斜爆震发动机研究进展与技术挑战

斜爆震发动机（Oblique detonation engine, ODE）采用驻定斜爆震波（Oblique detonation wave, ODW）实现高超声速气流中燃料化学能向推进系统机械能的高效转化，可大幅提升吸气式飞行速域上限，具有重要发展潜力和应用价值。本文从早、中、近期3个阶段概述ODE发展历程，总结当下斜爆震燃烧及发动机的研究现状。重点从发动机设计角度综述国内外在斜爆震燃烧组织、燃料喷注掺混以及总体性能与内流设计3方面的研究进展。深入分析了总体约束下的内外流一体化设计、高超声速气流中的燃料喷注掺混、复杂来流条件下的稳定燃烧组织、高热载荷防护以及超高速工况试验条件5大技术挑战及重点关注方向，为后续深入技术攻关及应用提供参考。     

Numerical investigation of effect of a centrifugal boost impeller on suction performance of an aircraft hydraulic pump

An integrated boost impeller can effectively improve the suction performance of an aircraft hydraulic pump (AHP). It must be designed very carefully; however, few studies thus far have investigated boost impellers. To explore the effect of the boost impeller, this study developed a three-dimensional computational fluid dynamics (CFD) model for an AHP based on the k-ε turbulence model and full cavitation model. The results of verification tests demonstrated that the model is reliable for simulating the delivery characteristics of piston pumps and the boost capacity of the inlet impeller. Steady-state simulations reveal that the boost impeller can remarkably improve the suction performance and mitigate the cavitation damage due to insufficient fluid filling while only consuming a small proportion of the total input power. Transient-state simulations show that the pump with an impeller is more capable of catching up with a sudden increase in flow demand, and it has a lower suction flow ripple and impact. However, such a boost impeller also has some limitations such as magnifying the suction pressure fluctuation and having little effect on mitigating the cavitation caused by the back-flow jet.     

船用大功率柴油机瞬态工况油气响应及燃烧特性研究

针对船用大功率柴油机瞬态性能提升的需求，开展了增压中冷船用大功率柴油机瞬态工况动态响应及燃烧特性实验研究。研究表明，涡轮增压器惯性导致的进气滞后是柴油机瞬态工况下性能恶化的主要原因；突加载工况下，进气量响应滞后供油量响应4~5个工作循环，且进气量响应速度随初始负荷增加而增加，指示平均有效压力（Indicated Mean Effective Pressure，IMEP）等燃烧特征参数加载过程中响应速度较快，波动较小；缸内燃烧过程恶化，燃烧重心和燃烧终点较同负荷下稳态工况值均推迟。     

Control of squealer-tip leakage flow with perforated-rib coolant injection in an axial turbine cascade

A novel perforated-rib configuration is proposed for controlling the tip leakage flow at the rotor tip of an axial turbine. Three perforated-rib layouts are considered, wherein a perforated rib is installed at (A) the Suction-Side squealer (SS-rib), (B) the Pressure-Side squealer (PS-rib), and (C) the additional squealer along the blade Camber Line (CL-rib). A numerical method is used to show how the novel rib layouts affect the aerodynamic performance of the tip leakage flow. Results show that the coolant jets issuing from the perforated-rib injection holes penetrate deeper into the tip clearance than those in the baseline squealer-tip case, and how the perforated-rib coolant injection affects the tip leakage flow depends strongly on the rib layout. The PS-rib and CL-rib layouts appear promising for controlling the tip leakage flow, playing a significant role in reducing the total pressure loss and improving the turbine blade’s isentropic efficiency. In particular, under an injection mass flow ratio of 1% and a tip clearance of 1% blade span, the PS-rib layout reduces the leakage mass flow rate by 27% and increases the isentropic efficiency by 1.25% compared with those in the baseline squealer-tip case. Meanwhile, the advantages of the PS-rib layout in tip leakage control are confirmed under small and large tip clearances.     

故障注入技术在飞行器非电系统中的应用进展

故障注入是一种基于试验的测评方法，是飞行器综合健康管理的重要组成部分，在提高飞行器的安全性方面具有重要作用。本文介绍了故障注入技术的基本原理，详细阐述了故障注入的各种实现方法在飞行器中的应用现状，重点分析了故障注入技术在飞行器结构、防热、液压、机械等非电系统应用中的关键技术以及存在的技术难点，并展望了该领域的发展。     

复合叶片对小流量工况下燃油离心泵非定常特性的影响

为了研究长中短复合叶片对小流量工况下燃油离心泵非定常特性的影响规律,基于CFD技术对某型燃油离心泵进行了非定常数值模拟。首先,分别建立原型方案和带有长中短复合叶片的优化方案的离心泵三维模型和网格模型。其次,基于RNG k-ε湍流模型,对两个方案中泵内流动非定常特性进行数值计算。仿真结果表明：长中短复合叶片减弱了叶轮流道内的大尺度漩涡,降低了叶轮的出口滑移,使得压力分布更加均匀。同时,叶轮与隔舌的动静干涉造成了蜗壳内一定程度的压力脉动产生,且长中短复合叶片相对较低。另一方面,小流量工况下,优化方案中离心泵的扬程为1826m,效率为26.9%,比原型方案中离心泵的扬程和效率分别提高了3.6%和2.6%。     

Adaptive feedback control of stability in an axial compressor with circumferential inlet distortion

The adaptive feedback control of stability with circumferential inlet distortion has been experimentally investigated in a low-speed, axial compressor. The flat-baffles with different span heights are used to simulate different distorted inflow cases. Compared with auto-correlation and root-mean-square analysis, cross-correlation analysis used to predict early stall warning does not depend on the distortion position. Hence, the cross-correlation coefficient was used to monitor the stable status of the compressor and provide the feedback signal in the active control strategy when suffering from different distortions. Based on the stall margin improvement of tip air injection obtained under different distorted inflow cases and the sensitivity analysis of cross-correlation coefficients to injected momentum ratios, tip air injection was adopted as the actuator for adaptive feedback control. The digital signal processing controller was designed and applied to achieve adaptive feedback control in distorted inflow conditions. The results show that the adaptive feedback control of air injection nearly achieves the same stall margin improvement as steady air injection under different distortion intensities with a reduced injection mass flow. Thus, the proposed adaptive feedback control method is ideal for the engine operation with circumferential distorted inflow, which frequently occurs in flight.     

A numerical study of segmented cooling-stream injection in supersonic film cooling

The present study proposes a segmented cooling-stream injection structure based on a certain coolant mass flow rate, and numerically investigates the effect of segmented cooling-stream injection on supersonic film cooling. The results indicate that without shock-wave impingement and with helium as the coolant, segmented cooling-stream injection can reduce the mixing between the mainstream and the cooling stream to produce better cooling performance than single injection, especially at larger coo...     

低反力度跨声速转子的叶顶喷气扩稳数值研究

为进一步提高低反力度压气机的稳定工作范围，以某三级低反力度高负荷压气机首级跨声速转子为研究对象，借助三维数值模拟方法，进行了叶顶喷气扩稳研究，分析讨论了叶顶喷气提升低反力度压气机转子稳定性的机理，并探讨了不同喷气轴向位置对扩稳效果及气动性能的影响。结果表明：叶顶喷气通过削弱叶顶泄漏涡和通道激波的相互作用，抑制了转子近失速工况下泄漏涡的破碎，消除了叶顶通道的大面积堵塞，拓宽了转子的稳定工作边界；随着喷嘴的位置从叶顶前缘处沿轴向上游移动，转子的失速裕度提升量呈现出先增大后减小的趋势，综合扩稳效果和对压气机总性能参数的影响，最佳喷气轴向位置为叶顶前缘上游转子5%叶顶轴向弦长处；叶顶喷气改变了转子气动参数的径向分布，降低了转子上15%叶高范围内的负荷，同时也使得其它叶高区域的负荷提升。