扩压器-水泵内非稳定流动研究

水泵内部流动实质上是复杂的三维非稳定流动 ,它对水泵性能及结构振动有重要影响。本文介绍了一种求解这种复杂内流动的数值方法。三维雷诺数平均的纳维斯托克斯方程 ( 3-DReynolds-averaged Navier-Stokes,RANS)以及标准 k-ε的方程用于描述水泵内非定常紊流流场。系统特性方程与水泵的 CFD模型相结合以考虑流体在管道中的加速 ;采用任意滑移网格界面模拟叶轮和静止部件之间的相互干涉 ;将整个叶轮作为分析对象 ,以考虑失速情况下流动的周向非对称。这些技术的结合包括了水泵内非稳定流动的物理实质。一台实验数据比较齐全的离心式 -扩压器水泵被用于验证所提出的数值方法     

火箭发动机－超音速扩压器－蒸汽引射泵组合式高空模拟试验系统的性能研究

通过对火箭发动机－超音速扩压器－蒸汽引射泵组合式高模拟系统的理论分析和实验研究，提出了扩大ＧＳ－１高空模拟试车台试验能力的几项新方案。     

五种径向扩压器与同一离心压气机叶轮相互匹配的试验研究

介绍了某型离心压气机叶轮与五种径向扩压器匹配的试验研究。通过试验录取了五种径向扩压器与同一离心叶轮匹配的性能数据,并对试验结果进行了初步分析和对比．评定了各方案试验性能的优劣;还讨论了叶片式径向扩压器造型参数的变化和叶片前后缘圆心位置的不同处理对离心压气机性能的影响。     

凹型面埋入式涡流发生器控制分离流

本文介绍了一种新型的凹型面埋入式涡流发生器的工作机理。并介绍在一个小宽高比二元单边凹壁亚声扩压壁前段出现气流分离,角落区域有倒流的情况下,采用适当几何参数的该型式涡流发生器大大减小分离区的范围,从而提高了扩压器静压恢复系数和减小总压损失系数的试验结果。     

离心压气机内不同非定常源影响实验研究

使用热线风速仪对扩压器内的非定常流场进行了测量,采用锁相采样—集平均技术对热膜测量的瞬时信号进行了处理,对离心压气机内扩压器势反冲效应和叶轮尾流的非定常影响进行了分离,采用＂逆频谱分析＂方法求解了不确定性非定常性,研究了离心压气机内不同非定常源的影响。结果表明,扩压器的势反冲效应同叶轮叶片的非定常影响处于同一数量级,扩压器的势反冲效应略小一些。扩压器的势反冲效应同叶轮叶片的非定常影响均是沿流向不断减小,且二者之间的差距沿流向也不断减小。叶轮叶片的非定常影响对扩压器叶片的位置较为敏感,靠近扩压器凸面侧的测点受叶轮叶片的非定常影响较大。径向间隙内不确定非定常度受扩压器叶片的反冲影响较大。     

Turbulence modelling of the aerodynamic interaction of OGV wakes and diffuser flow

Different turbulence closures were used to predict the flow interaction between the wakes created by compressor outlet guide vanes（OGVs） and a downstream annular pre-diffuser.Two statistical turbulence...     

喷管扩张段绝热层的烧蚀计算

固体火箭发动机喷管的烧蚀预示是喷管结构分析的重要一环，本文用有限元法计算了喷管扩张段绝热层的烧蚀，计算中了对流换热１、材料热解及烧蚀吸热。计算结果与发动机热试车解决结果相近。     

均匀流吹吸式通风实验研究

介绍了吹吸式通风气流的特点,并对吹吸风口间距3.5～3.8m时的低速流场的吹吸式通风气流流场的规律特性进行了实验研究。结果表明,当吹吸风口间距小于3.8m时,低速流场吹吸式通风的气流在射流起始段未结束时就进入了汇流段(吹吸气流流场中未出现射流主体段)。高速流场吹吸式通风的轴心速度经验公式与低速流场的吹吸式通风实验结果式对比分析,发现两者之间存在较大的偏差。高速流场吹吸式通风的轴心速度经验公式不适用于描述低速流场吹吸式通风轴心速度的规律特性。     

Numerical investigation of flow mechanisms of tandem impeller inside a centrifugal compressor

This study numerically investigated a single stage centrifugal compressor ‘‘Radiver’’ with a wedge diffuser and several tandem-designed impellers to explore the flow phenomena within the tandem impeller and the potential to enhance compressor performance. The results demonstrate that tandem design and clocking fraction (λ_s) significantly affects the compressor performance. The compressor stage with tandem impellers of Series A of boundary layer growth interruption alone are observed to have a widely operating range but efficiency and total pressure ratio penalty compared with that of conventional impeller. The tandem impeller with at least the same impeller efficiency as the conventional design is considered as a critical design criteria so that further modification process based on the flow characteristic of tandem impeller is necessary. In order to restrain the inducer wake and exducer shock losses, parameters modification of blade angle and thickness distributions are necessary and the modified tandem impeller of Series B is obtained. The modified tandem impeller with 25% clocking arrangement shows an 8.45% stall margin increase and maintains the total pressure ratio and efficiency as the conventional design, which proves the potential of tandem impeller to improve compressor stage performance. It is noteworthy that the tandem impellers of Radiver have not shown obviously balanced exit flow field and the fundamental mechanism of stall margin extending of tandem impeller lies on the improved impeller/diffuser matching performance resulting from the incidence angle variation at diffuser inlet.     

叶片扩压器倒角对压气机性能影响的数值研究

研究了单级离心压气机中径向叶片扩压器倒角对其气动性能的影响.在倒角较小时,压气机单级性能改变不大,随着倒角的增大,堵点流量降低,效率和压比下降.在此基础上,开展了优化径向叶片扩压器倒角从而提升离心压气机气动性能的研究.结果表明:在径向扩压器吸力面采用无倒角或小倒角结构,防止流量堵塞,而在压力面采用沿弦向变半径倒角结构,抑制和消除压力面存在的分离,这种结构可明显提升所研究的离心压气机的气动性能.另外,进一步研究了在轮毂和机匣处分别采用如上倒角结构对气动性能的影响,发现轮毂处变倒角对性能优化起了主要作用.