A numerical study of segmented cooling-stream injection in supersonic film cooling

The present study proposes a segmented cooling-stream injection structure based on a certain coolant mass flow rate, and numerically investigates the effect of segmented cooling-stream injection on supersonic film cooling. The results indicate that without shock-wave impingement and with helium as the coolant, segmented cooling-stream injection can reduce the mixing between the mainstream and the cooling stream to produce better cooling performance than single injection, especially at larger coo...     

超低空反导中的多径效应仿真

为得到超低空背景下目标特性参数对脉冲雷达导引头目标检测的影响,根据导引头和目标的空间几何关系,推导了波程差、多普勒频移、相位差的表达式,并结合比例导引法建立多径效应仿真模型。针对目标飞行参数进行仿真,并结合仿真结果对参数的影响效果进行了分析,为导引头末制导段的弹道规划与有效地规避多径效应提供参考依据。     

A new approach for pulse amplitude measurement using Lagrange’s interpolation for radiation or particle detectors

In radiation detector signal processing, usually, the charge-sensitive preamplifier converts the small charge signal coming from the semiconductor-based detector into voltage form and then the signal is further amplified to measure the energy of the incoming radiation. The voltage pulse from a charge-sensitive preamplifier (CSPA) is amplified using a shaping amplifier which reduces the signal bandwidth. To achieve better energy resolution, precise measurement of the peak amplitude of shaping amplifier output is required. The signal processing methods are available in which the signal from the charge-sensitive preamplifier can be directly digitized using high-speed Analog to Digital Converters (ADC), and then further signal processing such as gain and shaping is carried out inside the Field Programmable Gate Arrays (FPGA). For multiple detector systems, digital signal processing methods are quite difficult to implement in Field Programmable Gate Arrays (FPGA). In this context, The development of an alternative technique is initiated that uses a charge-sensitive preamplifier, shaping amplifier, low sampling analog-to-digital converter, and FPGA, where LaGrange’s interpolation technique is implemented in FPGA to precisely measure the peak of the analog pulse. In this paper, the comparison of the proposed method with other pulse amplitude measurement techniques is discussed. Results show that the implemented technique gives similar energy resolution compared to digital pulse processing and standard peak detector-based techniques.     

低反力度跨声速转子的叶顶喷气扩稳数值研究

为进一步提高低反力度压气机的稳定工作范围，以某三级低反力度高负荷压气机首级跨声速转子为研究对象，借助三维数值模拟方法，进行了叶顶喷气扩稳研究，分析讨论了叶顶喷气提升低反力度压气机转子稳定性的机理，并探讨了不同喷气轴向位置对扩稳效果及气动性能的影响。结果表明：叶顶喷气通过削弱叶顶泄漏涡和通道激波的相互作用，抑制了转子近失速工况下泄漏涡的破碎，消除了叶顶通道的大面积堵塞，拓宽了转子的稳定工作边界；随着喷嘴的位置从叶顶前缘处沿轴向上游移动，转子的失速裕度提升量呈现出先增大后减小的趋势，综合扩稳效果和对压气机总性能参数的影响，最佳喷气轴向位置为叶顶前缘上游转子5%叶顶轴向弦长处；叶顶喷气改变了转子气动参数的径向分布，降低了转子上15%叶高范围内的负荷，同时也使得其它叶高区域的负荷提升。