高超声速边界层的转捩及预测

首先描述了边界层转捩的基本过程及研究内容。在此基础上,指出了高超声速边界层不同于不可压缩边界层的流动不稳定性特性,并介绍了边界层的转捩机理与感受性特征;给出了高超声速三维边界层中预测转捩的常用方法,并着重介绍了多用于工程实际的e N方法以及对e N方法的理性改进,同时列举了在高超声速三维边界层中应用e N方法实现转捩预测的多个实例。最后,分析并总结了高超声速边界层转捩预测所存在的困难及需要解决的问题。     

高超声速边界层转捩机理及应用的若干进展回顾

高超声速边界层转捩对飞行器的热传递、表面摩阻和流动分离等有重要影响,尤其是再入飞行器和吸气式巡航飞行器。然而,人们对边界层转捩机理中的很多问题认识还不清楚,或存在争议。本文从扰动波演化的角度回顾了高超声速边界层感受性、线性稳定性和非线性作用的国内若干研究进展,并以基于谐波共振的人工转捩技术为例示范了这些机理认识在转捩控制上的应用。扰动的产生和发展是认识边界层转捩机理的核心。通过研究扰动波来认识边界层转捩机理,开展应用创新研究对提升飞行器性能具有重要意义。     

Identification of a 2D turbulent wind spectrum

Turbulent wind spectrum models usually involve nonrational terms. For such models the development of a Markovian time simulator relies on a rational approximation obtained by the way of an identification stage. This paper presents a general method to manage this identification stage, that provides us with a family of stable rational approximations which is proved to converge towards the true model as the dimension increases. We first give an exact but infinite dimensional state space representation of the spectrum. It is based on the use of a diffusive equation. For bi-dimensional (2D) signals it also uses decoupling by spatial Fourier transformation. Then the discretization of this exact model leads easily to stable finite dimensional approximations over a prescribed frequency range. This approach is applied to the identification of a theoretical 2D turbulent wind spectrum, and of a 1D turbulent wind spectrum estimated from in flight recorded data.     

平板上钝缘舵在超声速绕流中的三维分离特性研究

对于平板上的直立钝缘舵在M_∞=1.79、2.04和2.50的条件下,研究了该平板干扰区中的三维分离特性。着重讨论了钝缘直径、舵面迎角和来流马赫数对主分离线位置和形状的影响。分析了该类三维分离在性态上更强地依赖于无粘流动特性。此外,还对分离区内的二次分离发展过程和形态进行了初步讨论。     

Multi-channel discharge characteristics cutting by ultra-fine wire-EDM

Compared with a copper wire electrode, molybdenum wire with a poor conductor is usually used as the electrode in high speed wire-cut electrical discharge machining(HSWEDM), so the resistance of an ultra-fine wire cannot be ignored. To study the differences of discharge characteristics between the ultra-fine wire and the conventional diameter wire, the continuous discharge waveform of two kinds of wire electrodes was compared. It was found that there was a multichannel discharge phenomenon in the...     

Case study of inclined sporadic E layers in the Earth’s ionosphere observed by CHAMP/GPS radio occultations: Coupling between the tilted plasma layers and internal waves

We have used the radio occultation (RO) satellite data CHAMP/GPS (Challenging Minisatellite Payload/Global Positioning System) for studying the ionosphere of the Earth. A method for deriving the parameters of ionospheric structures is based upon an analysis of the RO signal variations in the phase path and intensity. This method allows one to estimate the spatial displacement of a plasma layer with respect to the ray perigee, and to determine the layer inclination and height correction values. In this paper, we focus on the case study of inclined sporadic E (E_s) layers in the high-latitude ionosphere based on available CHAMP RO data. Assuming that the internal gravity waves (IGWs) with the phase-fronts parallel to the ionization layer surfaces are responsible for the tilt angles of sporadic plasma layers, we have developed a new technique for determining the parameters of IGWs linked with the inclined E_s structures. A small-scale internal wave may be modulating initially horizontal E_s layer in height and causing a direction of the plasma density gradient to be rotated and aligned with that of the wave propagation vector k. The results of determination of the intrinsic wave frequency and period, vertical and horizontal wavelengths, intrinsic vertical and horizontal phase speeds, and other characteristics of IGWs under study are presented and discussed.     

Computational engineering analysis of external geometrical modifications on MQ-1 unmanned combat aerial vehicle

This paper focuses on the effects of external geometrical modifications on the aerodynamic characteristics of the MQ-1 predator Unmanned Combat Aerial Vehicle (UCAV) using computational fluid dynamics. The investigations are performed for 16 flight conditions at an altitude of 7.6 km and at a constant speed of 56.32 m/s. Two models are analysed, namely the baseline model and the model with external geometrical modifications installed on it. Both the models are investigated for various angles of attack from −4° to 16°, angles of bank from 0° to 6° and angles of yaw from 0° to 4°. Due to the unavailability of any experimental (wind tunnel or flight test) data for this UCAV in the literature, a thorough verification of calculations process is presented to demonstrate confidence level in the numerical simulations. The analysis quantifies the loss of lift and increase in drag for the modified version of the MQ-1 predator UCAV along with the identification of stall conditions. Local improvement (in drag) of up to 96% has been obtained by relocating external modifications, whereas global drag force reduction of roughly 0.5% is observed. The effects of external geometrical modifications on the control surfaces indicate the blanking phenomenon and reduction in forces on the control surfaces that can reduce the aerodynamic performance of the UCAV.     

Streamwise vortex generation by the rod

The technology development related to aerodynamics is leading to ever increasing loads of wings, airfoils and turbine and compressor blades. The increase in aerodynamic forces is often leading to flow separation and depreciation of the aerodynamic performance of flying objects or propulsion systems. Flow control methods are required to avoid these negative effects. In the recent two decades the flow control by means of air-jet vortex generators has been also intensively investigated. In this method a streamwise vortex is introduced by an oblique jet. The necessity to supply air by a pipe system may be considered a disadvantage. In order to eliminate this feature, it has been proposed to put out a rod instead of a jet. It has been shown that the application of a rod can introduce the same effect as a jet, as long as the streamwise vortex generation is concerned and appropriate dimensions are used. The present paper focuses on the influence of rod vortex generators on a flow pattern downstream. The results presented here concern experimental and numerical investigations and provide guidelines for the design of a new flow control method dedicated mainly to external flows.     

重型燃气轮机高雷诺数CDA叶型转捩特性数值计算

为研究重型燃气轮机的压气机叶片在高雷诺数工况下的气动性能,基于Gamma-Theta转捩模型的雷诺时均方程对某可 控扩散叶型进行了数值计算。通过对比不控制马赫数与控制马赫数,分析高雷诺数对可控扩散叶型气动性能及转捩特性的影响。 结果表明：在不控制马赫数条件下,在零攻角时,雷诺数从7×10 5 增大为9×10 5 ,总压损失增加了约391.95%;在高雷诺数工况下随 着雷诺数的增大,叶片流动损失不断增大,叶片可用攻角范围减小,同时在叶片吸力面出现激波,干扰转捩的产生。在控制马赫数 条件下,当Ma=0.6时,在零攻角工况下,雷诺数从8.2×10 5 增大为1×10 7 ,总压损失减小了约38.98%,吸力面转捩起始点从4.78%弦 长处前移至1.11%弦长处;在高雷诺数工况下,叶片流动损失随着雷诺数的增大不断减小,吸力面转捩位置前移。     

推进剂药浆混合均匀性研究

用Ｈａａｋｅ流变仪研究了高固体含量丁羟推进剂的混合均匀性,提出了用复合粘度和复合模量作混合均匀性表征参数的评价方法。研究结果表明,高固体含量丁羟三组元配方的预混阶段需１５ｍｉｎ～２０ｍｉｎ快速混合,总预混时间以３０ｍｉｎ～３５ｍｉｎ为宜。