舱段结构热振耦合环境下仿真分析

针对武器装备对环境适应性要求不断提高的现状,以某舱段结构为研究对象,基于高加速应力筛选试验(HASS)条件,研究了结构在温变-振动耦合环境下的失效机理。首先,结合HASS试验剖面,确定了载荷条件,建立有限元模型;其次,采用ANSYS Workbench软件分析得到结构温度场分布及应力响应,确定了结构危险位置,并对其疲劳寿命进行计算分析,为舱段结构的失效分析及HASS试验剖面的合理制定提供依据和指导。     

Hypersonic reentry trajectory planning by using hybrid fractional-order particle swarm optimization and gravitational search algorithm

This paper proposes a novel hybrid algorithm called Fractional-order Particle Swarm optimization Gravitational Search Algorithm (FPSOGSA) and applies it to the trajectory planning of the hypersonic lifting reentry flight vehicles. The proposed method is used to calculate the control profiles to achieve the two objectives, namely a smoother trajectory and enforcement of the path constraints with terminal accuracy. The smoothness of the trajectory is achieved by scheduling the bank angle with the aid of a modified scheme known as a Quasi-Equilibrium Glide (QEG) scheme. The aerodynamic load factor and the dynamic pressure path constraints are enforced by further planning of the bank angle with the help of a constraint enforcement scheme. The maximum heating rate path constraint is enforced through the angle of attack parameterization. The Common Aero Vehicle (CAV) flight vehicle is used for the simulation purpose to test and compare the proposed method with that of the standard Particle Swarm Optimization (PSO) method and the standard Gravitational Search Algorithm (GSA). The simulation results confirm the efficiency of the proposed FPSOGSA method over the standard PSO and the GSA methods by showing its better convergence and computation efficiency.     

谐振式光纤陀螺系统建模及其应用研究

谐振式光纤陀螺作为高精度角速度传感器,以其集成化高、成本低以及抗干扰性强等独有优势,逐渐成为下一代光学陀螺研究发展的热点。通过对谐振式光纤陀螺工作原理的分析,建立了陀螺数字信号处理系统可视化模型,并对系统谐振曲线和同步解调曲线等开环输出以及锁频反馈下闭环输出进行了模拟仿真。利用仿真模型分析了正弦波调制下谐振谱分裂现象,并搭建实验装置对其进行了验证。结果表明,实验中正弦信号调制频率高于系统谐振输出半高全宽一半,即对应2 MHz时,谐振谱分裂会导致同步解调输出线性区域出现明显失真,严重恶化了标度因数线性度。因此,搭建的谐振式光纤陀螺仿真模型能够准确而有效地模拟系统的工作状态,在系统噪声抑制和精度提升方面具有指导性意义。     

含滑行时间约束的真空段弹道设计研究

由于动力系统及测控资源的约束,工程中存在着末级两次点火但滑行时间受限的运载火箭真空段弹道设计问题。基于线性引力场的假设,引入含滑行时间约束的切换条件,从而将含固定滑行时长的弹道优化问题转换成对两点边值问题的迭代求解和对运动方程的积分,并通过多个算例仿真验证了该方法的正确性和有效性。同时,研究了迭代过程中滑行段不同弹道预报方法对弹道设计的影响,结果显示较高的预报精度可以获得更优的弹道设计结果。该方法提供了一种新的弹道设计思路,在总体方案论证或初步设计阶段可以替代传统设计方法,以有效提升弹道设计效率,优化火箭方案。     

叶片磨抛机器人力/位混合控制的设计与实现

为提高航空类发动机叶片的自动化磨抛精度,减小复杂曲面叶片加工轨迹控制误差,采用基于六维力传感器的机器人力/位混合控制策略,实现机器人磨抛轨迹的在线修正。搭建以Staubli机器人和ATI六维力传感器为核心部件的叶片磨抛验证平台,通过C++开发上位机,采集磨抛过程中六维力传感器信息并进行Kalman滤波。通过示教确定机器人运动轨迹,对机器人运动轨迹与力传感器信息进行采集分析,确定基于力/位混合控制可以实现机器人运动轨迹的在线修正,为复杂曲面的叶片磨抛轨迹控制提供一种解决方案。     

基于不确定性的飞行器分离可靠性建模与分析方法

为实现飞行器分离任务可靠性的定量分析和高效精确评估,研究了高超声速飞行器分离任务过程中各种不确定性因素对分离可靠性的影响,提出一种基于不确定性的飞行器分离可靠性建模与分析方法。面向高超声速飞行器分离任务需求,建立分离动力学仿真模型,综合考虑分离过程不确定性因素的影响,利用灵敏度分析方法识别主要不确定性因素,构建分离可靠性模型。针对此模型,提出一种改进主动学习Kriging(IAK)的分离可靠性分析方法,通过新的采样策略选取失效概率更大的采样点作为新增训练点,进行高效可靠性分析。实例结果表明,该方法能够准确描述不确定性因素对分离过程的影响,提升分离可靠性定量分析的精度和效率,为飞行器分离方案的精细化设计提供支撑。     

谱估计理论在弹道数据参数化建模中的应用

针对高超声速飞行器防御作战中目标运动规律的描述问题,提出一种基于经典和现代谱估计理论的弹道数据参数化分析和建模方法。该方法将弹道数据视作非平稳随机信号,研究其变化规律：首先,通过线性消势法消除信号的线性趋势,将其转变为平稳信号,以便于进行谱估计;然后,采用Welch算法给出大致的谱图,结合该谱图和改进的协方差法确定自回归参数模型的阶数,以避免模型阶数选择准则引起的不确定性问题;最终,给出弹道数据的参数化模型。仿真结果表明,使用本文算法建立的弹道数据参数化模型与动力学模型具有较高的一 致性。     

Behavior and functional modeling methods of doubly salient electromagnetic generators for aircraft electrical power system applications

The Doubly Salient Electromagnetic Generator(DSEG) is a promising candidate in aircraft generator application due to the simplicity, robustness and reliability. However, the field windings and the armature windings are strongly coupled, which makes the inductance characteristics non-linear and too complex to model. The complex model with low precision also leads to difficulties in modeling and analysis of the entire aircraft Electrical Power System(EPS). A behavior level modeling method based on modified inductance Support Vector Machine(SVM) is proposed. The Finite Element Analysis(FEA) inductance data are modified based on the experiment results to improve the precision. A functional level modeling method based on input–output characteristics SVM is also proposed. The two modeling methods are applied to a 9 kW DSEG prototype. The steady state and transient process precision of the proposed methods are proved by comparing with the experiment results. Meanwhile, the modeling time consumption, the application time consumption and the calculation resource demand are compared. The DSEG behavior and functional modeling methods provide precious results with high efficiency, which accelerates theoretical analysis and expands the application foreground of the DSEG in the aircraft EPS.     

High-fidelity trajectory optimization for aeroassisted vehicles using variable order pseudospectral method

In this study, the problem of time-optimal reconnaissance trajectory design for the aeroassisted vehicle is considered. Different from most works reported previously, we explore the feasibility of applying a high-order aeroassisted vehicle dynamic model to plan the optimal flight trajectory such that the gap between the simulated model and the real system can be narrowed. A highly-constrained optimal control model containing six-degree-of-freedom vehicle dynamics is established. To solve the formulated high-order trajectory planning model, a pipelined optimization strategy is illustrated. This approach is based on the variable order Radau pseudospectral method, indicating that the mesh grid used for discretizing the continuous system experiences several adaption iterations. Utilization of such a strategy can potentially smooth the flight trajectory and improve the algorithm convergence ability. Numerical simulations are reported to demonstrate some key features of the optimized flight trajectory. A number of comparative studies are also provided to verify the effectiveness of the applied method as well as the high-order trajectory planning model.     

飞行模拟器中的虚拟声音建模与实时渲染技术

虚拟声音的建模与渲染是飞行模拟器虚拟环境仿真中的关键技术,结合物理、心理、建筑、室内声学以及数字音响艺术等多门学科,提出适用于分布式飞行模拟器虚拟仿真系统的离线综合声音建模与动态均衡渲染算法,经过数字压限器、扩展器以及激励器等环节,将大规模音频数据根据虚拟权重进行离线重构;运用五段等响折线法,并结合心理声学构建了基于大规模音源的动态压缩比算法;结合座舱虚拟环境的等效吸声系数算法和混响时间算法;综合功率谱密度函数与特性共振峰,总结出与一系列状态量对应的幅频特性,应用前馈(BP)网络算法对数字均衡器进行实时调参,实现了发动机推力噪声的动态数字音频实时渲染;并基于Direct Sound的音频特效程序接口开发了一套基于高层体系结构(HLA)的分布式飞行模拟器实时音效系统,仿真结果验证了声音建模与渲染算法的有效性。