飞机发动机短舱降载轻量化设计方法研究

为了进一步提升发动机短舱的传载效率,通过研究国内外飞机发动机短舱安装及载荷传递路径,同时借鉴、比对了成熟的国内外发动机短舱结构连接形式,以飞机的发动机短舱为研究对象,采用三维数字建模、有限元仿真等分析方法,建立了短舱传递和不传递发动机扭矩的两种结构形式,并对短舱参与传载比例进行了计算分析,最终通过试验验证了轻量化新结构形式的有效性,实现了基于柔性连接结构设计技术的发动机短舱降载轻量化目标,为进一步工业化、批产化提供技术支持。     

某型发动机进口压力畸变实验研究与分析

发动机进口流场畸变是影响发动机稳定性的一个很关键的降稳因子,而进口压力场周向分布不均匀对燃气涡轮发动机的稳定工作范围有很大影响.通过对某型涡喷发动机进行进口压力畸变模拟实验,探讨了发动机进口流场压力畸变的实验程序和方法,通过对实验数据的分析和处理,确定了该型发动机的稳定性对进气压力畸变的敏感程度.     

利用相似周方法预测第24活动周开始时间

利用相似周方法对第24活动周的开始时间与第23活动周下降相后期的太阳黑子数进行了预报.根据第23周已经出现的特征参量和下降相的形态特征,选取9,10,11,15,17和20等六个太阳活动周作为第23周下降相的相似周,对第24周开始时间进行预报.预报结果显示,第24活动周的开始时间为2007年5±1月,黑子数平滑月均极小值为7.1±2.6,第23太阳活动周长度为11.1年.与其他研究者的预报结果相比较,本文给出的结果与文献[11]和[12]及MSFC的结果比较一致.通过对相似周方法在下降相预测太阳活动周结束时间的研究讨论,及对第23周上升阶段的太阳黑子数和F10.7平滑月均值预报结果的评估,可以看出,相似周预报方法在太阳活动周长期预报中是很有应用价值的.      

Integration of high-fidelity model of forward variable area bypass injector into zero-dimensional variable cycle engine model

Forward Variable Area Bypass Injector (FVABI) is one of key components which contributes to modulate the cycle parameters of Variable Cycle Engine (VCE) under various operation conditions. The modeling method of zero-dimensional FVABI was reviewed and its deficiency was analyzed based on FVABI flow characteristic. In order to improve the accuracy of VCE performance simulation, the high-fidelity modeling method of FVABI was developed based on its working characteristics. Then it was coupled with the zero-dimensional VCE model and the multi-level VCE model was built. The results indicate that the geometric and aerodynamic parameters can affect the interaction between the two airflows and the zero-dimensional FVABI model is too simple to predict the component performance accurately, especially when the FVABI inner bypass is chocked. Based on the performance curves for single bypass mode and the regression model of multi-scale support vector regression for double bypass mode, the high-fidelity model can predict FVABI performance accurately and rapidly. The integration of high-fidelity FVABI model into zero-dimensional VCE model can be done by adjusting iterative variables and balance equations. The multi-level model has good convergence and it can predict VCE performance when the FVABI inner bypass is chocked.     

Effect of scavenge port angles on flow distribution and performance of swirl-loop scavenging in 2-stroke aircraft diesel engine

Swirl-Loop Scavenging (SLS) improves the performance of 2-stroke aircraft diesel engine because the involved swirl may not only benefit the scavenging process, but also facilitate the fuel atomization and combustion. The arrangement of scavenge port angles greatly influences in-cylinder flow distribution and swirl intensity, as well as the performance of the SLS engine. However, the mechanism of the effect and visualization experiment are rarely mentioned in the literature. To further investigate the SLS, Particle Image Velocimetry (PIV) experiment and Computational Fluid Dynamics (CFD) simulation are adopted to obtain its swirl distribution characteristics, and the effect of port angles on scavenging performance is discussed based on engine fired cycle simulation. The results illustrate that Reynolds Stress Turbulence model is accurate enough for in-cylinder flow simulation. Tangential and axial velocity distribution of the flow, as well as the scavenging performance, are mainly determined by geometric scavenge port angles α_geom and β_geom. For reinforcement of scavenging on cross-sections and meridian planes, α_geom value of 27° and β_geom value of 60° are preferred, under which the scavenging efficiency reaches as high as 73.7%. Excessive swirl intensity has a negative effect on SLS performance, which should be controlled to a proper extent.     

高背压等离子点火器及其液体燃料点火特性实验研究

航天应用的液体火箭发动机及燃烧型加热器燃烧室室压高、燃料流量大、温度低、有重复启动需求,实现安全可靠点火的难度较大.针对这些需求,研究了一种采用高背压设计的电弧等离子体点火器.实验研究了Ar,N2气体工质在高进气压力下的伏安特性,发现N2在宽压力范围内适用于点火.发射光谱分析表明,在高达数MPa的进气压力下,Ar,N2...     

基于ISIGHT的某型飞机发动机短舱防火结构设计

以某型发动机短舱为研究对象,依据 CCAR-25-R4适航条款要求,对短舱结构进行了防火区域的界定为考核短舱防火结构的受力状况,建立短舱后段防火结构有限元模型,完成了5种工况下的有限元分析:综合计算结果,选取其中最严重受力工况,结合发动机的安装和维护需求,开展短舱后段防火结构优化分析:最后以短舱中典型的钛合金防火平板、焊接板2种结构为例,开展了结构防火试验。试验结果表明,防火结构有良好的防火性,满足飞机设计要求。通过以上的结构优化、材料性能试验等流程,最终形成了一套短舱防火结构设计方法,降低了结构重量,加快了设计流程。     

脉动压力测量技术在火箭发动机试验中的应用

为研究和探索火箭发动机地面试验推力室脉动压力测量方法和数据分析技术,介绍了火箭发动机试验中脉动压力测量系统的组成和参数的测量方法;分析了引压导管的动态特性及其对脉动压力参数测量的影响;采用齐平安装的方式,按照所述方法建立脉动压力参数测量系统;结合推力室多个振动测点的数据,分别采用快速傅里叶变换(FFT)和小波包分解两种...     

变推力发动机仿真计算分析

分析了变推力发动机采用的双调模式,用流量调节器控制推进剂流量。流量定位针栓式喷注器控制喷注压降,保证喷注速度基本不变。根据发动机系统特点建立了主要组件的数学模型,并根据模型进行了仿真计算,最后对发动机前管路流阻影响进行了分析。     

微型涡喷发动机燃烧室设计研究

设计了微型环型燃烧室,并对其燃烧过程进行数值模拟,同时根据模拟结果对燃烧室进行了优化设计及二次计算.计算中入口边界参数采用等熵数值计算结果,喷雾性能参数通过试验获得,考虑了湍流化学反应、热辐射、液滴的蒸发及二次雾化等情况,计算结果可以较为准确地反映燃烧室的实际燃烧情况.对优化设计前后的模拟结果进行比较分析,结果表明优化后的燃烧室设计合理,燃料可以充分燃烧,各项性能参数基本符合设计要求,能够为燃烧室的进一步优化设计提供改进依据.