Prediction of cutting forces in ball-end milling of 2.5D C/C composites

Machining of carbon/carbon (C/C) composite materials is difficult to carry out due to its high specific stiffness, brittleness, anisotropic, non-homogeneous and low thermal conductivity, which can result in tear, burr, poor surface quality and rapid wear of cutters. Accurate and fast pre-diction of cutting forces is important for milling C/C composite materials with high quality. This paper presents an alternative cutting force model involving the influences of the directions of fiber. Based on the calculated and experimental results, the cutting forces’ coefficients of 2.5D C/C com-posites are evaluated using multiple linear regression method. Verification experiment has been car-ried out through a group of orthogonal tests. Results indicate that the proposed model is reliable and can be used to predict the cutting forces in ball-end milling of 2.5D C/C composites.     

A dimension reduced INS/VNS integrated navigation method for planetary rovers

Inertial navigation system/visual navigation system (INS/VNS) integrated navigation is a commonly used autonomous navigation method for planetary rovers. Since visual measurements are related to the previous and current state vectors (position and attitude) of planetary rovers, the performance of the Kalman filter (KF) will be challenged by the time-correlation problem. A state augmentation method, which augments the previous state value to the state vector, is commonly used when dealing with this problem. However, the augmenting of state dimensions will result in an increase in computation load. In this paper, a state dimension reduced INS/VNS integrated nav-igation method based on coordinates of feature points is presented that utilizes the information obtained through INS/VNS integrated navigation at a previous moment to overcome the time rel-evance problem and reduce the dimensions of the state vector. Equations of extended Kalman filter (EKF) are used to demonstrate the equivalence of calculated results between the proposed method and traditional state augmented methods. Results of simulation and experimentation indicate that this method has less computational load but similar accuracy when compared with traditional methods.     

含激波的湍流流动高精度大涡数值模拟方法

针对采用亚格子模型进行含激波的湍流流动模拟时会面临激波附近的精度损失问题,考虑从通过亚格子模型以及数值模拟方法两方面的改进来实现湍流流动大涡模拟的精度提高.大涡模拟采用了Yee及Sj(o)green (2009)提出的高阶低耗散方法.该方法采用自适应的流场探测器以控制计算中所需区域的数值耗散,并考虑对动力学模型采用在激波位置使用Sagaut和Germano(2005)提出的单边亚格子过滤器和(或)直接禁用亚格子项等方法加以改进.对于标准的马赫数1.5和3条件下的激波-湍流干扰问题,上述新方法相较于全区域采用亚格子模型的方法均表现出了相似的精度提升.同时实现的数值精度改进方案采用了Harten的亚单元分辨过程来定位和锐化激波,并在精确激波位置附近的网格点处采用了单边测试滤波.     

C/SiC复合材料反射镜研究进展

反射镜在空间光学系统中起着非常关键的作用,目前已发展到第四代C/SiC复合材料。C/SiC复合材料具有低密度、高模高强、结构设计灵活等优点,已成为非常重要的新型反射镜材料。本文对四代反射镜的特点进行了归纳和对比,对C/SiC复合材料反射镜的结构设计、几种常用的制备工艺进行了整理和总结,并对目前国内外的研究进展进行了综述。     

视觉导航技术的发展

近20年来视觉导航技术发展迅速,在原理方法与技术实现上取得了重要突破,规模化应用已经成为可能。以视觉导航中光流、视觉里程计、视觉同步定位与地图构建等主流研究方向为对象,对其发展概况、基本原理、技术优势与难点等进行了简要介绍与分析,并从近期应用推广及长远发展角度对视觉及视觉组合导航技术进行了展望。     

轨/姿控发动机试验数据快速自动处理技术

轨/姿控发动机试验数据需即时提供,大量数据的快速自动处理技术未见报道。在简述了高空模拟试验特点、Pacific6000原理及数据文件结构后,分析了当前计算方法优缺点;在此基础上,将网络脚本语言的设计思想引入试验数据处理过程,提出了实现数据快速处理的数据流式算法,进而形成自动处理技术;基于此算法开发了工程应用软件,在实际试验中应用,取得了良好效果。该技术对类似计算和海量数据的快速处理具重要工程参考意义。     

New results and questions of lunar exploration from SELENE,Chang’E-1, Chandrayaan-1 and LRO/LCROSS

The moon has longstanding questions such as lunar environments, origin, formation and evolution, magnetization of crustal rocks, internal structure and possible life. The recent lunar missions, e.g., SELenological and ENgineering Explorer “KAGUYA” (SELENE), Chang’E-1, Chandrayaan-1, and Lunar Reconnaissance Orbiter/Lunar CRater Observation and Sensing Satellite (LRO/LCROSS), have provided new opportunities to explore and understand these issues. In this paper, we reviewed and presented the results and findings in the fields of lunar gravity, magnetic field, atmosphere, surface geomorphology and compositional variations, volcano, craters, internal structure, water and life science from new lunar exploration missions. In addition, the new objectives and scientific questions on lunar explorations in near future are presented and discussed.     

飞机过度/不足转向地面转弯操纵特性分析

为分析飞机着陆滑跑过程中的过度/不足转向特性,提高前轮转弯系统的操纵性能,提出了一种具有时变参数的飞机转弯系统的低阶等价模型,并结合系统稳定性的分析与飞行数据,可知在飞机着陆滑跑过程中的某个速度范围内,由于系统偏航角速度命令带宽衰减至零值附近,飞机的过度/不足转向特性曲线十分接近临界稳定速度边界,引起操纵特性严重恶化,由此提出了一种采用偏航角速度的局部负反馈来调节系统带宽的自校正增稳设计.分析与仿真结果说明:该模型能够解决使用高阶模型对飞机该项性能分析复杂的问题,可以作为高阶复杂模型分析的一种补充,且提出的增稳方法能使系统偏航角速度命令带宽保持在期望范围内,改善脚蹬操纵的敏感性,提高系统的操纵性能.      

基于LabWindows/CVI的IGS实时数据自动下载软件开发

随着全球导航卫星系统（GNSS）的日益发展,国际GNSS服务组织（IGS）所产生的各项数据以及产品日趋精确,应用也非常广泛。本文基于Labwindows/CVI开发平台,设计了从IGS的FTP服务器下载实时数据或产品的自动运行软件。该软件目前运行稳定、可靠,可以为IGS数据或产品的使用者提供自动化服务。     

面向非合作目标抓捕的机械臂轨迹规划方法

文章针对非合作目标抓捕问题设计了基于误差反馈系数的机械臂轨迹规划算法.考虑到空间机械臂在轨服务要求,采用反作用零空间方法来规划机械臂运动轨迹以实现机械臂与航天器之间的协调运动.为避免在规划起始阶段位姿误差较大可能导致机械臂关节速度过大的问题,引入了位姿误差反馈系数.为对空间机械臂抓捕非合作目标的轨迹规划技术进行验证,搭建了地面半物理仿真系统.试验结果表明,通过合理选择位姿误差反馈系数,设计的轨迹规划算法能够使固定基座机械臂末端执行器以较为均匀的速度逼近非合作目标,并能以较高精度实现对非合作目标的抓捕.该试验可以为空间机械臂抓捕非合作目标的轨迹规划提供参考.