碳纤维及碳-碳复合材料透射电镜样品制备方法

研究了碳纤维和碳-碳复合材料透射电镜样品制备技术。超薄切片法具有很多优点,并与离子轰击法进行了比较。用金刚石刀超薄切片法制备的薄膜样品电子透明度高,平行度好,而且具有清洁的表面。并对在电镜观察中识别在薄膜的制备过程中引入的假象做了分析。     

一种改进的SMI旁瓣干扰抑制算法研究

采样矩阵求逆（SMI）算法是常用的自适应旁瓣对消算法。针对在低快拍下数据协方差矩阵的小特征值扩散,进而引起自适应波束副瓣升高的问题,提出了一种改进SMI算法的方法。该方法通过快拍数据的滑动平均获得协方差矩阵,使协方差矩阵小特征散布变小,能够很好地抑制副瓣电平,从而使算法适用于低快拍数据。     

论加速可靠性增长试验(Ⅷ)试验的组织与实施

对加速可靠性增长试验的组织与实施，包括加速应力的选择，加速应力水平值及加速应力水平个数的确定，样本量的确定，分组数据区间长度的确定，试验终止时间的确定，可靠性增长模型的选择，图分析与数值分析的综合利用等问题进行了讨论。     

变幅单频交流信号幅度的同步采集方法

叙述和介绍了采集交流信号的常用方法，指出了常用方法在采集幅度快速变化的交流小信号时存在的缺陷。在此基础上提出了一种新的交流信号同步采集方法，适合于对采样率和采集精度要求较高的场合。     

Role of sample return and sample science in low cost missions

Sample return is an essential component of solar system exploration. Samples provide a unique data set that is critical for understanding formation and evolution of our solar system. This uniqueness is based on the scale of observations, precision of measurements, the ability to modify experiments as logic and technology dictate, and the ability to use instruments free of the constraints on mass, power, reliability, and data rate of flight instruments. Advances in analytical capabilities in recent years enable fundamental measurements to be made on extremely small samples, greatly reducing mass constraints on robotic sample return spacecraft. Sample studies provide irreplaceable ground truth for remotely-sensed data on planetary surfaces and fit within a variety of architectures for human exploration of the solar system.     

System design of the Hayabusa 2—Asteroid sample return mission to 1999 JU3

The Japan Aerospace Exploration Agency is currently developing the second asteroid sample return mission, designated as Hayabusa 2. Following the successful return of Hayabusa from the asteroid “Itokawa”, Hayabusa 2 is designed as a round-trip mission to the asteroid “1999 JU3”. The 1999 JU3 is a C-type asteroid, which is believed to contain organic matter and hydrated minerals. Thus, it is expected that successful sample collection will provide additional knowledge on the origin and evolution of the planets and, in particular, the origin of water and organic matter. The current mission scenario will enable the spacecraft to reach 1999 JU3 in the middle of 2018 and perform an asteroid proximity operation for 1.5 years. Three touch downs for sampling and one 2-m-class crater generation by means of a high-speed impact operation are planned during the asteroid proximity operation. The samples are to be brought back to the Earth by a re-entry capsule. The present paper describes the system design of Hayabusa 2, some key technical challenges of the mission, and the development status.     

Development of a thin section device for space exploration: Overview and system performance estimates

In this paper we present a conceptual design of a spaceborne instrument for the in situ production of rock thin sections on planetary surfaces. The in situ Automated Rock Thin Section Instrument (IS-ARTS) conceptual design demonstrates that the in situ production of thin sections on a planetary body is a plausible new instrument capability for future planetary exploration. Thin section analysis would reduce much ambiguity in the geological history of a sampled site that is present with instruments currently flown. The technical challenge of producing a thin section device compatible with the spacecraft environment is formidable and has been thought too technically difficult to be practical. Terrestrial thin section preparation requires a skilled petrographist, several preparation instruments that individually exceed typical spacecraft mass and power limits, and consumable materials that are not easily compatible with spaceflight. In two companion papers we present research and development work used to constrain the capabilities of IS-ARTS in the technical space compatible with the spacecraft environment. For the design configuration shown we conclude that a device can be constructed that is capable of 50 sample preparations over a 2 year lifespan with mass, power, and volume constraints compatible with current landed Mars mission configurations. The technical requirements of IS-ARTS (mass, power and number of samples produced) depend strongly on the sample mechanical properties, sample processing rate, the sample size and number of samples to be produced.     

Development of a thin section device for space exploration: Rock cutting mechanism

We have developed a rock cutting mechanism for in situ planetary exploration based on abrasive diamond impregnated wire. Performance characteristics of the rock cutter, including cutting rate on several rock types, cutting surface lifetime, and cut rock surface finish are presented. The rock cutter was developed as part of a broader effort to develop an in situ automated rock thin section (IS-ARTS) instrument. The objective of IS-ARTS was to develop an instrument capable of producing petrographic rock thin sections on a planetary science spacecraft. The rock cutting mechanism may also be useful to other planetary science missions with in situ instruments in which sub-sampling and rock surface preparation are necessary.     

Rapid impactor sample return (RISR) mission scenario

Due to the long lead time and great expense of traditional sample return mission plans to Mars or other astronomical bodies, there is a need for a new and innovative way to return materials, potentially at a lower cost. The Rapid Impactor Sample Return (RISR) mission is one such proposal. The general mission scenario involves a single pass of Mars, a Martian moon or an asteroid at high speeds (7 km/s), with the sample return vehicle skimming just 1 or 2 m above a high point (such as a top ridge on Olympus Mons on Mars) and releasing an impactor. The impactor strikes the ground, throwing up debris. The debris with roughly the same forward velocity will be captured by the sample return vehicle and returned to Earth. There is no delay or orbit in the vicinity of Mars or the asteroid: RISR is a one-pass mission. This paper discusses some of the details of the proposal. Calculations are presented that address the question of how much material can be recovered with this technique. There are concerns about the effect of Mars tenuous atmosphere. However, it will be noted that such issues do not occur for RISR style missions to Phobos, Deimos, or asteroids and Near Earth Objects (NEOs). Recent test results in the missile defense community (IFTs 6–8 in 2001, 2002) have scored direct hits at better than 1 m accuracy with closing velocities of 7.6 km/s, giving the belief that accuracy and sensing issues are developed to a point that the RISR mission scenario is feasible.     

Human spaceflight and an asteroid redirect mission: Why?

The planning of human spaceflight programmes is an exercise in careful rationing of a scarce and expensive resource. Current NASA plans are to develop the new capability for human-rated launch into space to replace the Space Transportation System (STS), more commonly known as the Space Shuttle, combined with a heavy lift capability, and followed by an eventual Mars mission. As an intermediate step towards Mars, NASA proposes to venture beyond Low Earth Orbit to cis-lunar space to visit a small asteroid which will be captured and moved to lunar orbit by a separate robotic mission. The rationale for this and how to garner support from the scientific community for such an asteroid mission are discussed. Key points that emerge are that a programme usually has greater legitimacy when it emerges from public debate, mostly via a Presidential Commission, a report by the National Research Council or a Decadal Review of science goals etc. Also, human spaceflight missions need to have support from a wide range of interested communities. Accordingly, an outline scientific case for a human visit to an asteroid is made. Further, it is argued here that the scientific interest in an asteroid mission needs to be included early in the planning stages, so that the appropriate capabilities (here the need for drilling cores and carrying equipment to, and returning samples from, the asteroid) can be included.