谐振式光纤陀螺单边信号检测方法的研究

热致偏振耦合噪声、背向散射噪声和非线性克尔噪声等因素严重制约了谐振式光纤陀螺的发展，降低噪声的影响对提高谐振式光纤陀螺的精度具有重要的研究意义。本文设计了一种双环腔谐振式光纤陀螺结构，并通过理论分析热致偏振噪声对谐振曲线的影响，提出了一种新的信号检测方法。该检测方法可以判断出谐振曲线受偏振噪声影响小的一边，并利用单边检测方法降低偏振噪声对陀螺精度的影响，双环腔结构也可以有效抑制背向散射噪声。仿真分析表明，在温度变化0.002℃时，检测的归一化幅值误差由0.2261降低到0.0327，单边检测方法可以明显地降低偏振波动噪声带来的影响。     

标准环规测量不确定度分析

介绍标准环规的测量不确定度的分析方法,有助于《标准环规检定规程ＪＪＧ８９４－９５》的实行,同时也有助于测量不确定度的推行。     

某发动机主轴承故障分析

针对某发动机主轴承出现的故障,从五个方面分析原因,最终断定由于漏装一个密封胶圈引起供油效率严重下降是本次故障起因。     

亚声速等膨胀平面射流的初始流场结构

基于大涡模拟方法与5阶精度混合TCD/WENO格式,对等膨胀射流在马赫数为Ma=0.6条件下的初始流场结构进行了数值模拟。数值结果描述了射流等膨胀过程中,射流初始流场的形成、变化及发展过程。并发现了射流初始流场中涡核为射流失稳的起始点,研究了射流混合层与涡核剪切层上涡的产生、发展与破碎以及它们卷吸环境气体并与射流气体混合的整个过程,揭示了射流初始过程中涡核与涡环直径的变化趋势,得到了射流轴向速度与压力的分布。数值结果可为相关发动机的设计提供重要参考。     

垂直下降状态下的旋翼三维流场数值模拟

应用激励盘模型,采用计算流体力学(CFD, Computational Fluid Dynamics)方法结合动量叶素理论,计算了旋翼在垂直下降时的流场特征与气动性能.计算过程中,旋翼载荷被描绘成沿桨盘径向分布、与当地流动参数相关的压力源项.在直角坐标系中,运用有限体积方法直接求解了定常不可压N-S(Navier-Stokes)方程,湍流模型为S-A(Spalart-Allmaras)一方程模型,重点使用诱导速度经验公式计算出了压力源项.旋翼流场模拟结果和性能预计结果同实验测量数据吻合较好,表明这种CFD方法可以有效地分析旋翼下降飞行时的空气流动特性,为进一步的涡环状态研究提供了参考.     

Application of an evolution strategy in planetary ephemeris modeling

Classical planetary ephemeris construction comprises three major steps which are to be performed iteratively: numerical integration of coupled equations of motion of a multi-body system (propagator step), reduction of observations (reduction step), and optimization of model parameters (adjustment step). In future, this approach may become challenged by further refinements in force modeling (e.g. inclusion of much more significant minor bodies than in the past), an ever-growing number of planetary observations (e.g. the vast amount of spacecraft tracking data), and big data issues in general. In order to circumvent the need for both the inversion of normal equation matrices and the determination of partial derivatives, and to prepare the ephemeris for applications apart from stand-alone solar-system planetary orbit calculations, here we propose an alternative ephemeris construction method. The main idea is to solve it as an optimization problem by straightforward direct evaluation of the whole set of mathematical formulas, rather than to solve it as an inverse problem with all its tacit mathematical assumptions and potential numerical difficulties. The usual gradient search is replaced by a stochastic search, namely an evolution strategy, the latter of which is perfect for the exploitation of parallel computing capabilities. Furthermore, this new approach allows for multi-criteria optimization and time-varying optima. These issues will become important in future once ephemeris construction is just one part of even larger optimization problems, e.g. the combined and consistent determination of a generalized physical state (orbit, size, shape, rotation, gravity, $\dots$) of celestial bodies (planets, satellites, asteroids, or comets), and/or if one seeks near real-time solutions. Here, we outline the general idea and exemplarily optimize high-correlated asteroidal ring model parameters (total mass and heliocentric radius), and individual asteroid masses, based on simulated observations.     

带螺纹塑件注射模设计及成型工艺

分析螺纹塑件的结构特点、工艺要求,介绍了基于拼合结构模外卸除螺纹型环的注射模结构以及工作过程,并且对ABS的注射成型工艺进行了分析。     

航空发动机薄壁W形封严环动模外压成形

液压成形是复杂薄壁零件制造的一种有效方法。针对某航空发动机的薄壁高温合金W形封严环构件,提出动模外压成形方法,并建立了有限元模型。基于数值模拟和工艺实验,分析了不同成形阶段的变形规律和压缩失稳的控制机理,在此基础上研究了毛坯成形区高度和型腔液压加载路径等关键工艺参数对零件成形结果的影响,探讨了成形过程中环向失稳起皱、型面不对称、材料堆叠等失效形式,提出了优化的参数。结果表明,提出的工艺方法可实现W形封严环的整体精确成形,采用优化的毛坯成形区高度和液压加载路径可获得成形精度较高、表面平滑无褶皱的试件。     

环形动力吸振器进行转子振动控制的实验

对环形动力吸振器在转子振动控制中的应用进行了实验研究,基于单圆盘转子模型和振动特征,设计了一种安置于轴承上的对分式环形动力吸振器.吸振器可以安装在两轴承间任意位置,不改变原有支撑结构,不影响转子动力特性.建立了转子吸振器减振实验台,对转子经过临界转速时的振动进行了实验,结果表明吸振器能有效降低转子经过临界转速时70%以上的振动.增加吸振器质量,可以精确调节吸振器固有频率,并拓宽减振频带.实验研究了吸振器安装位置与减振效果的关系,结果表明在转子振幅较大区域,减振效果较好.对比了不同数量吸振器在转子不平衡振动下的减振效果,结果表明安装2个吸振器的减振效果要好于单独1个作用时.      

Numerical investigation of full scale coaxial main rotor aerodynamics in hover and vertical descent

The original free vortex wake model was used for numerical investigation. Calculation of the aerodynamic characteristics in hover and vertical descent modes in the range of vertical descent speed of 0–30 m/s including the Vortex Ring State (VRS) area was performed. The calculations were carried out under the condition of variable blade pitch angle values providing a fixed time-average thrust value. Visualization data of free vortex wake shapes, flow structures, and velocity fields were obtained and analyzed. The time-dependences of the rotor’s thrust and torque coefficients were obtained and analyzed. The obtained data allows determining the boundaries of the VRS area by various criteria such as rotor thrust and torque pulsations, growth of rotor power consumption relative to the hover, growth of rotor induced velocities relative to the hover, and growth of the required rotor blade pitch angles values. The results of the study are compared with experimental and calculated data of other authors and can significantly supplement the available results of experimental and computational studies in this area.