橡胶"O"形密封圈结构参数和失效准则研究

利用大变形、接触的非线性有限元理论建立了某固体火箭发动机密封结构的二维轴对称模型,用有限元软件计算出该结构在工作状态下的变形和应力。通过计算可知,在橡胶“O”形密封圈与上下法兰接触的位置产生最大的接触压应力,在密封槽槽口转角位置产生最大的剪切应力。对密封性能的各结构参数进行了分析,讨论了上下法兰张开间隙、初始压缩率、密封槽槽口及槽底倒角半径、密封槽宽、密封圈材料等典型参数的影响:上下法兰张开间隙、密封圈的初始压缩率对最大接触压应力的影响较大,而密封槽槽口和槽底处倒角半径对剪切应力影响明显。三维壳体结构的有限元分析结果表明,上下法兰在内压作用下产生不均匀的张开间隙,体现了三维结构的特点。不均匀的张开间隙与二维轴对称结果对比可知,以最小间隙作为设计间隙,二维轴对称分析模型可取代三维模型来分析该结构的密封性能。最后,确定了“O”形圈密封结构的最大接触应力和剪切应力失效准则。     

航天器多功能结构传热特性的实验研究

针对航天器结构高性能、轻质化和集成化的发展要求,设计了集电路控制,热管理功能和结构承载功能于一体的多功能结构。此种结构分别采用柔性电路板控制热仿真多芯片模块,作为多功能结构的热源;碳碳材料作为热倍增器;复合材料蒙皮和金属泡沫芯子的夹层结构作为承载结构,实现了结构和功能的集成。同时,为了研究多功能结构的传热特性,进行了热真空实验,实验测量了热流密度和温度梯度。结果表明这种新型的结构可以消散飞行器多芯片模块产生的热量,碳碳热倍增提供了一种减小温度梯度的新方法,同时这种多功能结构减少了结构的体积,降低了结构的质量。     

基于虚温定义的粘弹性有限元方法

基于NARAYANASWAMY提出的虚温定义,用虚温表示的温度变化产生的折算应变率替代Swanson模型中的应变率修正函数,获得了基于虚温定义的粘弹性材料的应力应变本构方程,并导出基于虚温定义的粘弹性非线性有限单元法计算公式。计算结果验证了此基于虚温定义的粘弹性分析方法的正确性。     

采用分布式压电驱动器的翼面热颤振主动抑制

高超声速气动加热会严重影响飞行器结构的颤振特性,本文开展了采用分布式压电驱动器的热颤振主动抑制方法研究。以某飞行器小展弦比翼面为研究对象,进行了常温和热载荷边界条件下的结构振动和颤振分析。在此基础上,对频域非定常气动力进行有理函数拟合,建立包含压电驱动器的翼面耦合结构系统状态空间形式的运动方程;对典型热载荷边界条件下的被控对象设计颤振主动抑制控制律,分别设计出LQG及PID控制器;对比分析了系统开、闭环颤振特性。结果表明,通过主动控制律的实施,达到了热颤振主动抑制的目的,验证了这种颤振主动抑制方法的有效性     

Three-Dimensional Stress Fields in Finite Thickness Plate with Hole Under Shear Load

The theoretical solutions are obtained for the three-dimensional(3-D)stress field in an infinite isotropic elastic plate with a through-the-thickness circular hole subjected to shear load at far field by using Kane and Mindlin′s assumption based on the stress function method.Based on the present solutions,the characteristics of 3-D stress field are analyzed and the emphasis is placed on the effects of the plate thickness and Poisson′s ratio on the deviation of the present 3-D in-plane stress from the related plane stress solutions,the stress concentration and the out-of-plane constraint.The present solutions show that the stress concentration factor reaches its peak value of about 8.9% which is higher than that of the plane stress solutions.As expected,the out-of-plane stress constraint factor can reach 1on the surface of the hole when the plate is a very thick one.     

声波激振破坏的机理及条件研究

从微观层面而言,物体在声波激励共振中发生了失效破坏,显然是因为出现了破坏物质微观粒子之间结合力的因素。在大气中运动传播的声波进入物质体后转换为应力波,这种应力波(能量)的传导、扩散和聚集交合方式会对物质微观粒子结合薄弱之处的结合力产生影响。这是因为当声波作为外激励源能量作用于物质粒子并大到一定程度时,特别是在两个纵波对撞或在变向结构交汇处出现回波激振效应时,会使粒子间出现异常的能量变化,从而破坏了粒子间相对稳定的平衡状态。如果物体中的粒子大量失衡,就会对物体产生整体结构性破坏作用,使物体结构强度下降、出现裂纹,甚至完全失效。     

Expression of estrogen receptor α in human breast cancer cells regulates mitochondrial oxidative stress under simulated microgravity

This study investigated intracellular oxidative stress and its underlying mechanisms in a rotary cell culture system used to achieve a simulated microgravity (SMG) environment. Experiments were conducted with human breast cancer cell lines MCF-7 (an estrogen receptor (ER) α positive cell line) and MDA-MB-231 (an ERα negative cell line) encapsulated in alginate/collagen carriers. After 48 h, SMG led to oxidative stress and DNA damage in the MDA-MB-231 cells but a significant increase in mitochondrial activity and minimal DNA damage in the MCF-7 cells. The activity of superoxide dismutase (SOD) significantly increased in the MCF-7 cells and decreased in MDA-MB-231 cells in the SMG environment compared with a standard gravity control. Moreover, SMG promoted expression of ERα and protein kinase C (PKC) epsilon in MCF-7 cells treated with PKC inhibitor Gö6983. Overall, exposure to SMG increased mitochondrial activity in ERα positive cells but induced cellular oxidative damage in ERα negative cells. Thus, ERα may play an important role in protecting cells from oxidative stress damage under simulated microgravity.     

李萨如图在磁记忆二维定量检测中的应用

依据磁记忆二维检测原理,将磁信号法向分量存在过零点,切向分量存在最大值联合起来检测,并引入李萨如图分析法,对用法向分量和切向分量合成的类李萨如图以及将法向分量和切向分量微分后合成的李萨如图进行比较分析,得出可以利用微分后合成的李萨如图封闭区域面积的大小来判断应力集中程度及用在不同的应力集中程度下李萨如图面积数量级作为阈值的结论.从而可为利用李萨如图分析法对磁记忆二维检测进行定量分析的进一步研究提供试验分析依据.     

低温动态准双轴拉伸加载下HTPB推进剂的热老化性能

为分析热老化后三组元端羟基聚丁二烯(HTPB)推进剂在低温动态准双轴加载下的性能，开展了不同热加速老化时间、不同温度和应变率条件下推进剂的准双轴拉伸力学性能试验及扫描电镜(SEM)观察试验。试验结果表明：热加速老化前后，推进剂的拉伸曲线趋势、力学性能变化规律及细观损伤形式保持一致，改进型非线性模型能够更好地描述1~100 s -1 应变率范围内典型力学性能参数随热老化时间的非线性变化关系。随温度降低，老化后推进剂的断面形貌由“脱湿”变为AP颗粒断裂，热老化、低温以及高应变率载荷的叠加使得推进剂的细观损伤变得更加严重，但准双轴拉伸时损伤程度相比单轴拉伸时有所减弱。热老化32 d、74 d和98 d后-50 ℃、 14.29 s -1 加载条件下的最大伸长率分别为未老化时室温、0.40 s -1 条件下数值的28.79%、27.58%和25.63%，该参数定义可为分析长期贮存后战术导弹SRM药柱在低温点火条件下结构完整性失效的准则提供数据支持。     

Lightweight structure of a phase-change thermal controller based on lattice cells manufactured by SLM

Thermal controllers equipped with phase-change materials are widely used for maintaining the moderate temperatures of various electric devices used in spacecraft. Yet, the structures of amounts of thermal controllers add up to such a large value that restricts the employment of scientific devices due to the limit of rocket capacity. A lightweight structure of phase-change thermal controllers has been one of the main focuses of spacecraft design engineering. In this work, we design a lightweight phase-change thermal controller structure based on lattice cells. The structure is manufactured entirely with AlSi10 Mg by direct metal laser melting. The dimensions of the structure are 230 mm × 170 mm × 15 mm, and the mass is 190 g, which is 60% lighter than most traditional structures(500–600 g) with the same dimensions. The 3 D-printed structure can reduce the risk of leakage at soldering manufacture by a welding process. Whether the strength of the designed structure is sufficient is determined through mechanical analysis and experiments. Thermal test results show that the thermal capacity of the lattice-based thermal controller is increased by50% compared to that of traditional controllers with the same volume.