基于被动二次流的射流偏转比例控制

射流偏转比例控制一直是流体式推力矢量(FTV)技术所追求的目标之一。本文研制了一种二元流体式推力矢量喷管,采用能量消耗极小的被动二次流与Conada壁面相结合的方式对低速主射流进行矢量偏转控制,通过改变喷管控制缝入口面积实现了主射流偏转的连续比例控制。对低速主射流两侧控制缝压力和射流偏转角进行测量,获得了主射流偏转角随两侧控制缝压力差系数变化的控制规律曲线。结果表明:低速主射流最大偏转角达到19°,在偏转范围内控制曲线分为敏感区和迟钝区。敏感区的控制曲线近似线性,斜率较大,范围约为±15°;而迟钝区的控制曲线斜率较小,在两侧15°~19°的范围内。该结果证实了主射流两侧的压力差是造成其偏转的直接原因。     

Robust control for constant thrust rendezvous under thrust failure

A robust constant thrust rendezvous approach under thrust failure is proposed based on the relative motion dynamic model. Firstly, the design problem is cast into a convex optimization problem by introducing a Lyapunov function subject to linear matrix inequalities. Secondly, the robust controllers satisfying the requirements can be designed by solving this optimization problem.Then, a new algorithm of constant thrust fitting is proposed through the impulse compensation and the fuel consumption under the theoretical continuous thrust and the actual constant thrust is calculated and compared by using the method proposed in this paper. Finally, the proposed method having the advantage of saving fuel is proved and the actual constant thrust switch control laws are obtained through the isochronous interpolation method, meanwhile, an illustrative example is provided to show the effectiveness of the proposed control design method.     

可调进口导叶和叶片角向缝处理机匣相互作用的

可调进口导叶和叶片角向缝处理机匣都能扩大压气机的稳定工作范围,为了分析同时采用这两种措施对压气机稳定性的影响及二者之间相互作用的机理,在单转子轴流压气机实验台上对不同导叶弯角下实壁机匣和叶片角向缝机匣进行了详细的实验测试。同时,对导叶弯角为+10°的每一种机匣结构和导叶0°的实壁机匣结构进行了数值模拟,数值模拟结果与实验结果符合良好,相对于导叶0°的实壁机匣,实验及数值模拟结果均表明,导叶正弯角结合叶片角向缝机匣处理结构能更好地扩大压气机的稳定工作裕度。对转子流场进行对比分析可得,导叶正预旋能抑制叶背气流的分离,提高压气机的稳定工作范围,但仍然没有改变转子叶尖部诱发失速的流动现象,而叶片角向缝主要是通过对叶顶气流的抽吸作用抑制了间隙泄漏流达到扩稳效果,因此耦合时能独立发挥各自的扩稳作用,从而能获得比单独使用任何一种方法都要更大的稳定工作范围的提升。     

基于SysML的反推力系统安全性分析

通过应用系统工程建模工具SysML(系统建模语言),对反推力系统的使用场景进行建模,分别建立起反推力系统的用例图和顺序图模型.在使用场景模型的基础上,进一步应用HAZOP(危险和可操作性)分析方法对使用场景进行危险分析,得到了反推力系统在使用中可能存在的危险状态,并提出了相应的安全性要求.此方法应用表明,综合SysML...     

航空发动机室内台架推力测量修正方法研究

为解决缺少标准发动机而不能对试车台进行定期校准来确定试车台推力修正值的问题,通过数据统计分析方法,得到台架的发动机推力修正值;通过台架气动流场参数测试,计算出气动冲量、喷口负压和迎风阻力等对发动机推力的影响,并根据验证统计数据,分析了推力修正值的合理性。     

Effects of adiabaticity and non-adiabaticity of dust charge fluctuation on the propagation of the dust ion acoustic waves in inhomogeneous dusty plasma

A theoretical investigation has been made for adiabatic positive and negative dust charge fluctuations on the propagation of dust-ion acoustic waves (DIAWs) in a weakly inhomogeneous, collisionless, unmagnetized dusty plasmas consisting of cold positive ions, stationary positively and negatively charged dust particles and isothermal electrons. The reductive perturbation method is employed to reduce the basic set of fluid equations to the variable coefficients Korteweg–de Vries (KdV) equation. Either compressive or rarefactive solitons are shown to exist depending on the critical value of the ion density, which in turn, depends on the inhomogeneous distribution of the ion. The dissipative effects of non-adiabatic dust charge variation has been studied which cause generation of dust ion acoustic shock waves governed by KdV-Burger (KdVB) equation. The results of the present investigation may be applicable to some dusty plasma environments, such as dusty plasma existing in polar mesosphere region.     

战斗机推力矢量关键技术及应用展望

战斗机推力矢量技术可极大地扩展战斗机使用包线,提升飞行安全性,增强飞机作战能力,是航空领域的重要关键技术,是先进战斗机的典型标志之一。该技术涉及气动、进排气、发动机和飞行控制等多个领域,其综合实现是一项跨领域、紧耦合、高风险的系统工程。本文回顾了战斗机推力矢量技术的发展历程,分析了关键技术体系,结合中国首架轴对称推力矢量验证机的工程实践,阐述了大迎角内外流气动设计、推力矢量发动机、综合飞/发控制和战斗机过失速机动飞行验证等关键技术,展望了推力矢量技术对作战效能的贡献及未来的应用方向。     

变拓扑多臂航天器高效统一动力学建模

针对多臂航天器在轨操控过程中可能存在的多链、闭环、环链混合等多种拓扑构型及相应的动力学模型变化,提出基于空间算子代数理论(SOA)的高效统一动力学建模方法。首先,提出了描述多臂航天器部件连接关系的构型参数,并基于构型参数提出了多臂航天器拓扑构型描述矩阵的自主生成方法。其次,基于空间算子代数理论,将通路矩阵与空间转移算子相结合,提出了变拓扑多臂航天器统一动力学建模方法。最后,将数值仿真结果与多体动力学仿真软件的仿真结果进行比对,验证所提方法的有效性。仿真结果表明,对于不同的拓扑结构,所提出的O(n)阶统一动力学建模方法能准确描述变拓扑情况下的多臂航天器动力学响应。     

喷嘴式隔板与纵向肋式隔板阻尼效应分析

利用声学模型和单喷嘴声学模拟试验研究了喷嘴式隔板的耗散机理;用数值方法分析了纵向肋式隔板周围的涡流;用声学理论研究了纵向肋式隔板的声场。研究结果表明:选取合适的管间隙将会使喷嘴式隔板具有更好的稳定性作用;肋片周围是涡流产生的主要区域;肋高对燃烧室声学特性的影响远大于肋长。     

Independent modal variable structure fuzzy active vibration control of thin plates laminated with photostrictive actuators

Photostrictive actuators can produce photodeformation strains under illumination of ultraviolet lights. They can realize non-contact micro-actuation and vibration control for elastic plate structures. Considering the switching actuation and nonlinear dynamic characteristics of photostrictive actuators, a variable structure fuzzy active control scheme is presented to control the light intensity applied to the actuators. Firstly, independent modal vibration control equations of photoelectric laminated plates are established based on modal analysis techniques. Then, the optimal light switching function is derived to increase the range of sliding modal area, and the light intensity self-adjusting fuzzy active controller is designed. Meanwhile, a continuous function is applied to replace a sign function to reduce the variable structure control (VSC) chattering. Finally, numerical simulation is carried out, and simulation results indicate that the proposed control strategy provides better performance and control effect to plate actuation and control than velocity feedback control, and suppresses vibration effectively.