薄壁管轴压胀形关键工艺参数及成形极限

利用粘性介质传压,对薄壁管轴压胀形进行了研究;基于塑性理论和分散性失稳理论,推导了轴对称胀形内压力分布规律,得出了内压加载区间和轴向加载关系;建立了基于载荷控制的加载函数,提出了送料控制方法,优化了加载模式;基于集中性失稳理论,计算了胀形压力极限,建立了均匀变形极限和极限应力比的概念,形成了零件可成形性的基本判据;分析了管材成形过程中应力变化特点,揭示了管材胀形区由拉-压应力状态迅速发展到双向受拉的机理.通过实验并利用有限元方法对薄壁管轴压胀形过程进行了模拟计算和研究,验证了理论分析结果.      

后向散射辐射探测大气臭氧总量反演方法的改进

以SBDART模式作为辐射传输计算模式,在各种大气气溶胶存在的情况下利用现有的大气后向散射反演大气臭氧总量的Version7方法,模拟计算得到各种气溶胶存在时的大气臭氧总量,并分析了反演结果误差产生的原因.进一步提出根据斜气柱臭氧总量sΩ0,选择不同连续波长区间测量得到的后向散射强度来对臭氧总量的初估值Ω0进行修正的方法.将得到的结果与Version7的进行比较,证明了新方法的有效性.      

钛合金表面低氧压熔结Al-Si涂层及抗氧化能力

采用低氧压高温快速熔结技术在Ti-6Al-4V合金表面成功地制备出抗高温氧化的Al-Si熔结涂层.与Si改性渗涂层相比,这种工艺相对简单,不需要经过长时间的扩散就能形成足够厚度的Al-Si熔结涂层,省时节能,且涂层中抗氧化元素铝、硅的浓度可通过调整粉末的混合比例来进行控制.X射线检测表明涂层主要由Ti₅Si₃和TiAl₃组成.在923K空气中52h循环氧化试验结果表明:低氧压熔结Al-Si涂层在前10h的氧化过程中氧化增重较快,而在随后的氧化过程中氧化增重较为缓慢,而Si改性渗涂层在氧化过程中一直保持着较高的氧化速率.      

GNSS single frequency ionospheric range delay corrections: NeQuick data ingestion technique

A study of the performance of the NeQuick model and the Klobuchar model for GNSS single frequency range delay correction on a global scale was done using data for moderate solar activity. In this study NeQuick was used in the way intended for Galileo. This study is to assess the performance of the two models at each ionospheric geographic region during moderate solar activity as previously published studies were concentrated only on high solar activity. The results obtained showed that NeQuick outperformed Klobuchar for the whole year at the three geographical regions of the ionosphere. In terms of monthly root mean square of mismodeling, NeQuick outperformed Klobuchar by 15 TECU or more at low-latitudes, 5 TEC or more at mid-latitudes, and 1 TECU or more at high-latitudes.     

“嫦娥二号”卫星L2点角动量管理

对“嫦娥二号”(CE-2)卫星进入环绕日地拉格朗日L2点的李萨如轨道后卫星喷气卸载所产生的影响进行了研究.提出了一种利用光压力矩辅助卫星太阳电池翼角度调整进行角动量管理的方法.在轨试验表明,太阳光压强度足够对飞行在L2点环绕轨道上的CE-2卫星进行角动量管理,可以大幅度减少动量轮在轨喷气卸载的次数,有利于CE-2卫星的轨道维持.     

太阳活动与全球气候变化

太阳不断向地球辐射电磁波和粒子, 太阳辐射是地球气候系统最主要的能量来源. 地球气候系统对太阳活动的响应是一个复杂的过程, 包括辐射过程、动力学过程以及微观物理过程等. 根据太阳辐射的卫星观测结果和重建结果, 例举了古气候、温度、大气环流和云量等方面太阳影响气候的观测证据, 论述了太阳影响气候的三种可能机制, 即太阳总辐射变化可以影响地表温度, 并通过海-气耦合改变大气环流; 太阳紫外辐射通过调制平流层的温度和风场影响下面的对流层; 太阳通过行星际磁场调制银河宇宙线, 而银河宇宙线通过电离大气影响云量, 进而改变地球的能量收支.      

Relative amplitude of the total electron content variations depending on geomagnetic activity

We developed a method of estimation of a relative amplitude dI/I of the total electron content (TEC) variations in the ionosphere as deduced from the data of the global GPS receivers network. To obtain statistically significant results we picked out three latitudinal belts provided in the Internet by the maximum number of GPS sites. They are high-latitudinal belt (50–80°N, 200–300°E; 59 sites), mid latitude belt (20–50°N, 200–300°E; 817 sites), and equatorial belt (±20°N, 0–360°E; 76 sites). The results of the analysis of the diurnal and latitudinal dependencies of dI/I and dI/I distribution probability for 52 days with different levels of geomagnetic activity are presented. It was found that on average the relative amplitude of the TEC variations varies within the range 0–10% proportionally to the value of the K_p geomagnetic index. In quiet conditions the relative amplitude dI/I of the TEC variations at night significantly exceeds the daytime relative amplitude. At high levels of magnetic field disturbances, the geomagnetic control of the amplitude of TEC variations at high and middle latitudes is much more significant than the regular diurnal variations. At the equatorial belt, on average, the amplitude of TEC variations in quiet and disturbed periods almost does not differ. The obtained results may be useful for development of the theory of ionospheric irregularities.     

基于数值分析的空速-动压信息处理方法

从数值计算方法的角度对大气数据校验系统设计中空速、指示空速与动压、静压转换关系进行研究,提出了一种新的转换方法。在PC计算机和ARM嵌入式计算机S3C2410上进行了模拟仿真,给出了计算程序和分析结果,与传统方法相比,具有转换速度快、程序简捷、精度高的特点,该方法用软件容易实现,可以很方便地应用到其它传感器的研究与设计中。     

小管径冷凝管的数学模型

基于环状流流型建立了小管径冷凝管的数学模型.模型考虑了气液界面表面张力的作用,在同一横截面上气相与液相存在压力差.对两相压降的计算,考虑了气液两相间的相互作用,包括摩擦切应力和动量转移切应力.应用该模型,可考察气相与液相压降、液膜厚度、气相与液相平均速度、气液界面切应力以及管内壁换热系数等的沿程变化情况.根据模拟结果可得:两相压降沿管长呈近似线性增加;气相平均速度沿管长先增大后逐渐减小,但变化范围很小,且远大于液相平均速度;动量转移切应力随液膜厚度增加而增大,同摩擦切应力相比不可忽略;管内壁对流换热系数随液膜厚度增加而减小,由于冷凝管的管径很小,即使蒸气冷凝趋于完毕,气液界面接近冷凝管中心线,换热系数仍较大.     

HB-2 high-velocity correlation model at high angles of attack in supersonic wind tunnel tests

Responding to a need for experimental data on a standard wind tunnel model at high angles of attack in the supersonic speed range, and in the absence of suitable reference data, a series of tests of two HB-2 standard models of different sizes was performed in the T-38 trisonic wind tunnel of Vojnotehnickˇi Institut(VTI), in the Mach number range 1.5–4.0, at angles of attack up to+30°. Tests were performed at relatively high Reynolds numbers of 2.2 millions to 4.5 millions(based on model forebody diameter). Results were compared with available low angle of attack data from other facilities, and, as a good agreement was found, it was assumed that, by implication, the obtained high angle of attack results were valid as well. Therefore, the results can be used as a reference database for the HB-2 model at high angles of attack in the supersonic speed range, which was not available before. The results are presented in comparison with available reference data, but also contain data for some Mach numbers not given in other publications.