Spectroscopy peculiarities of thermal plasma of electric arc discharge between electrodes with Zn admixtures

Plasma of the free burning electric arc between Ag–SnO₂–ZnO composite electrodes as well as brass electrodes were investigated. The plasma temperature distributions were obtained by Boltzmann plot method involving Cu I, Ag I or Zn I spectral line emissions. The electron density distributions were obtained from the width and from absolute intensity of spectral lines. The laser absorption spectroscopy was used for measurement of copper atom concentration in plasma. Plasma equilibrium composition was calculated using two independent groups of experimental values (temperature and copper atom concentration, temperature and electron density). It was found that plasma of the free burning electric arc between brass electrodes is in local thermodynamical equilibrium. The experimental verification of the spectroscopic data of Zn I spectral lines was carried out.     

Experimental investigation on silica dust lofting due to charging within micro-cavities and surface electric field in the vacuum chamber

The charged dust particles can be mobilized electrostatically by the repulsion between the adjacent grains and the surface electric field due to the incoming electron current and the charge accumulation within the micro-cavities. In this study, the experimental results of the initial vertical launching velocities and the maximum dust heights are compared with the estimated values for the lofted spherical dust grains by the patch surface charging equations. Silica particles with the sizes between <6 and 45?µm in radius are loaded on a graphite plate, and they are exposed to the electron beam with 450?eV energy under 4?×?10^?3?Pa vacuum chamber pressure. During the first set of the experiments, the dust samples are tested without an initial compression process and an additional horizontal electric field. Second, the dust samples are compressed by two different weights in order to increase the packing density under approximately 780.7?Pa and 3780?Pa. Finally, the dust grains are placed between the two parallel aluminum plates to apply approximately 2000?V/m and 4800?V/m horizontal electric field. A high-speed camera is used to record the transportation of the dust grains together with a microscopic telescope, and the results point out that the patch surface dust-charging model estimations are in agreement with the first experiments. On the other hand, the dust particles from the compressed samples are lofted with higher velocities than the estimations, and the number of the dust lofting observations decreases significantly, which demonstrates the importance of the micro-cavities and the increased charging requirement to overcome the contact forces. When the horizontal electric field is present, the initial vertical launching velocities are measured to be lower than the other experiments, which can be attributed to the decreased charging requirement for the dust lofting as a result of inter-particle collisions and rolling motion. According to the experimental results, the electrostatic dust transportation can be controlled not only by the ambient plasma and the solar irradiation on the airless planetary bodies, but also by the surface properties such as the contact surfaces between the dust grains, the number of the micro-cavities related to the packing density, and the presence of the horizontal electric field contributing to the external forces by other particle motions.     

液化天然气作为航空燃料的发展趋势及特点分析

为研究液化天然气(LNG)作为航空燃料的可行性,对LNG的特点、发展趋势及作为航空燃料存在的问题进行了分析.采用了横向比较的方法,将LNG与新的航空替代燃料和传统航空燃料进行了比较和计算分析.结果表明:与新的航空替代燃料相比,LNG具有来源广泛、经济性好、发动机适应性强等优点.与传统航空燃料相比,LNG的储量大,可使用100年以上;可燃极限宽、污染物排放低,NOx排放仅为航空煤油的1/4;单位质量能量密度高、成本低,其燃料成本仅为航空汽油的一半,航空煤油的1/3;同时还具有可用于发动机高温部件冷却用的冷能,是一种极富潜力的航空燃料.指出在LNG作为航空燃料方面急需开展动力系统与飞机结构的匹配、燃料相态的有效转化及不同燃料在燃烧室内的反应特性等方面的研究工作.      

混合总线测控系统在R0110燃气轮机低排放试验中的应用

针对R0110燃气轮机低排放试验内容的要求,提出了对试验平台的测试与控制系统的设计方案,并详细介绍了该试验平台测试系统与控制系统的硬件与软件结构和功能的实现,其中通过利用混合总线方式将原测试系统与新测试系统相结合,扩展了试验器的测试能力.根据试验中多路燃料供给规律的要求,提出燃料供给手动、自动2种控制方式,进一步提高了试验控制上的智能性.在自动控制程序设计中,充分考虑了燃料供应的风险,并制定了相应的处理方案,保障了试验的顺利完成,而且提高了该试验器的智能化水平和整体测控能力.     

三旋流器加装外套环对燃烧性能的影响

对带有两种不同头部结构（基准型为方案1,头部加装外套环为方案2）的三旋流单头部燃烧室进行了研究,对有两种头部结构的燃烧室进行了流场和燃烧场的数值模拟,在相同的进口试验条件下,用燃气分析法和15点测温耙分别测量了两种头部的燃烧效率、出口冒烟数和出口温度场.结果表明:三旋流器的燃烧效率超过了99.7%,加装外套环后其流场、温度场分布均较基准型有所改善,回流区更加饱满,油气混合和燃油雾化效果增强,出口温度分布系数（OTDF）和出口冒烟数分别降低了36%和25%.      

煤基喷气燃料在地面单管燃烧室内燃烧和排放特性研究

为研究煤基喷气燃料的燃烧和排放特性,通过改造的单管燃烧室评估了煤基喷气燃料和石油基RP-3喷气燃料的燃烧和排放特性差异.试验结果表明:煤基喷气燃料具有更加优异的贫油点火和贫油熄火性能,两种喷气燃料的燃烧和排放特性随燃油流量和燃烧室出口温度的改变呈现出一致的变化趋势,在相同质量流量下,煤基喷气燃料的燃烧和排放性能要低于RP-3,在相同燃烧室出口温度时,煤基喷气燃料燃烧时的壁温要低于RP-3.      

Design and performance of a vacuum-UV simulator for material testing under space conditions

This paper describes the construction and performance of a VUV-simulator that has been designed to study degradation of materials under space conditions. It is part of the Complex Irradiation Facility at DLR in Bremen, Germany, that has been built for testing of material under irradiation in the complete UV-range as well as under proton and electron irradiation. Presently available UV-sources used for material tests do not allow the irradiation with wavelengths smaller than about 115 nm where common Deuterium lamps show an intensity cut-off. The VUV-simulator generates radiation by excitation of a gas-flow with an electron beam. The intensity of the radiation can be varied by manipulating the gas-flow and/or the electron beam.     

UV镜对摄影测量精度的影响及消除方法研究

针对摄影测量中加入UV镜后对测量结果的影响问题进行了研究。通过理论推导UV镜对于像点坐标偏移的影响,得出UV镜对像点偏移的影响规律,并提出采用自检校光束法平差的方法消除UV镜对像点偏移的影响,实验证明本文得出的对UV镜产生的像点偏移规律的分析及解决方法都是正确的。     

在片校准标准件基底边界条件影响

通过分析国内外校准标准件物理边界条件,研究不同校准基底的物理边界条件对共面波导（CPW）传输线特性和校准准确度的影响。研制了W波段砷化镓衬底的多线TRL在片校准标准件,将在片校准标准件分别放置在金属卡盘、玻璃片、吸波材料三种校准基底上。用三种不同校准基底的校准标准件对试验装置校准后,分别提取了CPW传输线的衰减常数、相对介电常数和特征阻抗,并对商用校准标准件104-783A的短路标准和传输线标准进行了测试,验证了结果的合理性。     

基于神经网络的智能刀具状态检测系统

可靠的在线刀具磨损状态检测是柔性制造系统、计算机集成制造系统以及自动化机床必不可少的一个环节。文中论述了用反传神经网络与一类模糊神经网络分析处理由力传感器和声发射传感器所测得的刀具状态信号,识别出刀具的磨损情况,从而进一步实现刀具磨损状态的在线检测,控制自动机床及时更换刀具。本研究对四种规格的钻头的磨损情况进行了全程检测,并比较分析了反传神经网络与模糊神经网络对这一问题的有效性。实验结果表明,这两种方法对处理刀具磨损状态检测均有显著的效果与很高的准确性。用一类模糊神经网络处理多传感器信息是实现刀具状态在线检测的一个极为有效的方法。