Impact vibration reduction for flexible manipulators via controllable local degrees of freedom

When performing operation tasks, the interaction between a flexible manipulator and a grasped object usually results in an impact. In this paper, a new way is suggested to alleviate impact vibration of a flexible manipulator via its structural characteristic when capturing a moving object. Controllable local degrees of freedom are introduced to the topological structure of the flexible manipulator, and used as an effective tool to combat impact vibration through dynamic coupling. A corresponding method is put forward to reduce impact vibration responses of the flexible manip- ulator via the controllable local degrees of freedom. By planning motion of the controllable local degrees of freedom, appropriate control force can be constructed to increase the modal damping and stiffness and eliminate the exciting force simultaneously, thereby reducing impact vibration responses of the flexible manipulator. Simulations are conducted and results are shown to prove the presented method.     

轻小型光纤陀螺抗干扰技术

轻小型光纤陀螺内部干扰严重影响了其正常工作.干扰可导致陀螺输出死区,产生周期性噪声和输出非线性等现象.抑制干扰对提升陀螺性能和环境适应能力有重要的意义.对干扰的形成机理进行了理论分析,并提出了一些抑制干扰的方案.     

航天微波部件的无源互调抑制方法研究进展

无源互调(passive intermodulation,PIM)问题广泛存在于大功率微波无源部件及系统中,对卫星及地面通信系统造成严重的干扰.无源互调抑制方法是无源互调基础研究和工程应用中的重点关注领域,是解决无源互调问题的核心关键.在阐述无源互调产生机理的基础上,分别从工艺、结构、电设计及信号处理等多个方面系统地归...     

基于FIR滤波器及分数阶重复控制的变频空调压缩机电流谐波抑制方法

变频空调压缩机在低频运行时存在着较大的电流谐波。当采用普通重复控制器时,由于采样频率与电流谐波基频的比值不一定为整数,使得重复控制器内模与电流谐波基频存在偏差,导致普通重复控制器电流谐波抑制能力下降。针对该问题,采用基于固定采样频率的分数阶重复控制策略。首先,采用Lagrange插值定理去逼近分数延时环节;其次,采用FIR滤波器替代低通滤波器减小相位引起的误差;最后,针对分数阶重复控制器的相位滞后特性,分别进行低、中、高频段相位补偿。试验结果表明,提出的控制策略能够有效地抑制变频空调压缩机低频运行时的电流谐波。     

Design and feedforward control of large-rotation two-axis scan mirror assembly with MEMS sensor integration

As a key component of electro-optical systems, a Two-axis Scan mirror AssemblY(TSAY) is usually used for Line-of-Sight(LOS) precision pointing, tracking, scanning, and stabilizing. Therefore, it is necessary for a TSAY to have a large angular range, high dynamic characteristics, and small mirror surface distortion. Furthermore, vibration from carriers of electro-optical systems, such as spacecraft and airplanes, is inevitable, so it is critical to guarantee the control accuracy of a TSAY under vibration. In this paper, a TSAY prototype is designed and developed. To increase the control bandwidth, structural topology optimization is applied to the TSAY's elliptical mirror to reduce the moment of inertia, meanwhile keeping surface flatness. A flexible hinge is adopted to achieve a large angular range. To suppress the angular perturbation caused by the base linear vibration, an adaptive feedforward loop with base-integrated Micro-Electro-Mechanical System(MEMS) accelerators is constructed to enhance the TSAY's feedback loop. Simulation and experimental results show that the TSAY prototype's two-axis mechanical angular ranges are more than ±3.2°, the mirror surface flatness Root Mean Square(RMS) value is better than 0.04 k, and the closed-loop bandwidth is beyond 330 Hz. These are suitable for most applications. Besides, the angular perturbation caused by the base vibration can be suppressed more than 37.7% with the addition of the adaptive feedforward loop.     

部件冷却对二元俯仰矢量排气系统红外特征抑制实验

实验测试了采用中心锥气膜冷却和喷管冲击-气膜冷却的二元俯仰（2D-CD）矢量排气系统,在几何偏转0,10,20°三种角度下,壁面温度和红外辐射特征分布,并与未冷却状态进行了对比分析。结果表明:前密后疏的气膜孔排布形式可有效减小热侧面高温区域大小。中心锥冷却时,密流比为0.8条件下壁面冷却效率达45%~63%,排气系统尾向±10°范围内红外辐射强度下降20%;但是由于冷气流注入,导致下游壁面（隔热屏、喷管）温度升高,在30°探测方向上红外辐射强度上升15%。喷管冷却时,收敛段（密流比为0.25）冷却效率达19%~33%,扩张段（密流比为0.65）冷却效率达75.5%~83.5%,侧壁段（密流比为0.65）冷却效率达78%~90%,导致在排气系统尾向15°~75°范围内,红外辐射强度下降30%以上,最大降幅达80%（几何偏转20°,宽边探测面30°探测方向）。      

微重状态下带有隔板的球形贮箱内液体晃功特性的研究

本文研究了微重环境下带有隔板的球形腔体内液体晃动动力学利用特征函数展开法,得到了自由振动和受迫振动解进而求出了液体振动的频率及液体晃动的等效力学模型,并给出了液体对腔壁的反力和反力矩.将数值结果和无隔板的球形贮箱内液体晃动参数作了比较,表明加隔板后有明显的防晃效果.      

基于电涡流位移传感器的钛合金叶片振动疲劳试验研究

为了研究钛合金叶片振动疲劳特性,基于电磁振动测试平台和非接触式电涡流位移传感器,开展了试验工装和试验程序设计.通过本文的传感器标定和振动应力标定方法研究,发展了基于电涡流位移传感器的非接触测量式钛合金叶片振动疲劳试验手段,进而完成了疲劳考核试验和裂纹扩展试验,研究了裂纹长度和固有频率随疲劳循环数累积的变化规律.试验结果...     

压气机叶片受外物损伤的剩余振动疲劳寿命

采用电磁涡流激振的振动疲劳试验,对TC4材料制成的平板叶片受外物损伤后的剩余振动疲劳寿命进行了研究。结果表明,叶片的外物损伤程度取决于撞击能量E和几何标度S,对于一定的叶片,存在不影响疲劳寿命的极限损伤。对叶片损伤处进行修复和适当减小叶片振动应力水平是提高叶片抗外物损伤能力的的有效途径。通过钢钛叶片试验分析表明,由于设计叶片稳态应力水平通常以抗拉强度为参考基点,那么钢制叶片的疲劳强度的富裕程度相对要高些。