导弹子母弹子弹抛撒弹道模型及数字仿真

建立了导弹子母弹抛撒弹道模型，并编制了抛撒弹道仿真程序，仿真结果与靶场试验结果一致，仿真程序也适用于所有弹道导弹子母弹撒 轴对称子弹的无控弹道仿真，可为地地导弹子母作战使用及作战效能研究提供强有力的分析工具。     

电离层峰区的等离子体漂移

根据垂测数据、利用伺服模式讨论了中低纬上空电离层峰区等离子体垂直漂移速度的日变化形态及其随不同季节和不同纬度等的变化规律。揭示了漂移速度的凌晨凹陷与日出凸起现象,指出了可能的形成机制。     

测控站点电磁兼容分析与预测技术研究

本文介绍了对测控站点内各测控设备的电磁干扰进行分析和预测的方法。系统采用干扰源与接收机逐对考虑的方式，极大简化了计算。并采用分阶段预测的方法，即分成：快速筛选、幅度筛选、频率筛选和详细预测四个阶段进行逐阶段分析和预测。     

A data-driven approach to modeling high-density terminal areas: A scenario analysis of the new Beijing,China airspace

Airports are being developed and expanded rapidly in China to accommodate and pro-mote a growing aviation market. The future Beijing Daxing International Airport (DAX) will serve as the central airport of the JingJinJi megaregion, knitting the Beijing, Tianjin, and Hebei regions together. DAX will be a busy airport from its inception, relieving congestion and accommodating growth from Beijing Capital International Airport (PEK), currently the second busiest airport in the world in passengers moved. We aim to model terminal airspace designs and possible conflicts in the future Beijing Multi-Airport System (MAS). We investigate standard arrival procedures and mathematically model current and future arrival trajectories into PEK and DAX by collecting large quantities of publicly available track data from historical arrivals operating within the Beijing terminal airspace. We find that (1) trajectory models constructed from real data capture aberrations and deviations from standard arrival procedures, validating the need to incorporate data on histor-ical trajectories with standard procedures when evaluating the airspace and (2) given all existing constraints, DAX may be restricted to using north and east arrival flows, constraining the capacity required to handle the increases in air traffic demand to Beijing. The results indicate that the termi-nal airspace above Beijing, and the future JingJinJi region, requires careful consideration if the full capacity benefits of the two major airports are to be realized.     

Hypersonic reentry trajectory planning by using hybrid fractional-order particle swarm optimization and gravitational search algorithm

This paper proposes a novel hybrid algorithm called Fractional-order Particle Swarm optimization Gravitational Search Algorithm (FPSOGSA) and applies it to the trajectory planning of the hypersonic lifting reentry flight vehicles. The proposed method is used to calculate the control profiles to achieve the two objectives, namely a smoother trajectory and enforcement of the path constraints with terminal accuracy. The smoothness of the trajectory is achieved by scheduling the bank angle with the aid of a modified scheme known as a Quasi-Equilibrium Glide (QEG) scheme. The aerodynamic load factor and the dynamic pressure path constraints are enforced by further planning of the bank angle with the help of a constraint enforcement scheme. The maximum heating rate path constraint is enforced through the angle of attack parameterization. The Common Aero Vehicle (CAV) flight vehicle is used for the simulation purpose to test and compare the proposed method with that of the standard Particle Swarm Optimization (PSO) method and the standard Gravitational Search Algorithm (GSA). The simulation results confirm the efficiency of the proposed FPSOGSA method over the standard PSO and the GSA methods by showing its better convergence and computation efficiency.     

含滑行时间约束的真空段弹道设计研究

由于动力系统及测控资源的约束,工程中存在着末级两次点火但滑行时间受限的运载火箭真空段弹道设计问题。基于线性引力场的假设,引入含滑行时间约束的切换条件,从而将含固定滑行时长的弹道优化问题转换成对两点边值问题的迭代求解和对运动方程的积分,并通过多个算例仿真验证了该方法的正确性和有效性。同时,研究了迭代过程中滑行段不同弹道预报方法对弹道设计的影响,结果显示较高的预报精度可以获得更优的弹道设计结果。该方法提供了一种新的弹道设计思路,在总体方案论证或初步设计阶段可以替代传统设计方法,以有效提升弹道设计效率,优化火箭方案。     

叶片磨抛机器人力/位混合控制的设计与实现

为提高航空类发动机叶片的自动化磨抛精度,减小复杂曲面叶片加工轨迹控制误差,采用基于六维力传感器的机器人力/位混合控制策略,实现机器人磨抛轨迹的在线修正。搭建以Staubli机器人和ATI六维力传感器为核心部件的叶片磨抛验证平台,通过C++开发上位机,采集磨抛过程中六维力传感器信息并进行Kalman滤波。通过示教确定机器人运动轨迹,对机器人运动轨迹与力传感器信息进行采集分析,确定基于力/位混合控制可以实现机器人运动轨迹的在线修正,为复杂曲面的叶片磨抛轨迹控制提供一种解决方案。     

High-fidelity trajectory optimization for aeroassisted vehicles using variable order pseudospectral method

In this study, the problem of time-optimal reconnaissance trajectory design for the aeroassisted vehicle is considered. Different from most works reported previously, we explore the feasibility of applying a high-order aeroassisted vehicle dynamic model to plan the optimal flight trajectory such that the gap between the simulated model and the real system can be narrowed. A highly-constrained optimal control model containing six-degree-of-freedom vehicle dynamics is established. To solve the formulated high-order trajectory planning model, a pipelined optimization strategy is illustrated. This approach is based on the variable order Radau pseudospectral method, indicating that the mesh grid used for discretizing the continuous system experiences several adaption iterations. Utilization of such a strategy can potentially smooth the flight trajectory and improve the algorithm convergence ability. Numerical simulations are reported to demonstrate some key features of the optimized flight trajectory. A number of comparative studies are also provided to verify the effectiveness of the applied method as well as the high-order trajectory planning model.     

航天产品非金属材料/ 制品贮存寿命评估技术

从非金属材料老化机理与寿命预测模型、老化行为表征技术、贮存环境试验与寿命评估技术等方面,概述了国内外的技术发展和现状,介绍了航天产品用非金属材料及制品贮存寿命评估技术的发展及其应用进展。