Gray bootstrap method for estimating frequency-varying random vibration signals with small samples

During environment testing, the estimation of random vibration signals （RVS） is an important technique for the airborne platform safety and reliability. However, the available meth- ods including extreme value envelope method （EVEM）, statistical tolerances method （STM） and improved statistical tolerance method （ISTM） require large samples and typical probability distri- bution. Moreover, the frequency-varying characteristic of RVS is usually not taken into account. Gray bootstrap method （GBM） is proposed to solve the problem of estimating frequency-varying RVS with small samples. Firstly, the estimated indexes are obtained including the estimated inter- val, the estimated uncertainty, the estimated value, the estimated error and estimated reliability. In addition, GBM is applied to estimating the single flight testing of certain aircraft. At last, in order to evaluate the estimated performance, GBM is compared with bootstrap method （BM） and gray method （GM） in testing analysis. The result shows that GBM has superiority for estimating dynamic signals with small samples and estimated reliability is proved to be 100% at the given confidence level.     

Transient simulation of regression rate on thrust regulation process in hybrid rocket motor

The main goal of this paper is to study the characteristics of regression rate of solid grain during thrust regulation process. For this purpose, an unsteady numerical model of regression rate is established. Gas–solid coupling is considered between the solid grain surface and combustion gas.Dynamic mesh is used to simulate the regression process of the solid fuel surface. Based on this model, numerical simulations on a H2O2/HTPB(hydroxyl-terminated polybutadiene) hybrid motor have been performed in the flow control process. The simulation results show that under the step change of the oxidizer mass flow rate condition, the regression rate cannot reach a stable value instantly because the flow field requires a short time period to adjust. The regression rate increases with the linear gain of oxidizer mass flow rate, and has a higher slope than the relative inlet function of oxidizer flow rate. A shorter regulation time can cause a higher regression rate during regulation process. The results also show that transient calculation can better simulate the instantaneous regression rate in the operation process.     

S形蒙皮零件成形工艺

通过运用S3F软件对S形蒙皮拉形过程进行模拟仿真分析,评估S蒙皮拉形工艺性;预测拉形过程中将产生的缺陷;制定合理工艺方案;优化零件设计和模具结构;实现了该蒙皮零件在数控蒙皮拉伸机上的拉形。     

舰载机惯导动基座传递对准基准系统技术研究

根据舰载机惯导动基座高精度对准的需求,从系统顶层设计的角度,引入数字停机位空间坐标系概念,建立了舰载机惯导动基座传递对准的基准。在此基础上,分析了杆臂效应和船体挠曲变形对基准精度的影响,并给出了相应的处理模型和方法。舰载机可直接引入该基准坐标系下的导航信息进行对准,无须关注舰船性能参数和主导航安装位置等,有利于减少惯导动基座对准技术难度,提高对准效率。     

可形变人脸模型研究进展综述

正确理解和跟踪人脸是构建能够在复杂人类环境中自主工作的智能机器系统的首要和关键步骤，可形变模型通过统计学习方法给出对象形状的紧凑数学表示，是达成这一目标的重要手段。从机器学习和计算机视觉领域角度，对人脸图像的可形变模型构建这一研究课题的最新研究进展进行了综述。特别地，对其中涉及的关键问题进行了归纳，并建立了一个抽象的统一贝叶斯可形变模型；在此框架下，对标准的点分布模型PDM模型及其最新研究进展进行了回顾、对一些主要的方法进行了介绍、对这些方法优缺点进行了对比分析。     

CCD信号采样位置选取方法的研究

针对CCD输出信号中的复位噪声,文章介绍了处理复位噪声较为常用的方法--相关双采样技术,并对相关双采样技术中采样位置选取的方法进行分析和研究,最后进行了实验验证.结果表明:用文中方法选取的采样位置进行相关双采样,可以较好的减小CCD输出信号中复位噪声的影响,提高信噪比.     

面向飞机维修过程的数字支援系统研究

在研究欧盟的民用飞机维修方式研究计划(TATEM)的基础上,分析飞机维修过程的主要因素并建立了飞机维修过程的数学模型。通过模糊数学知识实现对数字支援系统拟采用的技术手段对飞机维修工程促进作用的评价,详细设计了数字支援系统的主要功能模块,并用于指导系统软件的开发。面向飞机维修过程的数字支援系统的研究与开发对于其他复杂设备的维修过程数字化建设有着重要的借鉴意义。     

Training effectiveness evaluation of helicopter emergency relief based on virtual simulation

Helicopters are playing an increasingly important part in emergency relief, such as earthquake rescue, firefighting and medical transport. With the development of virtual simulation technology, virtual simulation-based training is widely used in the training of the helicopter crew especially for the dangerous and costly missions mentioned above. A complete training effectiveness evaluation method is proposed to evaluate the trainees’ training effect based on virtual simulation in this paper. A key to this method is regarding the complicated process as a discrete event-activity flow system and establishing the evaluation indicator system. Then expert group and Analytical Network Process (ANP) are applied to determine the weight of indicators. When the training data are processed, there is a novel attempt to apply Fuzzy Comprehensive Evaluation (FCE) model to calculate the two categories of indicators. Eventually, an experiment and the analysis were carried out to validate the evaluation method.     

精密复杂零件的工艺设计过程分析

针对航天控制产品精密复杂零件的工艺难点,以该类零件的工艺设计过程为主线,分别论述了材料定额编制、工艺路线设计以及工序设计过程中的注意事项和工艺方案设计方法,并以实例进行了简要说明。     

三维编织复合材料及其RTM成型工艺

文章阐述了三维编织工艺,并将三维编织复合材料的性能与传统铺层复合材料的性能作了比较。同时,还介绍了其成型方法—RTM工艺的原理及特点,并提供了一种适于RTM工艺的树脂体系。