基于双吸叶轮两侧非均衡进气研究轮盘凸台尺寸影响

为明确双吸叶轮两侧叶轮之间的径向轮盘凸台尺寸变化对其总体性能及内部流场的影响,探索不同尺寸轮盘结构叶轮的流动损失机理,基于双吸叶轮两侧非均衡进气条件,采用数值方法对五种径向轮盘尺寸双吸叶轮的三维粘性流场进行了模拟研究。研究结果表明:从双吸叶轮最优性能及最高流动稳定性观点出发,均要求两侧叶轮之间的径向轮盘凸台超出叶片尾缘一定范围;具体超出尺寸范围则需要通过对双吸叶轮的压比、效率性能目标进行折衷确定。径向轮盘凸台尺寸的改变明显影响双吸叶轮两侧叶轮的流量分配,进而影响扩压器内分离流动损失大小及双吸叶轮的整体性能。另外,相比于较大径向轮盘凸台,无径向轮盘凸台结构更容易造成双吸叶轮两侧叶轮流量差距悬殊。      

TBCC用轴对称进气道流量控制技术研究

为了满足组合动力进气道在宽马赫数范围内良好工作,开展了组合动力轴对称进气道设计,提出了多种轴对称进气道变几何方案以实现进气道/发动机流量匹配。理论分析及数值模拟研究了各变几何机制的可行性,对比分析各方案优劣。结果表明:外压段溢流、内压段溢流及扩压段溢流均能实现进气道/发动机流量匹配;外压段溢流变几何机制较复杂,其中改变唇罩角度和移动部分中心锥时进气道总压恢复系数较高,且移动部分中心锥时进气道压差阻力较小;内压段溢流各方案变几何机制相对简单,但溢流区域较大,斜激波易导致中心锥表面流动分离。其中采用外罩设置放气孔的形式时,进气道总压恢复系数较高,压差阻力较小;扩压段溢流方案实现简单,溢流区域小,进气道性能较好。      

Tightly combined GPS/Galileo RTK for short and long baselines: Model and performance analysis

To ensure the compatibility and interoperability with modernized GPS, Galileo satellites are capable of broadcasting navigation signals on carrier phase frequencies that overlap with GPS, i.e., GPS/Galileo L1-E1/L5-E5a. Moreover, the GPS/Galileo L2-E5b signals have different frequencies with wavelength differences smaller than 4.2?mm. Such overlapping and narrowly spaced signals between GPS and Galileo bring the opportunity to use the tightly combined double-differenced (DD) model for precise real-time kinematic (RTK) positioning, resulting in improved performance of ambiguity resolution and positioning with respect to the classical standard or loosely combined DD model. In this paper, we focus on the model and performance assessment of tightly combined GPS/Galileo L1-E1/L2-E5b/L5-E5a RTK for short and long baselines. We first investigate the tightly combined GPS/Galileo DD observational model for both short and long baselines with simultaneously considering the GPS/Galileo overlapping and non-overlapping frequencies. Particularly, we introduce a reparameterization approach to solve the rank deficiency that caused by the correlation between the DISB parameters and the DD ionospheric parameters for both overlapping and non-overlapping frequencies. Then we present performance assessment for the tightly combined GPS/Galileo RTK model with real-time estimation of the differential inter-system bias (DISB) parameters for short and long baselines in terms of ratio value, ambiguity dilution of precision (ADOP), ambiguity conditional number, decorrelation number, search count, empirical success rate, time-to-first-fix (TTFF), and positioning accuracy. Results from both static and kinematic experiments demonstrated that compared to the loosely combined model, the tightly combined model can deliver improved performance of ambiguity resolution and precise positioning with different satellite visibility. For the car-driven short baseline experiment with 10° elevation cut-off angle, the tightly combined model can not only significantly increase the ratio value by approximately 27.5% (from 16.0 to 20.4), but also reduce the ambiguity ADOP, the conditional number, and the search count in LAMBDA by approximately 22.2% (from 0.027 to 0.021 cycles), 14.9% (from 199.2 to 169.6), and 25.4% (from 150.1 to 112.0), respectively. Comparable decorrelation number, empirical success rate, and positioning accuracy are also obtained. For the car-driven long baseline experiment, it is also observed that the ambiguity resolution performance in terms of the ratio value, the decorrelation number, the condition number, and the search count are significantly improved by approximately 18.5% (from 2.7 to 3.2), 22.0% (from 0.186 to 0.227), 55.9% (from 937.6 to 413.7), and 10.3% (from 43.8 to 39.3), respectively. Moreover, comparable ADOP, empirical success rate, and positioning accuracy are obtained as well. Additionally, the TTFF can be reduced (from 54.1 to 51.8 epochs with 10° elevation cut-off angle) as well from the results of static experiments.     

主结构为回转体零件双车削中心制造单元研究

姿轨控液体火箭发动机绝大部分零件以回转体为主结构,具有多品种、变批量的生产特点.以该类零件的加工制造单元为研究对象,在分析单元要素特性要求的基础上,提出了双车削中心制造单元的建设方案,对单元的配置、工艺稳定性和柔性等三个维度的实现技术进行了研究,给出了具体的技术措施.     

热激励在超声速进气道内对激波诱导的边界层分离的控制机理

通过数值模拟的方法研究了马赫5的超声速进气道内,热激励对激波/边界层相互作用的控制机理。研究了热激励器放热功率(E)、热激励器展向放置数目(N)和热激励器到控制激波的距离(S)三个参数在超声速进气道内激波控制和边界层分离改善中的表现。分别针对以下四种条件进行了数值模拟:1)E=2k W、N=2、S=0.02m;2)E=3k W、N=2、S=0.02m;3)E=2k W、N=3、S=0.02m;4)E=2k W、N=2、S=0m。分析发现:在以上四种条件下,均可观察到热激励在控制激波和改善激波诱导边界层分离上有着显著的效果。热激励器的放热功率对激波的控制效果有着明显的影响,在本文所考虑的热激励能量范围内,放热功率越大,原激波角的改变越大,最终分离区的改变越明显;展向放置的热激励器数目N影响着输入到流场的能量密度,并且N越大,壁面附近的激波面越趋于平面。尽管N对上壁面沿展向的压力分布无明显影响,但对上壁面分离区大小有明显的影响;对比条件1和4下的计算结果,发现S=0.02m可以得到很好的控制效果,而S=0m时流场结构几乎没有变化,这就表明热激励器必须放置在控制激波上游的一定距离处才会有预期的效果。     

高马赫数超燃冲压发动机性能数值研究

考虑水平起降要求,构造了一种采用流线追踪内转式进气道、圆形截面燃烧室的双侧布局高马赫数超燃冲压发动机,设计点马赫数为7。对Ma 7~10范围内的发动机性能进行了数值模拟,给出了发动机进气道性能、整机性能,对燃烧室内的燃料掺混和燃烧情况进行了分析。此外,采用一维性能计算方法对燃烧室性能进行了预估。研究表明,此发动机性能可满足飞行器推阻匹配需求;一维性能结果与三维数值模拟的压力分布处于15%的误差范围内,可用于发动机性能的快速预估。     

低雷诺数下进气道异常起动现象及其影响因素探析

结合激波风洞实验和数值模拟分析,对一种二元混压式进气道在实验中低单位雷诺数下反而呈现出自起动特征的异常现象进行了研究。根据激波风洞的反复实验观察,表明随着来流单位雷诺数的降低,在继进气道进入不起动状态之后又会重新出现自起动特征的异常起动现象。该结果与层流模型计算得到的流场结构相符,而与湍流模拟结果差异显著;分析表明,层流情况下,由于分离区向前体压缩面大范围地延伸,缓解了进气道入口的逆压梯度,从而在喉道处可以形成主体为超声速的通畅流道,而湍流情况下,进气道入口处激波/边界层干扰形成过分集中的分离泡则呈现明显的壅塞状态;尽管层流情况下进气道流场结构呈现出较为通畅的类似起动的特征,但其流量系数仍明显低于湍流的情况。因此,实验上所观察到的这种异常起动现象严格地说并不属于真正意义上的起动状态。     

某型燃气轮机进气系统内流场的数值分析

为了揭示燃机进气系统内的流动特性,并为进气系统的性能预测、优化设计提供理论依据,以某型燃气轮机的进气系统为研究对象,基于混合网格的SIMPLE算法和标准的k-ε湍流模型,运用FLUENT软件对燃气轮机进气系统内的流场进行数值模拟,并从压力分布、气流角分布2个方面进行分析。结果表明:对气动性能产生重要影响的损失区域主要集中在进气外环上方和支板附近,蜗壳内锥的绕流分离也是损失源之一。应进行尽可能消除进气外环上方的气流分离,同时将绕流分离控制在一定范围内的优化设计和改进。     

组合发动机可调进气道气动性能

为使涡轮/冲压组合发动机能在宽广的飞行高度、速度内飞行,设计一种组合发动机可调进气道气动结构.编制带黏性修正激波系结构预估程序,实现不同来流马赫数及来流攻角下,进气道内激波系结构布置及强度预估,并指导进气道可调楔板尺寸选取.考虑进气道附面层抽吸后,对来流在马赫数为1.6～4.0范围内,-2°,0°和+2°三种攻角下进气...     

基于遗传算法的高超声速曲面压缩进气道反设计

结合计算流体力学和遗传算法,建立了一种高超声速曲面压缩进气道的反设计方法。根据压力分布反设计了压缩型面。结果表明,该曲面压力分布与目标压力分布符合良好,从而验证了反设计方法的正确性。采用此反设计方法,设计了某高超声速曲面压缩进气道,并和等熵压缩二维进气道进行了比较。研究发现,在其它性能参数几乎相等情况下,曲面压缩进气道总压恢复较等熵压缩基准进气道提高9.7%,长度缩短5.6%。吞入23mm前体附面层后,基准进气道不起动,而曲面压缩进气道总压恢复系数仅下降5.4%,表现出良好的吞附面层能力。