航空发动机气路颗粒静电监测技术模拟实验

探讨了航空发动机气路颗粒静电监测技术的工作原理和技术特点。为进行该技术的可行性研究搭建了模拟实验台,利用电晕模拟了气路故障发生时尾气中不同大小的带电颗粒,使用自制的探针式静电传感器对运动带电颗粒进行监测,信号调理器将感应电荷放大并转换为对应的电压,结果显示：①静电传感器能够监测到运动带电颗粒;②感应电压幅值与颗粒大小有关;③感应电压波形与颗粒性质有关;④大量小颗粒和单个大颗粒混合物的感应电压表现出两者各自的特征。     

弹体自旋条件下姿控发动机控制律设计

针对大气层内带有横向喷流姿控发动机和尾部气动舵的导弹,研究了弹体自旋条件下的姿态控制问题。以导弹的横向加速度为输出,建立了姿态系统数学模型,并对模型进行了分析和简化。考虑了双通道控制和单通道矢量控制两种控制方式,针对姿控发动机的离散工作特点,分别研究了控制律设计问题,实现了横向加速度的快速跟踪。针对喷流干扰效应,给出了喷流放大因子的在线估计算法。最后,进行了数值仿真,仿真结果说明了所提方法的有效性。     

Advances in the Researches of the Middle and Upper Atmosphere in China in 2012–2014

In this report we summarize the research results by Chinese scientists in 2012–2014. The focuses are placed on the researches of the middle and upper atmosphere, specifically the researches related to ground-based observation capability development, dynamical processes, the property of circulation and chemistry-climate coupling of the middle atmospheric layers.     

进化策略在火箭发动机静态特性研究中的应用

建立了全流量补燃循环发动机的静态特性的数学模型.描述静态特性的数学模型是由一组非线性方程组成的.采用基于进化策略的进化算法求解全流量补燃循环发动机的静态特性方程,将该模型的非线性方程组求解问题转化为求带有约束的极小值的优化问题,建立了进化策略计算模型.讨论了进化策略算法在进化计算过程中使用的变异算子、重组算子和选择算子的设计,以及对约束条件的处理方法.数值计算的结果表明,利用基于进化策略的算法可以在较大范围内进行全流量循环液体火箭发动机的静态特性研究.     

航空发动机喷嘴结焦积碳的性质

针对航空燃料燃烧时会在航空发动机喷嘴处产生大量结焦积碳,影响航空飞行器的飞行安全和使用寿命这一问题,研究了某型航空发动机喷嘴零部件上结焦积碳的生成情况.采用扫描电镜(SEM,Scanning Electron Microscope)、透射电镜(TEM,Transmission Electron Microscopy)、能谱仪(EDS,Energy Disperse Spectroscopy)以及X射线衍射技术(XRD,X-ray Diffraction)对结焦积碳的微观形态和性质进行了分析.结果表明:喷嘴零部件上生成的结焦积碳主要有两种形态:一种是丝状焦,另一种是颗粒状焦.其中,丝状焦只出现在零部件表面较光滑的位置,包括短纤维丝状焦和不定形丝状焦,是由金属催化作用所形成的;其形成与喷嘴零部件的结构、材质及表面粗糙度有关.颗粒状焦则主要集中在活塞表面,包括颗粒团聚状焦和颗粒分散状焦,是由催化作用与燃料热裂解共同作用所形成的.      

Index allocation for a reusable LOX/CH4 rocket engine

Reusable rocket engines are the core components of reusable launch vehicles, and have thus become a major focus of aerospace engineering research in recent years. In practice, subsystem design is based on the overall index allocation of an engine; therefore, a multidisciplinary optimization approach is necessary. In this study, design of a reusable methane/liquid oxygen (LOX/CH4) rocket engine with a gas generator cycle was investigated using multidisciplinary optimization. Two parameters were chosen as design variables: pressure and fuel mix ratio of the main combustion chamber. Optimization objectives were specific impulse, structural mass, and life cycle cost of the reusable rocket engine, and constraints were assigned to each discipline according to rocket design requirements. Then, an optimization model was developed, and optimal design parameters were acquired for the LOX/CH4 rocket engine. The proposed method is effective for designing the index allocation of reusable rocket engines and takes into account the multidisciplinary nature of complex systems.     

Multi-coset angular sampling-based compressed sensing of blade tip-timing vibration signals under variable speeds

Blade Tip-Timing (BTT) has been regarded as a promising way of on-line blade vibration monitoring. But blind multi-band BTT vibration reconstruction is a big challenge under variable speeds and under-sampling. In order to deal with it, a novel Compressed Sensing (CS) method is proposed based on Multi-Coset Angular Sampling (MCAS) in this paper. First, multi-coset sampling scheme of BTT vibration signals is presented. Then the CS model of BTT vibration signals is derived in order domain. A sufficient condition of the number of BTT sensors is derived for perfect reconstruction and optimal placement of BTT sensors is determined by minimizing the condition number. In the end, numerical simulations are done to validate the proposed method and the performances of four reconstruction algorithms are compared, i.e., Orthogonal Matching Pursuit (OMP), Multiple Signal Classification (MUSIC), Basis Pursuit Denoising (BPDN) and Modified Focal Underdetermined System Solver (MFOCUSS). Influences of the sensor placement, the number of BTT sensors and measurement noises on the reconstruction performances are also testified. The results demonstrate that the proposed method is feasible and the overall performance of the BPDN algorithm is the best among the four algorithms. Also the reconstruction performance decreases with the accelerations of rotating speed.     

磁悬浮飞轮位移传感器谐波扰动的主动抑制

针对磁悬浮飞轮转子位移传感器谐波噪声引起的多频扰动问题,提出了一种基于级联相移陷波器的全转速自适应控制方法。首先根据多频扰动特性,构造分级的自适应相移陷波器,每级陷波器对应一个陷波频率;然后,将陷波器级联,分别设置相角补偿矩阵解决闭环控制回路在全转速范围内的稳定性问题。最后,以五自由度磁悬浮飞轮为实验对象进行实验验证,实验结果表明,所提出算法能够在全转速范围内有效地抑制谐波扰动。     

超燃冲压发动机控制方法

针对超燃冲压发动机地面试验和飞行试验的需求,本文论述了超燃冲压发动机控制的基本问题。在对这些基本问题认识的基础上,初步给出了超燃冲压发动机控制系统的基本框架,探索了控制任务的解决方案。主要包括推力控制、燃烧模态控制、进气道控制、调节/保护多回路切换控制和发动机/飞行器一体化协调控制。最后对超燃冲压发动机控制未来发展进行了展望。     

Complex Flow for Wing-in-ground Effect Craft with Power Augmented Ram Engine in Cruise

Power augmented ram (PAR) engine is a popular equipment to reduce the requirement of power for takeoff and improve aerodynamic performance. To provide detailed insight into the aerodynamic characteristics of wing-in-ground effect (WIG) craft with PAR engine, numerical simulations are carried out on WIG craft models in cruise. Simplified engine models are applied to the simulations. Two cruise modes for PAR engine are considered. The aerodynamic characteristics of the WIG craft and other features are studied. Comparisons with WIG craft model without PAR show that shutoff of PAR engine results in an increase in drag and less change in lift. Accordingly for the work of PAR engine, the air flow blown from the engine accelerates the flow around the upper surface and a high-speed attached flow near the trailing edge is recorded. With the schemed PAR flow, more suction force is realized and the flow features over the wing vary noticeably. It is also shown that the Coanda effect, provided with an attached flow, introduces an appropriate and practical flow mode for WIG craft with PAR engine in cruise. The results refresh our understanding on aerodynamic characteristics of WIG craft.