奥克啤酒广告定位剖析

广告效果不好的原因与广告定位的失当有很大关系。作者通过对一个企业的广告定位的剖析，探讨其广告活动的得失及存在问题。     

利用GPS进行角速度确定的研究

提出了一种利用GPS进行载体角速度测量的方法 ,建立了测量数学模型 ,并进行了计算机仿真 ,仿真结果表明 ,该方案可以得到较为满意的结果     

基于多模PPP-AR技术的大气水汽探测性能分析

精密单点定位（precise point positioning，PPP）反演大气可降水量（precipitable water vapor，PWV）具有精度高、实时性强等优点，能够在灾害监测、降雨预报及探测降水信息等方面发挥重要作用。为评估整周模糊度固定模式下PPP-AR（PPP ambiguity resolution）反演PWV的性能，选取全球范围16个MGEX站2022年4个时段的观测数据，采用最终精密星历解算，设置不同星座组合（GPS,BDS-3,GPS+BDS-3,GPS+GLO+GAL+BDS-3）获取对流层延迟（zenith total delay，ZTD）估值，并转换为PWV。从PPP-ZTD与IGS-ZTD的相关性、PPP-ZTD收敛时间、ZTD估值精度和PPP-PWV估值精度4个方面评价多模PPP-AR探测水汽的性能。结果表明，与单（G、C）、双系统（GC）固定解相比，多系统（GREC）固定解获取ZTD估值更加精确，相关系数更高。相较于单、双系统，多系统具有更快的收敛速度，收敛时间分别缩短了27%,25%和20%，多系统固定解与浮点解相比收敛时间缩短11%。此外，对GNSS PPP反演的PWV与探空站PWV（RS-PWV）进行对比，结果表明，WUH2站与HOB2站单、双、多系统固定解、多系统浮点解（float-GREC）的平均均方根误差分别为6.40 mm,6.48 mm,6.19 mm,6.17 mm,6.19 mm和5.82 mm,5.77 mm,5.72 mm,5.62 mm,5.70 mm。多模下得到的PWV估值精度最高，可为高精度的水汽反演提供支持。     

基于工业机器人的机身系统件定位方法研究

针对传统系统件安装工艺采用固定式定位工装导致装配系统开敞性差、柔性程度低的问题,提出了基于工业机器人的机身系统件定位方法,确定了系统件辅助定位工装的标定方法,基于奇异值分解法和位姿等价变换原理确定了工业机器人的位姿调整算法,最后通过系统件辅助定位工装定位试验得出了系统件的定位精度。     

一种适用于曲面结构的机器人制孔误差在线补偿技术

针对工业机器人应用于飞机零部件自动钻孔时各项误差累积造成制孔精度差的问题，提出一种利用单应关系计算机器人驱动坐标三维偏差，以在线补偿机器人制孔精度的方法。首先利用外部测量设备建立机器人制孔系统中各坐标系关系；在标定阶段，通过以一定倾斜角度固联于机器人末端的相机拍摄一幅安装于制孔工作平面上与刀轴正对的平面标定板图像，并据此完成基于单应变换的手-眼关系标定；在实际制孔过程中，机器人在测距传感器及相机的辅助下，从基准孔理论坐标对应的姿态，不断调整至基准孔正上方理想位置，通过手-眼关系计算基准孔实际位置对应的机器人驱动坐标，然后根据一组基准孔的机器人三维驱动误差，计算三维驱动误差变换矩阵，据此获得这组基准孔邻域范围内各待钻孔的机器人驱动坐标补偿量，从而实现待钻孔定位误差补偿。以飞机结构实验件为对象进行了模拟制孔验证，实验结果表明，补偿前待钻孔三维综合定位误差和法向误差测量值范围分别为2.28~2.85 mm和2.09°~3.93°，平均为2.55 mm和3.30°，补偿后制孔最大误差分别不超过0.30 mm和0.21°，满足自动制孔位置精度要求。     

Displacement monitoring performance of relative positioning and Precise Point Positioning (PPP) methods using simulation apparatus

Besides the classical geodetic methods, GPS (Global Positioning System) based positioning methods are widely used for monitoring crustal, structural, ground etc., deformations in recent years. Currently, two main GPS positioning methods are used: Relative and Precise Point Positioning (PPP) methods. It is crucial to know which amount of displacement can be detected with these two methods in order to inform their usability according to the types of deformation. Therefore, this study conducted to investigate horizontal and vertical displacement monitoring performance and capability of determining the direction of displacements of both methods using a developed displacement simulator apparatus. For this purpose, 20 simulated displacement tests were handled. Besides the 24?h data sets, 12?h, 8?h, 4?h and 2?h subsets were considered to examine the influence of short time spans. Each data sets were processed using GAMIT/GLOBK and GIPSY/OASIS scientific software for relative and PPP applications respectively and derived displacements were compared to the simulated (true) displacements. Then statistical significance test was applied. Results of the experiment show that using 24?h data sets, relative method can determine up to 6.0?mm horizontal displacement and 12.3?mm vertical displacement, while PPP method can detect 8.1?mm and 19.2?mm displacements in horizontal and vertical directions respectively. Minimum detected displacements are found to grow larger as time spans are shortened.     

Preliminary analysis of the quality and positioning performance of BDS-3 global interoperable signal B1C&B2a

BeiDou-3 Navigation Satellite System (BDS-3) satellites are equipped with the new generation GNSS signals B1C and B2a, which support the interoperability with GPS and Galileo systems. In this study, the pseudo-range multipath error and carrier phase observation noise of the BDS-3 B1C and B2a signals were evaluated based on zero baseline measurements from the day of year (DOY) 113 to 116, 2020. Further, the precision and performance of the single point positioning (SPP) and precise point positioning (PPP) are assessed at 9 stations. This assessment manifests that the standard deviations (STDs) of the pseudo-range multipath error are about 0.09 ~ 0.22 m, while STDs of the carrier phase observation noise are about 0.075 mm. For the single-frequency SPP, its positioning precision is about 2.03 ~ 4.85 m and 3.29 ~ 10.73 m at the 99.99% confidence level in horizontal and vertical directions, respectively, while the dual-frequency SPP precision is about 1.92 ~ 8.02 m and 4.81 ~ 12.77 m in horizontal and vertical directions, respectively. For the daily static PPP, the convergence time is about 20 ~ 30 min, while the daily positioning precision can reach 1.38 ~ 4.42 cm and -1.31 ~ 4.34 cm in horizontal and vertical directions, respectively. In general, the quality and the SPP and PPP performance of the BDS-3 B1C&B2a signals are comparable to the GPS and Galileo.     

Didactic satellite based on Android platform for space operation demonstration and development

Space technology plays a pivotal role in society development. It offers new methods for telemetry, monitoring and control. However, this sector requires training, research and skills development but the lack of instruments, materials and budgets affects the ambiguity to understand satellite technology. The objective of this paper is to describe a demonstration prototype of a smart phone device for space operations study. Therefore, the first task was carried out to give a demonstration for spatial imagery and attitude determination missions through a wireless communication. The smart phone’s Bluetooth was used to achieve this goal inclusive of a new method to enable real time transmission. In addition, an algorithm around a quaternion based Kalman filter was included in order to detect the reliability of the prototype's orientation. The second task was carried out to provide a demonstration for the attitude control mission using the smart phone’s orientation sensor, including a new method for an autonomous guided mode. As a result, the acquisition platform showed real time measurement with good accuracy for orientation detection and image transmission. In addition, the prototype kept the balance during the demonstration based on the attitude control method.     

四元数UKF超紧密组合导航滤波方法

针对GPS/SINS(Global Positioning System/Strapdown Inertial Navigation Sys-tem)超紧密组合导航系统线性化滤波在高动态、弱GPS信号等环境下性能下降严重的问题,提出了一种以四元数UKF(Unscented Kalman Filter)为基础的GPS/SINS超紧密组合导航系统非线性滤波方法.通过分析GPS与SINS在超紧密组合导航系统中的关系,提出了一种利用SINS信息来估计、修正GPS载波信号的方法,在此基础上建立了组合导航滤波的状态方程和量测方程;以四元数乘性误差模型为基础,提出了一种可应用于UKF滤波的求解四元数加权均值的方法;提出了基于四元数UKF的GPS/SINS超紧密组合导航滤波方法.仿真实验表明:在高动态环境下,四元数UKF滤波方法增强了GPS/SINS超紧密组合导航系统的定位精度和抗干扰能力.     

Phase Residual Estimations for PCVs of Spaceborne GPS Receiver Antenna and Their Impacts on Precise Orbit Determination of GRACE Satellites

In-flight phase center systematic errors of global positioning system(GPS) receiver antenna are the main restriction for improving the precision of precise orbit determination using dual-frequency GPS.Residual approach is one of the valid methods for in-flight calibration of GPS receiver antenna phase center variations(PCVs) from ground calibration.In this paper,followed by the correction model of spaceborne GPS receiver antenna phase center,ionosphere-free PCVs can be directly estimated by ionosphere-free carrier phase post-fit residuals of reduced dynamic orbit determination.By the data processing of gravity recovery and climate experiment(GRACE) satellites,the following conclusions are drawn.Firstly,the distributions of ionosphere-free carrier phase post-fit residuals from different periods have the similar systematic characteristics.Secondly,simulations show that the influence of phase residual estimations for ionosphere-free PCVs on orbit determination can reach the centimeter level.Finally,it is shown by in-flight data processing that phase residual estimations of current period could not only be used for the calibration for GPS receiver antenna phase center of foretime and current period,but also be used for the forecast of ionosphere-free PCVs in future period,and the accuracy of orbit determination can be well improved.