BPM授时信号传输损耗的仿真建模

为了适应BPM发播系统升级改造,需要远场监测BPM授时信号的场强,因此有必要研究短波信道传输损耗,建立适当的计算模型。通过分析现有传输损耗理论模型,综合考虑地波、天波对BPM授时信号传输损耗的影响,在Labwindows/CVI开发环境下设计了BPM授时信号场强预测软件。通过将预测值与实测值比较,表明了该软件的可行性和准确性,可用于BPM授时信号场强的远场监测。     

Design of face-hobbed spiral bevel gears with reduced maximum tooth contact pressure and transmission errors

The aim of this study is to define optimal tooth modifications, introduced by appropriately chosen head-cutter geometry and machine tool setting, to simultaneously minimize tooth contact pressure and angular displacement error of the driven gear (transmission error) of face-hobbed spiral bevel gears. As a result of these modifications, the gear pair becomes mismatched, and a point contact replaces the theoretical line contact. In the applied loaded tooth contact analysis it is assumed that the point contact under load is spreading over a surface along the whole or part of the ’’potential’’ contact line. A computer program was developed to implement the formulation provided above. By using this program the influence of tooth modifications introduced by the variation in machine tool settings and in head cutter data on load and pressure distributions, transmission errors, and fillet stresses is investigated and discussed. The correlation between the ease-off obtained by pinion tooth modifications and the corresponding tooth contact pressure distribution is investigated and the obtained results are presented.     

弹载遥测传输设备回顾与展望

分三个阶段对北京遥测技术研究所弹箭遥测传输设备五十年来的发展历程作了简要回顾,阐述了遥测传输设备在不同时期的技术应用与发展,总结现阶段遥测传输设备的技术状况,并提出未来几年弹载遥测的发展方向及需要解决的问题。     

CFCC的几种声学参量表征方法比较

化学气相渗透(CVI)制备的CFCC的质量控制非常困难。研究该材料质量的无损检测方法对材料使用及性能表征等都具有重要意义。针对声衰减严重的问题,采用穿透法测量各声学参量,用声速、衰减、非线性等相关参量评价材料的均匀性,同时用金相法进行对比测试。结果表明:声速、衰减、非线性等参量可准确地评价材料均匀性,其中声速评价是最成熟的表征方法。     

Preparation of bimodal grain size 7075 aviation aluminum alloys and their corrosion properties

The bimodal grain size metals show improved strength and ductility compared to traditional metals; however, their corrosion properties are unknown. In order to evaluate the corrosion properties of these metals, the bimodal grain size 7075 aviation aluminum alloys containing different ratios of coarse(100 μm in diameter) and fine(10 μm in diameter) grains were prepared by spark plasma sintering(SPS). The effects of grain size as well as the mixture degree of coarse and fine grains on general corrosion were estimated by immersion tests, electrochemical measurements and complementary techniques such as scanning electron microscope(SEM) and transmission electron microscope-energy disperse spectroscopy(TEM-EDS). The results show that, compared to fine grains, the coarse grains have a faster dissolution rate in acidic NaCl solution due to the bigger size,higher alloying elements content and larger area fraction of second phases in them. In coarse grains,the hydrogen ions have a faster reduction rate on cathodic second phases, therefore promoting the corrosion propagation. The mixture of coarse and fine grains also increases the electrochemical heterogeneity of alloys in micro-scale, and thus the increased mixture degree of these grains in metal matrix accelerates the corrosion rate of alloys in acidic NaCl solution.     

以中继卫星系统为骨干的空间传输网络体系

空间传输网络作为重要的空间基础设施,其作用得到了国际学术界、产业界和各国政府的高度重视,已成为全球范围的研究热点。针对空间信息传输需求特点和空间传输网络的典型特征,提出了以中继卫星系统为骨干构建我国空间传输网络的设想,设计了"骨干+区域接入"的双层体系架构,"管理+数传"的骨干网络双网功能结构,梳理了空间传输骨干网络需要重点研究的理论问题和关键技术。     

一种可控透波材料电磁性能分析

采用多次化学切换手段考察了一种可控透波材料在不同次数切换前后的透波性能、屏蔽性能、切换时间、表面形貌。结果表明:切换次数10次以内,6~18 GHz材料透波状态透波率随切换次数变化较小,透波态透波率均大于90%,但材料屏蔽状态屏蔽性能增强,屏蔽态反射率均大于44%,透波/屏蔽切换时间变长,屏蔽态到透波态切换时间均在10 s内,透波态到屏蔽态切换时间均在30 s内,表面有氯化铵生成。     

非线性因素耦合下电动作动器的 动力学建模与仿真研究

针对飞行器半实物仿真领域对电动作动器高精度建模的需求,对电动作动器的各分系统分别进行动力学方程描述,建立了含间隙、刚度和摩擦等非线性因素的完整电动作动器模型。通过对比模型仿真与实测结果,表明所建分系统的动力学方程是合理正确的。建立的模型对于指导作动器的设计和优化均具有较大的参考价值。     

PC机与数控机床的通讯方法

随着CAD/CAM技术的兴起,传统手工数控程序编制已经被图形交互式的CAM系统所代替.程序编制成功后可以利用WINDOWS通信终端将程序传输至数控机床.     

时域门技术在传输/反射法介质电磁参数测量中的应用

在传输/反射法测量电磁参数的基础上,分析了传统的传输/反射法在电介质微波电磁参数计算中的局限性,采用时域门技术,测试了空气、聚乙烯石蜡和BaM型铁氧体等材料的电磁参数。结果显示时域门技术可显著提高材料的测量精度和稳定性。