基于特征空间变换的运载火箭Pogo模型降阶方法

针对运载火箭Pogo状态空间模型存在维数高和奇异性的问题,开展了 Pogo模型的降阶方法研究.基于特征空间变换理论,导出了一般形式的Pogo状态空间模型的解耦形式.该形式与推进系统和结构系统的模态频率相对应,从而通过模态截断或保留感兴趣的模态实现有效的模型降阶.同时,还给出了降阶方法的实数运算公式.在两种不同型号推进系...     

模拟打伤/抛修缺口对TC17钛合金叶片振动疲劳性能的影响

研究了无缺口、打伤缺口和3种抛修缺口对TC17钛合金叶片振动疲劳性能的影响.结果表明,无缺口模拟叶片的疲劳寿命最长且寿命分散性最小,打伤缺口模拟叶片的疲劳寿命最短且寿命分散性最大,3种抛修缺口模拟叶片的疲劳寿命介于前两者之间,其中抛修缺口Ⅰ模拟叶片的疲劳寿命最长.无缺口和抛修缺口模拟叶片的疲劳裂纹均起源于叶片根部,打伤...     

Virtual sensing method for monitoring vibration of continuously variable configuration structures using long short-term memory networks

Vibration monitoring by virtual sensing methods has been well developed for linear time-invariant structures with limited sensors. However, few methods are proposed for Time-Varying (TV) structures which are inevitable in aerospace engineering. The core of vibration monitoring for TV structures is to describe the TV structural dynamic characteristics with accuracy and efficiency. This paper propose a new method using the Long Short-Term Memory (LSTM) networks for Continuously Variable Configuration Structures (CVCSs), which is an important subclass of TV structures. The configuration parameters are used to represent the time-varying dynamic characteristics by the “freezing” method. The relationship between TV dynamic characteristics and vibration responses is established by LSTM, and can be generalized to estimate the responses with unknown TV processes benefiting from the time translation invariance of LSTM. A numerical example and a liquid-filled pipe experiment are used to test the performance of the proposed method. The results demonstrate that the proposed method can accurately estimate the unmeasured responses for CVCSs to reveal the actual characteristics in time-domain and modal-domain. Besides, the average one-step estimation time of responses is less than the sampling interval. Thus, the proposed method is promising to on-line estimate the important responses of TV structures.     

振动控制中的理想特征结构及其最优配置

本文依据系统响应与其特征结构的关系，提出了振动控制的最优反馈特征结构配置方法，它针对结构承受的载荷，利用多目标优化理论，确定系统的理想特征结构，并文献的方法配置初始反馈，为了达到最优控制，文中建立了满足理想特征结构配置的目标函数，并且将保证最优控制的Ｌｙａｐｕｎｏｖ方程作为约束条件，使得反馈在满意的控制品质下，消耗的控制能最小。     

颤振主动抑制中的非线性问题

本文采用谐波平衡法,定量地解释了机翼颤振主动抑制风洞试验中出现的极限环现象。提出了比较精确的计及极限环基阶谐波与三阶谐波的分析计算方法。指出在采用液压舵机的情况下,伺服阀的不灵敏区是出现极限环现象的一个主要原因。     

Multi-objective optimization of frequency and damping of vertical stabilizer skin structure placed with variable-angle tows

The vibration characteristics of composite vertical stabilizer skin structures play a critical role in damping effects designed for overcoming the air disturbances experienced by aircraft structural components during flight. The first-order fundamental frequencies and their corresponding damping characteristics of the vertical stabilizer skin structure tow-steered by automatic fiber placement technique were optimized with the parameterized trajectories and plies as design variables. Firstly, the vibration and damping numerical models were derived based on Kirchhoff laminate theory, the Rayleigh-Ritz method, and the Strain Energy Method. Then the optimization model was developed by adopting the self-adaptive Differential Evolution Multi-objective optimization algorithm and incorporating the solution method of Pareto Front. The constraints of this optimization model considered the experimentally obtained minimum turning radius of prepregs tow-steered in automatic fiber placement process obtained from experimental tests. Finally, the comparison of numerical simulation results was conducted for the optimized trajectories and the conventional straight trajectories under various boundary conditions, and the numerical results were partially validated through damping and frequency tests. The results indicate the vibration characteristics of the composite vertical stabilizer skin structure can be enhanced to a large extent by optimizing fiber trajectories, and the enhancement percentage is affected by the boundary conditions of the actual structure.     

关键参数对二冲程煤油发动机爆震的影响

针对二冲程汽油发动机改用航空煤油后的爆震抑制和性能恢复进行了研究,利用GT-Power软件建立发动机的一维仿真模型并对煤油发动机的爆震进行了预测和优化。仿真结果表明:推迟点火时刻、远低于和远大于理论空燃比的混合气对爆震都有一定的抑制作用,试验结果验证了仿真结果的正确性。提出并采用协同推迟点火和增加喷油的控制策略进行试验研究。试验结果表明:在低转速大负荷工况下,爆震可被有效抑制,节气门全开时功率恢复在90%以上。发动机转速为5 500 r/min时,功率恢复能达到原机的95.7%。      

大型桥式机床立柱不同材料的特性分析

采用数值计算方法,比较了混凝土、铸铁和钢3种不同材料立柱的静载抗压能力以及冲击力下的瞬态响应,分析数据表明,钢立柱具有最好的承压能力,在相同压力下静变形最小;由于阻尼的原因,混凝土立柱的振幅受到明显限制,冲击力作用下振动衰减的较快,在更加关注减振性能的高速高性能加工领域,采用混凝土立柱是更好的选择.     

磁悬浮控制力矩陀螺高速转子高频自激振动的抑制

磁悬浮控制力矩陀螺（CMG）中转子一阶弹性模态自激振动是影响磁悬浮高速转子系统稳定性的关键因素之一.自激振动通常可以采用陷波器（NF）进行抑制,然而引入NF或改变其参数以及转子转速的变化均会改变模态自激频率,因而难以直接准确地确定NF参数.本文提出一种仿真确定NF参数的方法,通过转子弹性模态缩减建模和模态参数确定得到准确的弹性转子动力学模型,进而采用闭环仿真优化确定NF中心频率和极点阻尼.采用该方法设计的NF有效抑制了转子的高频弹性模态自激振动,使得磁悬浮CMG转子可以稳定升速到24000r/min.实验结果验证了该方法的实用性和有效性.     

振动技术在复合固体推进剂浇注工艺中的应用

为了克服在复合团体推进剂浇注过程中采用的常规真空浇注工艺的缺陷，采用了振动浇注技术。对６种配方的高粘度丁羟推进剂进行了实验研究，得出了适用的振动频率和加速度范围。该浇注技术已应用于某小型发动机装药生产中，成品合格率达１００％。