Analytical method of nonlinear coupled constitutive relations for rarefied non-equilibrium flows

It is well known that Navier-Stokes equations are not valid for those high-Knudsen and high-Mach flows, in which the local thermodynamically non-equilibrium effects are dominant. To extend the non-equilibrium describing the ability of macroscopic equations, Nonlinear Coupled Constitutive Relation (NCCR) model was developed from Eu’s generalized hydrodynamic equations to substitute linear Newton’s law of viscosity and Fourier’s law of heat conduction in conservation laws. In the NCCR model, how to solve the decomposed constitutive equations with reasonable computational cost is a key ingredient of this scheme. In this paper, an analytic method is proposed firstly. Compared to the iterative procedure in the conventional NCCR model, the analytic method not only obtains exact roots of the decomposed constitutive polynomials, but also preserves the nonlinear constitutive relations in the original framework of NCCR methods. Numerical tests to assess the efficiency and accuracy of the proposed method are conducted for argon shock structures, Couette flows, two-dimensional hypersonic flows over a cylinder and three-dimensional supersonic flows over a three-dimensional sphere. These superior advantages of the current method are expected to render itself a powerful tool for simulating the hypersonic rarefied flows and microscale flows of high Knudsen number for engineering applications.     

用CT值推导人体组织属性参数的方法及改进

蒙特卡罗方法是计算精度最高的人体组织剂量计算方法。常见的蒙特卡罗模拟程序,如M CNP,EG S4等都自带了各种介质的截面数据,而剂量计算的一个重要步骤就是得到人体组织的属性参数——质量密度和化学组成。本文主要介绍了两种根据医学影像CT值推导人体组织属性参数的方法——区间法和两分法,并经过分析比较认为两分法比区间法具有更高的精确度和可行性。同时,针对两分法存在的不足和缺陷,本文将CT值全范围划分为七段,根据两分法的假设条件假设每一段均由两种不同的人体组织混合而成。在每一段CT值范围内,人体组织的质量密度和化学组成通过对两种假定物质参数的拟合得到。结果说明该方法所得到的人体组织属性参数完全可以满足蒙特卡罗人体组织剂量计算的要求。     

滑移流区内不同Kn数对流动及传热影响的数值分析

针对微尺度二维通道气体滑移流区的流动阻力和传热特性,采用滑移模型和SIMPLER数值进行了模拟分析.研究了定热流情况下不同Kn数时通道内压力、速度和温度场的分布以及流动阻力和换热的特性.数值分析结果表明随着Kn数的增大,速度滑移和温度跳跃的程度都增加,并且影响着流动阻力的下降,但两者对于换热系数的影响趋势是相反的:速度滑移有利于提高换热系数,而温度跳跃则降低换热系数,但总体上增加了微通道中的热阻.     

一种空投型高速模型总体设计方法研究

系统梳理了空投型高速模型设计与飞行试验的难点问题。以国外典型气动布局飞机为研究对象,在确定相似设计准则的基础上,通过分析涡轮发动机对总体设计参数及飞行性能的影响,提出了一种采用飞机挂飞投放+内埋小型助推火箭的高速模型飞行试验方法。建立了固体火箭发动机几何、重量、性能的参数化模型,初步权衡模型飞机分离点高度、速度影响,提出了飞机与发动机一体化总体参数计算方法与流程,通过动力学仿真验证了设计案例的准确性。以上研究成果可为高速模型总体设计提供借鉴。     

低雷诺数下小型无人机翼型气动特性分析

以小型无人机翼型研究为背景,利用基于线性稳定性理论的eN方法对对小型无人机常用的翼型CLARKY在雷诺数Re=1.0×10~5、5×10~5、1.0×10~6,迎角由-5°~20°时的气动性能进行了计算和对比分析。随着雷诺数的增大,翼型上表面的转捩位置不断向前缘移动,气流分离则由完全分离逐渐转变为层流分离泡结构,使得翼型的最大升力系数和临界迎角增大,阻力减小,最大升阻比显著增大,有利迎角逐渐减小,翼型CLARKY的气动特性逐渐得到改善。     

一种锯齿状唇口超声速轴对称进气道特性

为探究锯齿状唇口对进气道气动特性的影响,完成了一种常规唇口轴对称进气道设计后,在保持其他基本构型参数和几何特征不变的基础上,通过对其唇口进行剪切构造出锯齿状切口,得到了一种锯齿状唇口超声速轴对称进气道,采用标准k-ε湍流模型对比分析了该进气道与原始型面进气道的气动特性.结果表明:锯齿状唇口进气道通过唇口溢流牺牲流量系数...     

Investigation of flow unsteadiness in a highly-loaded compressor cascade using a dynamic mode decomposition method

Unsteady flow in the hub endwall region has long been a hot topic in the turbomachinery community. However important it is to the performance of the whole engine, the coherent unsteady flow phenomena are still not well understood. In this paper, the complex flow field in the hub endwall of a cantilevered compressor cascade has been investigated through numerical approach. The predicted results were validated by experimental data. To highlight the dominant flow structures among irregular and chao...     

旋转带肋直通道湍流流动TR-PIV实验

采用高频粒子图像测速系统(TR-PIV)测量了旋转带肋通道内的主流平均速度、雷诺切应力、再附点等参数,并研究其沿程变化规律,通道高宽比为1,肋的阻塞比为0.1,雷诺数为10000,旋转数从0变化到0.52,实验结果表明:静止时流动呈对称分布,但旋转后产生的哥氏力会极大地影响通道内的湍流流动,随着转速的增加,主流速度型偏...     

Similarity phenomena of lean swirling flames at different bulk velocities with acoustic disturbances

In this study, flame responses to acoustic disturbances with different frequencies and amplitudes were experimentally investigated in a lean premixed swirl-stabilized combustor operating at different bulk velocities. The total heat release rate fluctuations and spatial CH* chemiluminescence distributions were captured using a photomultiplier tube and high-speed camera, respectively. The results indicate that the heat release rate exhibits a relatively drastic oscillation and high-order harmonics for low-frequency disturbances. When the bulk velocity and forcing frequency were doubled simultaneously, similar flame structures were observed in the CH* chemiluminescence distributions. As the bulk velocity increases, the gain of the Flame Describing Function (FDF) extends toward the higher frequencies, and the delay time of the flame response decreases. The similarity among FDFs at different bulk velocities was effectively captured by introducing a non-dimensional parameter, defined as the ratio of the flame response delay to the forcing time scale, to replace the dimensional forcing frequency. Furthermore, the availability of the newly defined non-dimensional parameter was verified for flames with different swirl numbers, as this played an important role in determining the flame structures and associated unsteady heat release rate.     

Predicting near-wall turbulence with minimal flow units in compressible turbulent channel flows

Mach number effects on the near-wall turbulence in the absence of outer motions remain unclear so far. The present study extends the Minimal Flow Units (MFUs), a widely applied method to investigate near-wall turbulence free from the impact of large-scale motions in the outer region in incompressible channel flows, to compressible wall-bounded turbulence. The compressible near-wall turbulence in MFU proves accurate in replicating near-wall statistics, independent of Mach number and statistically equivalent to the universal signals extracted from the full-sized channel. It is further utilized as universal signals in the predictive models of compressible near-wall turbulence, which is capable of accurately predicting variances and joint probability density functions of velocity and temperature fluctuations.