Six sigma robust design optimization for thermal protection system of hypersonic vehicles based on successive response surface method

Lightweight design is important for the Thermal Protection System(TPS) of hypersonic vehicles in that it protects the inner structure from severe heating environment. However, due to the existence of uncertainties in material properties and geometry, it is imperative to incorporate uncertainty analysis into the design optimization to obtain reliable results. In this paper, a six sigma robust design optimization based on Successive Response Surface Method(SRSM) is established for the TPS to improve the reliability and robustness with considering the uncertainties. The uncertain parameters related to material properties and thicknesses of insulation layers are considered and characterized by random variables following normal distributions. By employing SRSM, the values of objective function and constraints are approximated by the response surfaces to reduce computational cost. The optimization is an iterative process with response surfaces updating to find the true optimal solution. The optimization of the nose cone of hypersonic vehicle cabin is provided as an example to illustrate the feasibility and effectiveness of the proposed method.     

基于神经网络的民航安检系统风险评价研究

随着民航事业的快速发展,民航安全问题引起了广泛的关注.民航安全检查是民航管理安全重要的组成部分,如何建立一个合理的风险评价模型,指导民航安全检查的管理工作,已成为民航管理者的迫切需求.将BP神经网络模型引入民航安全管理,在分析民航安检系统的基础上,建立了安检系统的风险评价模型.通过实际应用验证了该模型的可行性.     

三坐标测量涡轮导向叶片排气面积的方法研究

涡轮导向叶片排气面积是叶片设计和加工中的重要参数,能够显著影响整机性能。为了精确测量涡轮导向叶片排气面积,对三坐标测量机测量叶片排气面积的方法进行研究。在三坐标上测量涡轮叶片排气面积,分别采用触测法和扫描型线法两种测量方法,并对测量结果进行对比分析。通过对涡轮导向叶片排气面积的实际测量,总结了三坐标测量机测量涡轮导向叶片排气面积的测量方法、测量步骤、数据处理方式以及测量不确定度分析。     

定容燃烧弹实验系统及C7燃料火焰速度测量

设计并搭建了适用于测量高温、高压条件下层流火焰传播速度的定容燃烧弹实验系统。详细介绍了定容燃烧弹实验系统的主要子系统的构成和功能,并阐述实验数据处理方法。测量初始温度为400K、压力为0.1MPa和0.3MPa,C7燃料(甲苯、甲基环己烷、正庚烷)/空气层流火焰传播速度,并与现有文献结果进行了对比。结果表明:该定容燃烧弹实验系统具有较高的可靠性,不仅能够准确测量较高初始温度、不同初始压力条件下燃料/空气的层流火焰传播速度,而且能够拓宽测量火焰传播速度当量比的范围。      

三维非平面裂纹扩展参数化模拟方法

发展一种基于有限元方法（FEM）的自动模拟三维非平面裂纹扩展的模拟方法。该方法采用参数化建模的方式建立裂纹体,以镶嵌裂纹体的方式在结构中插入裂纹,然后通过有限元计算得到裂纹扩展参量,自动更新裂纹体从而模拟裂纹的扩展过程。通过模拟三个裂纹扩展算例,计算了裂纹扩展循环数,对比试验结果,误差分别为195%、161%、21%。结果表明:该方法能够模拟三维非平面裂纹的扩展并计算扩展寿命,具有一定的精度和适用性。      

Estimation of ballistic coefficients of low altitude debris objects from historical two line elements

This paper presents a new method for estimating ballistic coefficients (BCs) of low perigee debris objects from their historical two line elements (TLEs). The method uses the drag perturbation equation of the semi-major axis of the orbit. For an object with perigee altitude below 700 km, the variation in the mean semi-major axis derived from the TLE is mainly caused by the atmospheric drag effect, and therefore is used as the source in the estimation of the ballistic coefficient. The method is tested using the GRACE satellites, and a number of debris objects with external ballistic coefficient values, and agreements of about 10% are achieved.     

Estimation of GPS instrumental biases from small scale network

With 4 GPS receivers located in the equatorial anomaly region in southeast China, this paper proposes a grid-based algorithm to determine the GPS satellites and receivers biases, and at the same time to derive the total electron content (TEC) with time resolution of 15 min and spatial resolution of 1° by 3.5° in latitude and longitude. By assuming that the TEC is identical at any point within a given grid block and the biases do not vary within a day, the algorithm arranges unknown biases and TECs with slant path TEC from the 4 receivers’ observations into a set of equations. Then the instrumental biases and the TECs are determined by using the least squares fitting technique. The performance of the method is examined by applying it to the GPS receiver chain observations selected from 16 geomagnetically quiet days in four seasons of 2006. It is found that the fitting agrees with the data very well, with goodness of fit ranging from 0.452 TECU to 1.914 TECU. Having a mean of 0.9 ns, the standard deviations for most of the GPS satellite biases are less than 1.0 ns for the 16 days. The GPS receiver biases are more stable than that of the GPS satellites. The standard deviation in the 4 receiver bias is from 0.370 ns to 0.855 ns, with a mean of 0.5 ns. Moreover, the instrumental biases are highly correlated with those derived from CODE and JPL with independent methods. The typical precision of the derived TEC is 5 TECU by a conservative estimation. These results indicate that the proposed algorithm is valid and qualified for small scale GPS network.     

半球谐振子疲劳寿命分析与仿真

半球谐振子的寿命和损伤是直接影响高精度半球谐振陀螺使用时长和安全性的重要因素。目前国内加工的半球谐振子所用的熔融石英玻璃材料主要依靠进口,采用传统的疲劳寿命实验确定方法成本过于昂贵,因此需要利用疲劳分析软件对半球谐振子的疲劳寿命进行分析。文章通过半球谐振陀螺应力分析,采用ANSYS软件对熔融石英半球谐振子进行应力分析仿真,确定因残余应力所引起的疲劳危险部位,并在疲劳部位进行裂纹扩展分析,得到 、 和 型应力强度因子,以使在半球谐振子结构设计和使用过程中对易疲劳的部位进行有效监控和预防。     

地下结构模型试验的光学激波管

光学激波管是进行抗爆结构试验研究的一种新型动载设备,它除具有常规激波管的通过电测手段测试试验结构物上一点或多点的应力、应变、速度等力学参数外,其突出的特点是通过光测手段能够拍摄试验结构物在冲击波动压作用下连续变化的过程和被破坏形态的清晰物理图像,进行地下结构的抗爆研究。本文较详细地介绍了用于地下结构抗爆试验研究用的光学激波管设备的构造和测试手段以及设备调试和应用试验的情况,最后还公布了用该设备拍摄到的激波进入通道后波后新物理现象的彩色波动照片及用该设备做的部分试验研究成果。     

氢致Ⅰ型裂纹扩展的位错塞积群模型

本文利用位错理论和夹杂理论研究了Ⅰ型裂纹前方的位错塞积群和氢气团以及它们之间的交互作用，求得了塞积群的位借密度、应力集中系数和裂纹扩展速率。所得结果表明，氢气团促进裂纹尖端位猪源开动，即促进滞后塑性变形，提高塞积群的应力集中系数，引起材料脆化，促进微裂纹核形成。