不同型线结构船艏表面压力特性对比实验研究

为优选船艏结构型线方案,在风洞中针对三个在结构型线上仅有细微差别的船艏方案进行表面压力特性对比测试。实验获得了各型线方案模型表面压力空间分布特性和压力脉动特性,并通过表面压力特性的综合对比进行了结构型线评估,为船艏的结构型线设计提供直接的技术依据。     

A novel approach for predicting inlet pressure of aircraft hydraulic pumps under transient conditions

Cavitation caused by insufficient suction is a major factor that influences the life of aircraft pumps. Currently, pressurizing the tank can solve the cavitation problem under steady large-flow conditions. However, this method is not always effective under transient conditions (from zero flow to full flow in a very short time). Moreover, to apply and design other measures, such as a boost impeller, the suction dynamics during the transient period must be investigated. In this paper, a novel approach based on the pressure wave propagation theory is proposed for predicting the inlet pressure of an aircraft pump under transient conditions. First, a dynamic model of a typical aircraft pump is established in the form of differential equations. Then, the transient flow model of the inlet line is described using momentum and continuity equations, and the governing equations are discretized by the method of characteristics and the finite difference method. The simulated results are in good agreement with the results from verification tests. Further simulation analysis indicates that the wave velocity and transient time may influence the inlet and reservoir pressure as well as the size of the inlet line. Finally, solutions for upgrading the inlet pressure are discussed. These solutions provide guidelines for designing inlet installations.     

飞行中大气瞬时温度的获取

根据＊＊飞机上，ＣＷ－１００２和Ⅱ－５的试飞结果，对两种产品的性能做了对比分析；对飞行中大气温度的获取方法提出了的新意见。     

Hypothesis-test-based landcover change detection using multi-temporal satellite images – A comparative study

Remote sensing images and technologies have been widely applied to environmental monitoring, in particular landuse/landcover classification and change detection. However, the uncertainties involved in such applications have not been fully addressed. In this paper two hypothesis-test-based change detection methods, namely the bivariate joint distribution method and the conditional distribution method, are proposed to tackle the uncertainties in change detection by making decisions based on the desired level of significance. Both methods require a data set of class-dependent no-change pixels to form the basis for class-dependent hypothesis test. Using an exemplar study area in central Taiwan, performance of the proposed methods are shown to be significantly superior to two other commonly applied methods (the post-classification comparison and the image differencing methods) in terms of the overall change detection accuracies. The conditional distribution method takes into consideration the correlation between digital numbers of the pre- and post-images and the effect of the known pre-image digital number on the range of the post-image digital number, and therefore yields the highest change detection accuracy. It is also demonstrated that the class-dependent change detection is crucial for accurate landuse/landcover change detection.     

装备复杂电磁环境适应性试验问题探讨

从环境适应性概念入手,提出装备复杂电磁环境适应能力总体需求及适应性试验的基本构成,指出装备复杂电磁环境适应性试验应该具体涵盖雷电类、静电类、电磁兼容类、电子对抗类、强电磁脉冲类等五类试验内容。同时阐述了国内外在适应性试验研究方面的发展现状和遇到的挑战,为后续研究提供重要参考。     

80x86汇编语言安全性编码规则检查工具的设计与实现

从安全性角度提出80x86汇编语言程序的编码规则.通过分析航天型号典型案例.依据型号软件的应用特点,从代码结构、指令使用、中断控制、算法设计等角度对安全性编码规则进行分类,提出具体要求.设计了对应规则的检查方法和检查工具,采用静态分析方法,从软件源代码中提取安全性规则的相关元素,判断代码与规则的符合性,实现规则自动检查.     

M数缩尺法旋翼颤振动力相似模型设计

本文以延-2复合材料桨叶旋翼为例,用M数缩尺法尝试设计了缩尺比为1/5的颤振相似模型。设计从旋翼颤振微分方程开始,应用π定理得出10个独立相似准则数,列出各有关物理量缩尺因子后进行模型结构设计,从而得出了若干有益的结论。     

对广东计量检测市场的考察与思考

通过对广东省计量校准机构的考察，从市场观念、管理运行机制、高质量的综合服务、高效率、高效益等方面做了深入的分析与思考，总结出广东同行走在全国前列的原因和成功的经验，同时也指出我们的差距和在市场经济竞争中潜在的生存危险。     

C919飞机全机静力试验技术

介绍了C919大型客机全机静力试验的目的及任务需求，分析了试验特点和难点。从试验飞机支持、试验加载及控制、试验测量及监控、损伤检测及状态监测等方面制定了总体技术实现方案，验证结果表明试验系统可靠，技术实现方案满足任务要求。试验中采用了多项创新技术：试验综合加载平台设计技术优化了多系统集成，加快了试验准备速度，降低了试验准备风险；约束点误差转移控制技术将约束部位误差转移至非重点考核部位，提高了关键考核区域试验精度；机身双层地板双向加载技术优化了机身加载及扣重设计，改善了局部载荷的加载精度。技术成果为后续型号试验提供了较高参考价值。     

基于BMU/LVDS总线的闭环总检查测试技术研究

为了更好地满足控制系统总检查测试的有效性和覆盖性要求,本文提出了火箭控制系统总检查的闭环测试方案。同时,新一代运载火箭所采用的总线监控单元BMU和箭地高速串行总线LVDS等新技术使方案的实现成为了可能。本文先介绍和论述了方案提出的必要性、原理以及实现的技术支持;接着提出了几点闭环实现的设计思路;最后在某型号火箭控制系统综合实验的基础上搭建了闭环测试平台,对惯组的有效性以及迭代制导算法的适应性进行了系统级的验证,实验表明方案能够很好地满足地面测试的有效性和覆盖性。