脉冲噪声下基于梯度加权平均的变步长NLMP算法

针对非高斯 α 稳定分布噪声环境下的自适应滤波问题,提出一种新的基于梯度加权平均的变步长归一化最小平均p范数(VSS-NLMP)算法。该算法基于梯度矢量能够跟踪自适应过程的均方权值偏差(MSD)这一特点,通过对梯度矢量的平滑减小梯度噪声的影响,然后利用平滑梯度矢量的欧氏范数和系统误差的分数低阶矩控制步长的变化。文中给出了新算法的迭代过程,然后对其收敛性进行简要分析,仿真结果表明,本文新算法较现有变步长NLMP算法具有更快的收敛速度和更高的稳态精度。     

一种单室双推力发动机装药Ⅱ界面粘接性能研究

根据单室双推力发动机装药的特点,对厚度绝热层、衬层的预反应及预固化衬层在真空状态下垂直存放等绝热衬层加工工艺条件对装药Ⅱ界面粘接性能的影响进行了研究,并提出了改善界面性能的技术途径。     

空间机械臂关节零部件对关节总刚度的影响分析

大型空间机械臂关节用大传动比多级行星齿轮传动的复杂性给刚度分析和减小质量都带来了困难,用传统的有限元法进行关节刚度分析还需解决复杂的建模问题。文章针对上述问题,采用集中参数法和刚度串联原理建立了复杂传动系统关节等效刚度的计算模型,分析了各级齿轮扭转刚度对关节总扭转刚度的影响,为空间机械臂大传动比关节的轻量化高刚度优化设计提供了技术途径。     

挠性航天器姿态机动的变论域自整定模糊PID控制

建立了带有太阳翼的挠性航天器的姿态动力学模型,应用改进的罗德里格参数来描述姿态运动学模型。针对挠性航天器模型参数不确定性和环境干扰等问题,提出了变论域自整定模糊比例积分微分(PID)控制方案,构建了计算简单并且可以达到控制精度的伸缩因子。基于Matlab/Simulink进行了仿真验证,结果表明,变论域自整定模糊PID 控制响应速度比传统PID控制、模糊PID控制快350s,且无超调,不仅能够使航天器完成对目标姿态的机动,而且能够有效地抑制挠性太阳翼的振动。     

端板对叶梢负载桨空化性能影响数值分析

为了探究端板对尾流收缩叶梢负载（CLT）桨空化性能的影响,本文基于Star-ccm+软件对CLT(Contracted and Loaded Tip)桨P1727的端板变参数模型进行了空化计算,计算采用DDES湍流模型和Schnerr-Sauer 空化模型,通过对E779A标准模型桨进行计算,验证了该方法的有效性。研究表明：桨叶表面空化区域与低压区域基本一致,空化区域的范围与推力损失程度呈正相关变化趋势;在端板有效抑制梢部绕流的情况下,端板长度和宽度对CLT桨的敞水性能和空化特性影响微弱;端板倾角对敞水性能和空化特性影响较大,倾角越大,推力和扭矩越大,空化发生时推力衰减程度越大。     

Design and analysis of a novel hinged boom based on cable drive

Hinged booms are widely used in astrophysics missions; however, the trajectory and deployment velocity are difficult to control because they are usually driven by springs, which limits their application in narrow spaces. Thus, a novel hinged boom is highly required to achieve motion controllability. Through an equivalent substitution between the cable drive loop and the binary link in topology, a type synthesis method for the cable-driven single-degree-of-freedom chain is proposed based on the s...     

Simplification approaches for multi-level load spectra by using equivalent damage rule

Reasonable and effective fatigue load spectrum is key of aircraft structural fatigue test. Two kinds of load spectra simplification approaches based on statistical consistent fatigue damage model are proposed in the paper. One method is to simplify the original multi-level load spectra to spectral load with fewer level and was verified by the experimental data of five levels and seven levels load spectra. The equivalent damage here is not equivalent fatigue life, but equivalent number of spectral blocks. Moreover, it was proved that a section of low stress load cannot be converted into the highest stress load considering equivalent damage. The other is to convert the life distribution under multi-level load spectra into that of constant amplitude spectrum according to a certain principle, that is, equivalent damage is achieved through equivalent fatigue life, and two groups of three levels spectral data were used for experimental verification. The results show that equivalent damage simplification approach of multi-level load spectra is feasible, and it achieve that the damage of one loading block before and after the simplification is equal in probability statistics. The life distribution of load simplified as constant amplitude spectrum is consistent with test data. The simplification method presented in this paper can be generalized and is a predictive engineering method which does not depend on experimental data.     

基于变频供电系统试验的模拟负载及控制的设计与研究

在民用飞机变频供电系统的设计和适航符合性验证试验中,负载特性的模拟是一项关键技术,为适应变频供电系统负载特性的综合测试和验证对负载模拟的符合性需求,论述了一种适应变频供电环境下的变频模拟负载作为模拟飞机115/200V、(360～800Hz)三相四线制变频供电系统负载的综合电气特性,并为之设计智能控制系统。通过在线优化阻抗参数,提高负载的闭环特性和自适应能力,确保变频供电系统负载电气特性参数测试的准确性。     

一个新的研究领域——演化硬件

演化硬件的概念最初是由HugodeGaris于1992年提出的。硬件演化的目的在于使硬件系统能够像生物一样改变其自身的结构以适应环境的变化。本文首先给出演化硬件的定义,继而介绍演化硬件的物质基础──可编程专用集成电路和演化硬件的理论基础──演化算法。进而研究实现硬件演化的方法,最后讨论演化硬件的发展前景。     

非线性变结构解耦控制及对再入飞行器的应用

讨论了一类非线性系统的变结构解耦控制在再入飞行器的应用,变结构解耦控制号输入输出线性比相结合得到的控制规律,可对象模型的不确定有鲁棒性,对于再入飞行器再入段存在的多变量非线性和参数不确定,应用了相应的变结构解耦控制的方法,讨论了其滑模面的构造方法和解耦控制条件,在姿态控制中保证了姿态跟踪期望值,在轨迹跟踪中,设计了内外回路在控制律,内回路运用变结构解耦控制保持姿态稳定,外回路通过设计比例微分控制保