基于压缩感知的嵌套FDA 雷达距离- 角度联合估计

针对频率分集技术，与非均匀阵列、压缩感知理论相结合，实现目标距离- 角度的联合估计。通过 频率分集技术提高信号空间自由度，将距离参数引入导向矢量矩阵，实现距离- 角度参数的联合。并结合嵌套 阵列，显著提高雷达阵列孔径。该方法针对嵌套阵虚拟阵列流型矩阵的优化过程导致的秩亏缺问题，传统的空 间平滑算法会以牺牲部分阵列孔径为代价将单快拍问题转化为多快拍问题，采用正交匹配追踪算法可以实现单 快拍下的高精度参数估计，避免了空间平滑技术对阵列孔径的影响。并通过压缩感知理论的应用降低信号维度， 减小了计算复杂度。     

Optimal crater landmark selection based on optical navigation performance factors for planetary landing

Planetary craters are natural navigation landmarks that widely exist and are easily observed. Optical navigation based on crater landmarks has become an important autonomous navigation method for planetary landing. Due to the increase in observed crater landmarks and the limitation of onboard computation, the selection of good crater landmarks has gradually become a research hotspot in the field of landmark-based optical navigation. This paper designs a fast crater landmark selection method, which not only considers the configuration observability of crater subsets but also focuses on the influence on navigation performance arising from the measurement uncertainty and the matching confidence of craters, which is different from other landmark selection methods. The factor of measurement uncertainty, which is anisotropic, correlated and nonidentically distributed, is quantified and integrated into selection based on crater pairing detection and localization error evaluation. In addition, the concept of the crater matching confidence factor is introduced, which reflects the possibility of 2D projection measurements corresponding to 3D positions. Combined with the configuration observability factor, the crater landmark selection indicator is formed. Finally, the effectiveness of the proposed method is verified by Monte Carlo simulations.     

融合明度特征的V-SAD立体匹配算法

针对SAD算法难以对图像中纯色与弱纹理部分进行准确匹配的问题,提出了将HSV空间明度特征与SAD算法相融合的立体匹配算法,称为V-SAD算法.首先将图像从RGB空间转化至HSV空间,并根据H、S、V值将像素点按照颜色分为10类,同时得到明度特征图.然后结合SAD算法需要的灰度特征图计算匹配代价,得到初步的视差图.接着,根据HSV空间的颜色信息对图像进行分割,结合数学形态法求解分割区块中的独立连通域.再利用边缘生长法对每一个连通域的视差进行恢复.最后,使用左右一致性检测方法对视差图进行优化.实验结果表明,利用图像的明度信息衡量纯色与弱纹理区域的匹配点的相似度是有效的,该V-SAD算法有效改善了SAD算法在弱纹理和纯色区域的匹配效果,平均误匹配率下降了13.02％.     

Target localization based on cross-view matching between UAV and satellite

Matching remote sensing images taken by an unmanned aerial vehicle (UAV) with satellite remote sensing images with geolocation information. Thus, the specific geographic location of the target object captured by the UAV is determined. Its main challenge is the considerable differences in the visual content of remote sensing images acquired by satellites and UAVs, such as dramatic changes in viewpoint, unknown orientations, etc. Much of the previous work has focused on image matching of homologous data. To overcome the difficulties caused by the difference between these two data modes and maintain robustness in visual positioning, a quality-aware template matching method based on scale-adaptive deep convolutional features is proposed by deeply mining their common features. The template size feature map and the reference image feature map are first obtained. The two feature maps obtained are used to measure the similarity. Finally, a heat map representing the probability of matching is generated to determine the best match in the reference image. The method is applied to the latest UAV-based geolocation dataset (University-1652 dataset) and the real-scene campus data we collected with UAVs. The experimental results demonstrate the effectiveness and superiority of the method.     

地图辅助行人航迹推算技术的室内定位方法

针对目前室内定位技术中位置漂移、定位结果偏差较大的问题,提出了一种融合行人航迹推算(PDR)、地标匹配修正和地图辅助的室内行人定位方法.该方法利用基于惯性传感器的PDR技术计算行人位置信息,利用行走过程中的传感器读数特征识别室内特定地标点,与地标库数据进行匹配后,修正PDR轨迹产生的累积误差.室内地图辅助主要是通过判断行人是否位于走廊等区域,限制轨迹穿墙,约束PDR定位轨迹.实验结果表明,融合定位算法得到的轨迹优于纯惯性递推算法得到的轨迹,更加接近真实的行走轨迹,定位精度提高了51.2％,平均定位误差降至1.8m,满足室内定位需求.     

基于注意力机制和特征匹配的空对地多目标检测与跟踪算法

多目标跟踪算法是实现无人机自主导航的关键技术，为解决现有方法存在的小目标检测能力弱、计算能耗大、鲁棒性差等问题，提出一种基于注意力机制和特征匹配的多目标空对地跟踪算法，以实现航拍视角下对目标的精准高效跟踪。首先，引入通道可分离卷积，实现目标检测模型的轻量化；其次，构造融合空间注意力机制的小目标检测分支，提高对小微目标的检测精度，最后，优化目标跟踪算法的外观重识别网络，提高多目标跟踪效率。使用Visdrone2019-MOT数据集对所提算法进行验证，实验结果表明，所提算法的MOTA值提高了0.６%，FPS值为21.31帧/s，在模型大小和跟踪精度上实现了较好的平衡。     

一种基于Sobel算子的星敏感器星图预处理方法

星敏感器在太空环境下工作时容易受到杂散光的干扰,对星图进行二值化后直接采用质心法难以从星图中提取恒星星像坐标.针对上述问题,提出了一种基于Sobel算子的星敏感器星图预处理方法,用于提取星像坐标.首先采用Sobel算子计算星图中所有像素的梯度,保留所有大于阈值的像素梯度作为新的星图,然后以新的星图作为样板通过质心法从原始星图中提取恒星星像.由于杂散光干扰信号在星图中表现为缓慢信号,这些信号计算的梯度很小,因此通过Sobel算子计算后新的星图只有恒星星像.该方法能够消除星图中的杂散光干扰信号,使星图中只保留恒星星像信息,提高恒星星像坐标提取精度,具有较好的鲁棒性.     

基于EMD-TFPF的仿生偏振光罗盘去噪方法

为了提高仿生偏振光罗盘定向精度,降低罗盘在进行航向角测量时存在的高斯白噪声,基于经验模态分解(EMD)和时频峰值滤波(TFPF),设计了一种用于仿生偏振光罗盘的EMD-TFPF联合去噪方法.在去噪过程中,首先将含噪声的航向角信号分解为不同的模态,对不同模态采用不同窗长进行时频峰值滤波,进而改善了单一窗长去噪对有用信号造成的衰减,有效提高了去噪算法的自适应能力.经过机载实验验证,采用该方法去噪后的仿生偏振光罗盘可以实现定向精度0.3259°,比原始信号精度提升了18.4％.     

共沉淀法制备花状NiCo2O4及其吸波性能的研究

通过共沉淀法制备花状NiCo₂O₄吸波材料，利用XRD、FTIR、BET、XPS和SEM等方式表征了样品成分及形貌特征，将不同煅烧温度（300、400、500、600、700 ℃）的产物利用矢量网络分析仪通过同轴测试法模拟了不同厚度下的吸波性能。结果表明：400 ℃煅烧样品在反射损耗值、吸收带宽以及样品厚度都表现出较好的性能，当厚度为1.5 mm时，在14.32 GHz处吸波材料达到最大的吸收损耗值为-43.71 dB，有效吸收带宽为4.48 GHz （12.08~16.56 GHz），可以预见镍钴基吸波材料具有很大的潜力。