Numerical analysis of deflection control of a gas plasma jet based on magnetohydrodynamic staggered electrode configuration

To control the deflection of the gas plasma jet, a new analytical method is proposed based on the Magnetohydrodynamic(MHD) technique. Based on the typical MHD power generation model, the applied voltage is applied to the staggered electrodes, that is, a pair of electrodes on the same side wall are connected to generate an axial current in the channel. Under the action of the magnetic field perpendicular to the direction of the flow, the plasma is subjected to electromagnetic forces perpendicular...     

基于气动辅助变轨的变气动外形飞行器概念研究--最优控制律问题

从一个天地往返飞行器的上升轨道和再入返回轨道的优化，以及适用不同飞行任务的变轨要求的气动外形问题，提出一项基于气动力辅助变轨的变气动外形飞行器的新概念研究。对于一个固定气动外形飞行器要同时满足上升轨道有效载荷最大和再入轨道热流峰值、过载峰值及机动性能约束下的成本最低往往是困难的。若同时满足不同飞行任务：飞往太空站的运输任务，空间拦截和交会机动巡航任务及星际探测任务，则更为困难，实际上是不可能的。文章研究基于气动力辅助变轨，在热流约束下，气动外形参数变化对最优控制的影响。其结论为：热流约束下的最优控制解，包括考虑推力协同变轨，除了在非约束弧的滚转角不直接受气动外形影响外，其余的控制律，升力系数和滚转角都是气动外形参数和攻角的函数。因而变气动外形可作为一项新技术，即通过气动外形参数变化和相应的变轨策略而获得性能和成本都最佳的用途很广的一种新型飞行器。     

火箭多台发动机并联推力传递结构动静耦合计算方法

针对运载火箭多台发动机并联推力传递结构在工作中力学环境适应性问题,开展了动静耦合动力学计算方法研究。该研究分析了动静耦合机理,并以此为基础,计算了有无静载的结构模态频率和推力传递结构关键部位随机振动响应。结果表明,火箭推力传递结构在大推力作用下,结构的刚度发生改变,进而影响动力学特性。相关研究结果为火箭多台发动机并联推力传递结构动静联合试验提供了参考意义。     

液体火箭发动机氧腔流动分析及均流板设计研究

采用Navier-Stokes方程数值模拟了某型火箭发动机推力室氧腔流动，计算分析了节流板表面的总、静压分布及其畸变指数。依据压力畸变提出了氧腔均流孔板改进方法，并通过多次分析-设计循环得到了新的均流板。最后对所设计的均流板进行了详细地计算分析和实验验证。分析和验证表明新设计的均流板使氧腔出口节流板表面压力畸变降低了30．4％，显著提高了氧腔压力均匀性，进而可以大大提高燃烧效率。     

空空导弹的一种优化复合控制方案研究

通过研究空空导弹推力矢量和气动复合控制与一般气动控制方式，讨论了新一代近距格斗型空空导弹的一种控制模式，并参照某型导弹的数学模型及有关气动参数对两种控制方式进行了数字仿真。结果表明，在新一代格斗型空空导弹上采用复合控制方式可明显地改善导弹的总体性能。     

微射流技术的原理及其应用

介绍了微射流技术的原理及其初步应用。基于非线性系统的演化对初始条件具有敏感依赖这个事实发展起来的微射流技术，由于与常规持续喷射射流控制方式相比具有许多优点，因而在流动和换热控制应用方面取得明显的效果。并指出，随着研究工作的深入，该项技术还可望用于高马赫数飞行体表面气体流动控制、火箭发动机推力方向控制等。     

模糊自整定PID控制及其在航天产品真空热试验中的应用分析

文章首先分析了航天产品热试验时被控对象的特点,并进行了建模分析,接着介绍了如何通过参数自整定技术获得PID的3个初始参数,并进行了模糊自校正PID控制器设计。为了检验该控制方法的控制效果,文章选取了3次有代表性的试验数据进行了仿真分析。结果表明,模糊自校正PID控制方法具有适应性强、控制精度高、抑制试验系统温度滞后明显的优点,该方法较原控制方法超调量有所减小,过渡过程有所加快,抗干扰能力显著增强,较好地解决了控制系统快速性和小超调量之间的矛盾。     

吊挂系统对波瓣混合排气系统气动热力性能影响

为了明确短舱中吊挂系统的堵塞效应对波瓣混合排气系统气动热力性能的影响,采用数值模拟的方法对包含吊挂的混合排气系统进行了定量研究。研究结果表明,受吊挂系统的影响,在波瓣混合排气系统混合段内,存在着一大尺度的回流区,其作用范围随吊挂长度的增加而增加。在性能参数方面,与未考虑吊挂系统时相比,考虑吊挂之后,虽然混合排气系统出口处热混合效率以及推力系数下降很小,最大降幅仅分别为0.017和0.01,但总压恢复系数却显著下降,最大降幅达到了0.03。此外,随着吊挂系统长度的变化,排气系统出口处的热混合效率、总压恢复系数以及推力系数变化幅度小于0.01,变化很小。     

Modeling and analysis of mover gaps in tubular moving-magnet linear oscillating motors

A tubular moving-magnet linear oscillating motor (TMMLOM) has merits of high efficiency and excellent dynamic capability. To enhance the thrust performance, quasi-Halbach permanent magnet (PM) arrays are arranged on its mover in the application of a linear electro-hydrostatic actuator in more electric aircraft. The arrays are assembled by several individual segments, which lead to gaps between them inevitably. To investigate the effects of the gaps on the radial magnetic flux density and the machine thrust in this paper, an analytical model is built considering both axial and radial gaps. The model is validated by finite element simulations and experimental results. Distributions of the magnetic flux are described in condition of different sizes of radial and axial gaps. Besides, the output force is also discussed in normal and end windings. Finally, the model has demonstrated that both kinds of gaps have a negative effect on the thrust, and the linear motor is more sensitive to radial ones.     

Thrusting maneuver control of a small spacecraft via only gimbaled-thruster scheme

The thrust vector control (TVC) scheme is a powerful method in spacecraft attitude control. Since the control of a small spacecraft is being studied here, a solid rocket motor (SRM) should be used instead of a liquid propellant motor. Among the TVC methods, gimbaled-TVC as an efficient method is employed in this paper. The spacecraft structure is composed of a body and a gimbaled-SRM where common attitude control systems such as reaction control system (RCS) and spin-stabilization are not presented. A nonlinear two-body model is considered for the characterization of the gimbaled-thruster spacecraft where, the only control input is provided by a gimbal actuator. The attitude of the spacecraft is affected by a large exogenous disturbance torque which is generated by a thrust vector misalignment from the center of mass (C.M). A linear control law is designed to stabilize the spacecraft attitude while rejecting the mentioned disturbance torque. A semi-analytical formulation of the region of attraction (RoA) is developed to ensure the local stability and fast convergence of the nonlinear closed-loop system. Simulation results of the 3D maneuvers are included to show the applicability of this method for use in a small spacecraft.