灰色聚类法在航空装备维修保障能力评估中的应用

通过对航空装备维修保障系统的分析,用灰色聚类法给出了航空装备维修保障能力评估指标体系综合评估模型,并进行了实例分析.     

虚构解方法程序验证

对求解偏微分方程问题的程序的严格验证,一直以来由于其精确解有限,较难进行,针对这种情况,本文给出了一种新的程序验证方法,虚构解方法,该方法旨在解决大型科学计算程序如何较严格地进行程序验证这一问题;该方法通过构造虚构解,修改原控制方程,然后通过对计算结果的分析处理达到对程序的精确验证;文中给出了一组通用的虚构解的选取办法,解决了虚构解方法验证过程中确定虚构解的问题;同时还给出了运用该方法对非结构二维Euler计算程序进行验证的具体例子,网格收敛分析结果表明该方法是一种有效的程序验证方法,并且具有较好的通用性。     

Particle simulation of grid system for krypton ion thrusters

The transport processes of plasmas in grid systems of krypton (Kr) ion thrusters at different acceleration voltages were simulated with a 3D-PIC model, and the result was compared with xenon (Xe) ion thrusters. The variation of the screen grid transparency, the accelerator grid current ratio and the divergence loss were explored. It is found that the screen grid transparency increases with the acceleration voltage and decreases with the beam current, while the accelerator grid current ratio and divergence loss decrease first and then increase with the beam current. This result is the same with Xe ion thrusters. Simulation results also show that Kr ion thrusters have more advantages than Xe ion thrusters, such as higher screen grid transparency, smaller accelerator grid current ratio, larger cut-off current threshold, and better divergence loss characteristic. These advantages mean that Kr ion thrusters have the ability of operating in a wide range of current. Through comprehensive analyses, it can be concluded that using Kr as propellant is very suitable for a multi-mode ion thruster design.     

获取自由飞模型气动导数的综合飞行试验研究

过去已进行过多个机种的自由飞模型大迎角特性试验，但均为单一项目的试验，现介绍了将获取放宽静稳定度特性和气动导数两个项目综合于一个自由飞模型飞行试验项目中的情况，用脉冲升降舵激发起模型的纵向短周期运动，用参数辩识方法获取气动导数，试验结果表明这种方法是可行的，为从事本专业及相关专业的科研人员提供了参考。     

应用逆系统方法设计空空导弹控制器

对非线性控制的逆系统方法原理进行了介绍，将该方法应用于空空导弹制导设计中，设计了导弹质心运动动力学系统的控制器，该控制器通过对弹道坐标系下导弹的纵向过载和法向过载实施控制，可使导弹在控制系统中的速度、偏航角和俯仰角输出信息渐近跟踪制导指令，以实现空空导弹对攻击目标的跟踪。     

飞机静力试验中机翼的载荷分配研究

针对飞机静力试验加载的问题,为使得试验加载力反映飞机受力特性,由载荷分配前输入的典型剖面上剪力、弯矩、扭矩推导出相邻剖面之间的剪力、弯矩、扭矩,通过构造带内力约束的拉格朗日极值函数求出试验加载力,将载荷分配前输入的内力与试验载荷分配后产生的内力进行对比分析,可以得出:通过构造带内力约束的拉格拉日极值函数法分配得到的试验载荷符合载荷的传递,能够满足飞机静力试验加载的要求,可以用于飞机静力试验的加载。     

Aerodynamic optimization design for high pressure turbines based on the adjoint approach

A first study on the continuous adjoint formulation for aerodynamic optimization design of high pressure turbines based on S2surface governed by the Euler equations with source terms is presented.The objective function is defined as an integral function along the boundaries,and the adjoint equations and the boundary conditions are derived by introducing the adjoint variable vectors.The gradient expression of the objective function then includes only the terms related to physical shape variations.The numerical solution of the adjoint equation is conducted by a finitedifference method with the Jameson spatial scheme employing the first and the third order dissipative fluxes.A gradient-based aerodynamic optimization system is established by integrating the blade stagger angles,the stacking lines and the passage perturbation parameterization with the quasi-Newton method of Broyden–Fletcher–Goldfarb–Shanno(BFGS).The application of the continuous adjoint method is validated through a single stage high pressure turbine optimization case.The adiabatic efficiency increases from 0.8875 to 0.8931,whilst the mass flow rate and the pressure ratio remain almost unchanged.The optimization design is shown to reduce the passage vortex loss as well as the mixing loss due to the cooling air injection.     

ANALYSIS OF SHEAR STRESS DISTRIBUTION IN HONEYCOMB AIRCRAFT WING STRUCTURE SUBJECTED TO (S.T.) TORQUE

ＡＮＡＬＹＳＩＳＯＦＳＨＥＡＲＳＴＲＥＳＳＤＩＳＴＲＩＢＵＴＩＯＮＩＮＨＯＮＥＹＣＯＭＢＡＩＲＣＲＡＦＴＷＩＮＧＳＴＲＵＣＴＵＲＥＳＵＢＪＥＣＴＥＤＴＯ（Ｓ．Ｔ．）ＴＯＲＱＵＥＫｈａｌｉｄＭ．Ｔａｈｉｒ，ＺｈａｎｇＸｉｎｇ（ＤｅｐａｒｔｍｅｎｔｏｆＦ...     

求解涡扇发动机数学模型的有限域搜索方法

提出一种基于N-R迭代方法的有限域优化搜索法,用于求解涡扇发动机数学模型。该方法不仅具有N-R优化迭代求解特色,还具有将初猜解附近划定域进行泛搜能力,使迭代运算具有强收敛性和平稳性。该方法所定义的迭代因子可通过编程自动调整,进而可以确定最小迭代次数及此意义下的最优迭代因子。      

飞行器控制系统的高精度计算方法

对于连续时间线性二次最优控制问题，在动力学方程和价值泛函的基础上，给出其全状态下的微分方程，进而将精细时程积分法引入上述问题，其优点为，放弃了传统的差分算法，使计算过程既简便又稳定；避免了Ｒｉｃｃａｔｉ代数方程的求解；具有非常高的计算精度。通过对某飞行器控制系统的计算，充分说明了上述特色。