪分析研究

根据高铁轨道静态检测的测量需求,设计了一种利用定位定向技术的0级轨检仪,并详细阐述了其构成和工作原理,介绍了其特点。通过对比性分析论证,优选了一种测量精度高、操作方法简单且可大幅度提高测量效率的设计方案。理论仿真表明该系统测量精度能够达到优于1.3mm/km的水平。根据理论仿真结果搭建了原理简易验证设备,结合高铁测控网的测量基准,在一段高铁的弯道铁轨上进行了验证测试,测试结果表明采用定位定向技术的0级轨检仪具备实际工程化的潜力,以及提高测量效率和精度的能力。     

遥科学—提高空间技术效益的新途径

本文讨论了遥科学的起源及其相关技术，特别是遥科学与空间搭载实验的密切关系；描述了遥科学的基本内容和遥科学实验台的基本结构；在综述国外研究现状的基础上，阐明了中国开展遥科学研究的意义，可行性和技术途径。遥科学是对现有相关技术的集成和提高，是一项具有深远意义的现实可行技术。     

航天器热平衡试验及其虚拟试验技术

文章从热平衡试验的目的出发,讨论了热平衡试验的平衡判据、航天器热数学模型和试验验证;展望了将真实试验与虚拟试验相结合的航天器热平衡试验的发展趋势:不仅热平衡试验的工况大为减少,每个工况的时间大为缩短,而且试验方法将会发生根本变化。     

提高电子仪器电磁屏蔽性能的方法

要提高电子仪器可靠性，对电磁干扰和抗干扰技术需要进一步研究。有关电子仪器电磁屏蔽的机理和设计方法在本文中作了介绍。     

导弹天线罩自动测试系统的设计与实现

为了对导弹天线罩电性能参数进行准确测量，利用虚拟仪器技术，采用LabView软件平台，通过多线程技术，实现一套基于测量仪器和转台协调工作的天线罩自动测试系统的设计。该设计充分挖掘了矢量网络分析仪器内在功能，可同时测量并导出四个通道的八组数据，可同时完成比幅、比相等功能，极大提高了对天线阵列等测试对象的测量效率、测试精度；可以实时显示测量数据的二维图或三维图，有利于实时掌握测试情况。本系统很好地满足了实验需要，它的实现为微波自动测试系统的设计提供了很好的借鉴。