Computer modelling of a penetrator thermal sensor

The Philae lander is part of the Rosetta mission to investigate comet 67P/Churyumov-Gerasimenko. It will use a harpoon like device to anchor itself onto the surface. The anchor will perhaps reach depths of 1–2 m. In the anchor is a temperature sensor that will measure the boundary temperature as part of the MUPUS experiment. As the anchor attains thermal equilibrium with the comet ice it may be possible to extract the thermal properties of the surrounding ice, such as the thermal diffusivity, by using the temperature sensor data. The anchor is not an optimal shape for a thermal probe and application of analytical solutions to the heat equation is inappropriate. We prepare a numerical model to fit temperature sensor data and extract the thermal diffusivity. Penetrator probes mechanically compact the material immediately surrounding them as they enter the target. If the thermal properties, composition and dimensions of the penetrator are known, then the thermal properties of this pristine material may be recovered although this will be a challenging measurement. We report on investigations, using a numerical thermal model, to simulate a variety of scenarios that the anchor may encounter and how they will affect the measurement.     

Research on failure criterion of composite based on unified macro- and micro-mechanical model

A new unified macro- and micro-mechanics failure analysis method for composite structures was developed in order to take the effects of composite micro structure into consideration. In this method, the macro stress distribution of composite structure was calculated by commercial finite element analysis software. According to the macro stress distribution, the damage point was searched and the micro-stress distribution was calculated by reformulated finite-volume direct averaging micromechanics (FVDAM), which was a multi-scale finite element method for composite. The micro structure failure modes were estimated with the failure strength of constituents. A unidirectional composite plate with a circular hole in the center under two kinds of loads was analyzed with the traditional macro-mechanical failure analysis method and the unified macro- and micro-mechanics failure analysis method. The results obtained by the two methods are consistent, which show this new method’s accuracy and efficiency.     

统一显示器系统的技术分析及其替代产品的研制

统一显示系统采用图形叠加技术完成综合信息的显示。在一幅图象中,分时显示以快速、灵活的笔划绘制的图形与准确和以适时的光栅形成的图形。一幅光栅图形中的逐行扫描与隔行扫描分时完成并使不同信息获得清晰稳定的显示效果。选择合理的设计方法来实现在LRU内部两种产品模块的原位替代。     

正弦波模型化测量方法及应用

本文对应用较多的几种正弦波模型化测量方法进行了综述，它们是曲线拟合法、直方图统计分析法、FFT法和拍频法。较详细地介绍了这几种测量方法的典型用途以及特点，通过比较几种方法的优缺点，讨论了它们应用中的局限性。     

Boundary discontinuous Fourier analysis of thick beams with clamped and simply supported edges via CUF

This paper presents an analytical solution for static analysis of thick rectangular beams with different boundary conditions.Carrera's Unified Formulation (CUF) is used in order to consider shear deformation theories of arbitrary order.The novelty of the present work is that a boundary discontinuous Fourier approach is used to consider clamped boundary conditions in the analytical solution,unlike Navier-type solutions which are restricted to simply supported beams.Governing equations are obtained by employing the principle of virtual work.The numerical accuracy of results is ascertained by studying the convergence of the solution and comparing the results to those of a 3D finite element solution.Beams subjected to bending due to a uniform pressure load and subjected to torsion due to opposite linear forces are considered.Overall,accurate results close to those of 3D finite element solutions are obtained,which can be used to validate finite element results or other approximate methods.     

用于卫星姿态机动控制的一种自适应模糊控制器

卫星的姿态机动控制要求机动快速和较强鲁棒性.纯模糊控制器响应快、鲁棒性好,能够方便地应用人的智能,但是模糊规则库的构建需要预先获取足够的语言信息.从Lyapunov函数出发设计了一个稳定的直接型自适应模糊姿态机动控制系统,控制器能够在初始语言信息很少的条件下通过自适应律调整语言信息参数而得到合适的模糊规则,使控制器具有更强的适应能力.数学仿真比较了在完全没有语言信息和有一条语言信息的情况下控制系统的表现,表明仅有一条语言信息时控制系统性能就能够显示得十分出色.最后,仿真结果证实了自适应模糊控制器良好的鲁棒性.      

空间太阳能电站统一调度设计及电能管理分析

针对多旋转关节空间太阳能电站(Space Solar Power Station, SSPS),提出一种环形拓扑的电力系统架构。基于功率分层准则对SSPS电力拓扑架构进行设计,提出U1~U7共7个层级、母线电压5000V、功率等级为MW的太阳能电站电力系统。针对分层架构中多太阳电池阵子阵并联(U6层),提出分层功率平衡统一控制策略,对MPPT控制、MPPT控制+稳定直流母线电压混合控制、MPPT算法+下垂稳定直流母线电压混合控制三种控制方法开展仿真分析。结果表明,提出的基于虚拟阻抗的下垂控制策略可以有效调节、分配功率,解决了空间发电站母线电压无法稳定的问题。     

多目标扩频角度跟踪系统及精度分析

扩频角度跟踪系统是实现扩频测控的前提,研究无数据包络情况下的直接扩频角度跟踪系统,在系统建模的基础上进行了数学建模、精度分析和数学仿真。结果表明:扩频角跟踪精度可达到单脉冲信标跟踪的精度;精度不仅受接收机输入端噪声的影响,还受数据自噪声的影响;高信噪比情况下,角误差通道的相移限制跟踪精度,但合理设置参数仍可实现多目标、高精度的扩频角度跟踪。     

Inverse design of mission success space for combat aircraft contribution evaluation

This paper presents a novel design method of the Mission Success Space (MSS) for the evaluation on aircraft contribution effectiveness. MSS concept was proposed for giving success criterion of a mission and judging the success by conventional mission effectiveness with regards to the aircraft capabilities. This space is created by the Mission Success Function (MSF) and the original Effectiveness Index Space (EIS) where empirical equations are usually assumed to be MSFs. Based on this MSS concept, this paper firstly defines the MSS-based evaluation, then further summarizes the evaluation process of the Contribution to System-of-Systems (CSS). More importantly, based on the thought of Inverse Design (ID), a new design method of MSF is presented comprehensively analyzing aircraft’s CSS in a combat mission without using any empirical MSF. The definition of MSS based ID is given and the design procedure is sequentially introduced. Two different confrontation cases are depicted with many details as the simulation validation: Air-to-ground and Penetration. There are two design variables considered for designing MSS in the latter case while only one for the former. However, in both cases, the best design is given by evaluating the Gaussian fitting performance of CSS.     

中心遥控作业的设计研究

从实际应用经验出发，介绍了遥控作业的编写原则和方法，以规范作业设计过程，约定设计规则，引导编码风格，从而保证遥控作业的正确，可靠，高效，易维护。