Downsizing an orbital space robot: A dynamic system based evaluation

Small space robots have the potential to revolutionise space exploration by facilitating the on-orbit assembly of infrastructure, in shorter time scales, at reduced costs. Their commercial appeal will be further improved if such a system is also capable of performing on-orbit servicing missions, in line with the current drive to limit space debris and prolong the lifetime of satellites already in orbit. Whilst there have been a limited number of successful demonstrations of technologies capable of these on-orbit operations, the systems remain large and bespoke. The recent surge in small satellite technologies is changing the economics of space and in the near future, downsizing a space robot might become be a viable option with a host of benefits. This industry wide shift means some of the technologies for use with a downsized space robot, such as power and communication subsystems, now exist. However, there are still dynamic and control issues that need to be overcome before a downsized space robot can be capable of undertaking useful missions. This paper first outlines these issues, before analyzing the effect of downsizing a system on its operational capability. Therefore presenting the smallest controllable system such that the benefits of a small space robot can be achieved with current technologies. The sizing of the base spacecraft and manipulator are addressed here. The design presented consists of a 3 link, 6 degrees of freedom robotic manipulator mounted on a 12U form factor satellite. The feasibility of this 12U space robot was evaluated in simulation and the in-depth results presented here support the hypothesis that a small space robot is a viable solution for in-orbit operations.     

复杂电磁环境中智能决策对抗技术的应用

当前雷达技术的发展突飞猛进,复杂的电磁环境已经是战场必须面对的现实情况,提出了一种可适应战场复杂电磁环境的智能干扰技术,主要从分选、干扰策略和干扰效能评估等方面讨论了整个智能对抗干扰的原理,对战场指挥决策有一定参考价值。     

发射脉冲载波泄漏抑制研究与实现

对发射端采用双平衡正交调制器产生线性调频造成载波泄漏的原因进行了详细分析,提出了采用直接数字合成(DDS)技术产生发射端线性调频信号的实现方法,从而很好地解决了载波泄漏的问题,并给出了试验结果。     

红外光电系统TOD与MRTD测试方法的比较研究

对比了MRTD(最小可分辨温差)和TOD(三角形方向辨别)法在测试图样、观察任务、测试规程、结果处理、判断准则上的不同。通过对采样作用、动态响应、客观测量3个方面的分析,得出了TOD法在测试性能上的优势,引用国外相关单位的试验结果,说明了TOD测试的适用性。     

基于分布式数据库的遥测数据处理系统

根据导弹技术的未来发展规划以及遥测数据处理技术的发展趋势,提出如何将分布式数据库这一技术应用到靶场导弹的遥测事后数据处理中,并从各方面详述该系统的布局结构和功能设计。     

群时延特性对卫星高速数传中继系统的影响

主要关注线性和抛物线特性的群时延对高速数传系统的影响,在分析了群时延特性的概念后,设计了具有仿真要求的群时延滤波器,建立模型对系统进行了仿真,得出了线性和抛物线特性的群时延对系统接收端信噪比恶化的影响,为整个系统的均衡程度提出了指标要求和参考。     

基于姿态偏置的卫星天线方向图在轨测试实现

针对静止轨道通信卫星在轨测试期间天线方向图测试的需求,分析了天线方向图测试的方法。针对利用姿态机动进行天线方向图测试问题,给出了地面操作及操作计划制订方法,并通过工程实际验证了该方法的有效性。     

潜射导弹发射原点测量方法

潜射导弹试验发射坐标系的原点一般应取在发射时刻(弹动时刻)导弹质心位置,这就需要高精度的水下定位测量系统。本文提出在不具备水下高精度测量能力的条件下,利用水上测量手段,对发射原点进行“靠近”测量并予以修正的方法。通过计算给出发射时刻导弹质心的大地坐标,应用于潜射导弹试验中。     

一种中心型间断有限元MMALE方法

针对多介质可压缩流体动力学问题,提出了一种单元中心型二维MMALE(Multi-Material Arbitrary Lagrangian-Eulerian)方法.在拉氏步,流体力学方程组采用中心型间断有限元方法求解.对于混合网格,采用Tipton压力松弛模型更新物理量,用等参坐标法更新物质中心点坐标.界面重构采用一种...     

倾转四旋翼飞行器垂直飞行状态气动特性

综合采用基于滑移网格技术的计算流体力学(CFD)方法与悬停状态气动干扰试验方法,对倾转四旋翼(QTR)飞行器垂直飞行状态的流场进行模拟与试验,研究飞行器垂直飞行状态气动特性以及部分参数对气动特性的影响.结果表明:倾转四旋翼飞行器在垂直飞行状态,前后旋翼之间干扰不明显,但旋翼与机翼的干扰明显;旋翼旋向对旋翼与机翼的干扰不...