一种IRST双机协同被动探测机动目标定位新方法

针对红外搜索跟踪系统（IRST）双机协同被动探测定位作战使用中，机动目标建模与实际运动失配造成定位误差偏大的问题，研究了一种基于曲线模型的自适应滤波新方法。该方法改进了传统方法根据方向角估计转弯率以及基于帧间插分线加速度估计切向加速度的思路，将转弯率及线加速度联合作为状态变量进行了状态扩维，并推导了扩维后的过程噪声协方差表达式，在缓解传统两层滤波结构带来的计算量大问题外，也提高了切向加速度的估计精度。另外基于反正切函数的值域，结合方向角在四象限间的转移关系，优化了方向角的设计。通过IRST双机协同仿真实例，验证了所提方法对机动目标的适应性更强、目标定位精度更高。     

Satellite availability and positioning performance of uncombined precise point positioning using BeiDou-2 and BeiDou-3 multi-frequency signals

To realize the smooth transition from regional BeiDou Navigation Satellite System (BDS-2) to the global one (BDS-3), the integration of BDS-2 and BDS-3 is important for providing continuous, stable and reliable positioning, navigation and timing (PNT) services for global users. This work used 154 globally distributed multi-GNSS (Global Navigation Satellite System) experiment stations spanning 30 days to analyze the satellite availability and positioning performance of uncombined precise point positioning (UC-PPP) under current BDS-2 and BDS-3 constellations. We focused on three issues: the influence of BDS-3 receiver tracking abilities, the positioning performance among different areas, and the benefit of multi-frequency observations. The results show that the elliptical zone caused by poor BDS-2 satellite visibility is disappeared when the evenly distributed BDS-3 medium earth orbit satellites are introduced. When BDS-3 are integrated with BDS-2, the area with the Position Dilution of Precision (PDOP) less than 2 can be expanded to 75° S-75° N and 30° E-150° W. The positioning performance of BDS-3 and BDS-2/BDS-3 UC-PPP are seriously affected by the receiver tracking abilities of BDS-3 signals. When the maximum pseudo-random noise sequences (PRNs) of BDS-3 satellites tracked by stations are within 30 or 37, the positioning accuracy of static UC-PPP can be improved by 22.94% or 8.27% due to the integration of BDS-2 and BDS-3. Besides, the most improvement of BDS-2 and BDS-3 integration is achieved in Asia-Pacific regions, especially for the kinematic UC-PPP or the poor receiver tracking abilities of BDS-3. Similar to the multi-frequency BDS-2 UC-PPP, the benefit of multi-frequency signals for BDS-3 or BDS-2/BDS-3 UC-PPP is also non-vital. The three-dimensional positioning accuracy of BDS-2/BDS-3 multi-frequency UC-PPP in static mode and kinematic mode are 2.24 cm and 5.39 cm, while the corresponding convergence time are 49.62 min and 73.80 min, respectively. Compared with BDS-2, both the positioning accuracy and the convergence time of BDS-2/BDS-3 joint UC-PPP are improved by approximately over 50%, which indicates that BDS-3 has a great potential to provide high-quality PNT services as other global navigation satellite systems.     

一种面向电力终端的北斗定位模块研究

基于电力系统对卫星导航定位的自主安全性要求，研究用于电力终端的北斗定位技术，设计了一款用于电力行业终端的北斗定位导航模块，主要包括模块的模拟前端设计、数字信号处理及分析，重点对低功耗小型化设计、提高接收灵敏度设计等进行研究，并对所设计的北斗模块实物进行了实际测试和分析，成果已开始在电力行业试点应用。     

波音757客改货新机组登机门的加装调节

介绍了新机组登机门的概况,以及加装调节过程中的难点和创新点,总结改装经验,为类似改装提供解决问题的方法和思路。     

Contribution analysis of QZSS to single-frequency PPP of GPS/BDS/GLONASS/Galileo

The Quasi-Zenith Satellite System (QZSS) established by the Japan Aerospace Exploration Agency mainly serves the Asia-Pacific region and its surrounding areas. Currently, four in-orbit satellites provide services. Most users of GNSS in the mass market use single-frequency (SF) receivers owing to the low cost. Therefore, it is meaningful to analyze and evaluate the contribution of the QZSS to SF precise point positioning (PPP) of GPS/BDS/GLONASS/Galileo systems with the emergence of GNSS and QZSS. This study compares the performances of three SF PPP models, namely the GRoup and PHase Ionospheric Correction (GRAPHIC) model, GRAPHIC with code observation model, and an ionosphere-constrained model, and evaluated the contribution of the QZSS to the SF PPP of GPS/BDS/GLONASS/Galileo systems. Moreover, the influence of code bias on the SF PPP of the BDS system is also analyzed. A two-week dataset (DOY 013–026, 2019) from 10 stations of the MGEX network is selected for validation, and the results show that: (1) For cut-off elevation angles of 15, 20, and 25°, the convergence times for the static SF PPP of GLONASS + QZSS are reduced by 4.3, 30.8, and 12.7%, respectively, and the positioning accuracy is similar compared with that of the GLONASS system. Compared with the BDS single system, the convergence times for the static SF PPP of BDS + QZSS under 15 and 25° are reduced by 37.6 and 39.2%, the horizontal positioning accuracies are improved by 18.6 and 14.1%, and the vertical components are improved by 13.9 and 21.4%, respectively. At cut-off elevation angles of 15, 20, and 25°, the positioning accuracy and precision of GPS/BDS/GLONASS/Galileo + QZSS is similar to that of GPS/BDS/GLONASS/Galileo. And the convergence times are reduced by 7.4 and 4.3% at cut-off elevation angles of 20 and 25°, respectively. In imitating dynamic PPP, the QZSS significantly improves the positioning accuracy of BDS and GLONASS. However, QZSS has little effect on the GPS-only, Galileo-only and GPS/BDS/GLONASS/Galileo. (2) The code bias of BDS IGSO and MEO cannot be ignored in SF PPP. In static SF PPP, taking the frequency band of B1I whose multipath combination is the largest among the frequency bands as an example, the vertical component has a systematic bias of approximately 0.4–1.0 m. After correcting the code bias, the positioning error in the vertical component is lower than 0.2 m, and the positioning accuracy in the horizontal component are improved accordingly. (3) The SF PPP model with ionosphere constraints has a better convergence speed, while the positioning accuracy of the three models is nearly equal. Therefore the GRAPHIC model can be used to get good positioning accuracy in the absence of external ionosphere products, but its convergence speed is slower.     

The update of BDS-2 TGD and its impact on positioning

Timing group delay (TGD) is an important parameter that affects the positioning performance of global navigation satellite systems (GNSS). The BeiDou navigation satellite system (BDS) broadcasts TGD corrections from B3I frequency to B1I and B2I frequencies, namely TGD₁ and TGD₂. On July 21, 2017, BDS updated TGD values with a maximum change of more than 4 ns. In this contribution, we explain the motivation for the BDS TGD update, which is due to the systematic bias between narrowly correlated and widely correlated pseudo-ranges in BDS monitoring receivers. To investigate the impact of the updated TGD, BDS signal-in-space range error (SISRE) and user positioning performance regarding single point positioning (SPP) and precise point positioning (PPP) are analyzed. Results show that after the update of TGD, the difference between the new TGD and multi-GNSS experiment (MGEX) differential code bias (DCB) decreases from 1.38 ns to 0.29 ns on TGD₁ and from 0.40 ns to 0.25 ns on TGD₂. With the contribution of more accurate TGD, the systematic bias of BDS radial SISRE no longer exists, and the overall BDS SISRE also reduces from 1.33 m to 0.87 m on B1I/B2I frequency, from 1.05 m to 0.89 m on B1I frequency, from 0.92 m to 0.91 m on B2I frequency, respectively, which proves the similar precision of BDS TGD and MGEX DCB. One week of statistical results from 28 globally distributed MGEX stations shows that the SPP performance improves on non-B3I frequencies after the TGD update, with a maximum improvement of more than 22% for the B1I/B2I or B1I/B3I combination. The new TGD mainly reduces SPP positioning bias in the East component. The updated TGD also slightly improves the PPP convergence performance for the B1I/B3I combination, but mostly contributes to a more accurate estimation of the receiver clock and ambiguities.     

GPS姿态测量中模糊度函数法的适应度函数研究

基于全球卫星定位系统（GPS）双差整周模糊度的统计特性,对模糊度函数法（AFM）中的适应度函数进行了改进。分析了传统余弦适应度函数的不足,论证了适应度函数在AFM算法中的重要性。提出了设计适应度函数应满足的五条标准,在此基础上给出了一类适应度函数公式,并对性能进行测试。结果表明：该适应度函数的性能明显优于传统的余弦函数,有效提高了GPS姿态解算的成功率。     

低轨导航星座增强BDS精密单点定位技术验证CSCD

首先介绍了低轨增强北斗精密单点定位(PPP)的观测模型、参数估计与数据处理策略。然后对低轨导航增强仿真验证系统及误差仿真配置进行了说明,基于验证系统仿真了全球20个监测站的北斗及低轨导航数据,并通过单北斗及低轨增强北斗静态PPP试验,给出了低轨增强北斗的高精度定位测试评估结果。结果表明,加入150颗低轨卫星观测量后,20个测站PPP精度收敛到10cm之内只需约1min;低轨增强北斗实现静态收敛后,定位精度东方向均值为1.5cm,北方向均值为0.3cm,高程方向均值为2.2cm。相较于北斗单独精密定位,20个监测站收敛后组合定位精度从5cm左右提升到3cm左右。加入低轨卫星可大大加快PPP收敛速度,提升定位精度,验证了低轨卫星在增强PPP精度和收敛速度上的优越性,同时仿真验证系统可支持全链路闭环仿真验证。     

基于改进DeepSORT的视觉/激光雷达目标跟踪与定位方法CSCD

通过结合目标跟踪与相对定位,在对多帧检测目标进行关联与分析的同时,可以获取其三维信息。但当目标外观特征变换较大时,传统目标跟踪算法较易发生漏匹配或身份变换,而仅依靠对齐点云的相对定位算法较易出现定位失效的情况。针对以上问题,提出了一种基于改进DeepSORT的目标跟踪与定位方法在原始DeepSORT算法中加入基于位置约束的匹配,解决了因外观改变导致的漏匹配问题;在获取跟踪信息的基础上,设计了基于目标运动模型的相对定位方法,解决了图像中目标较小时相对定位不连续且定位精度较低的问题。试验结果表明,与传统DeepSORT算法相比,多目标跟踪准确度提高了5.9%;与仅依靠对齐点云的相对定位算法相比,定位精度提高了62.4%。