大型齿圈加工变形与防治措施的研究

在生产中大直径薄壁结构齿圈加工变形是经常遇到的问题。本文以某产品齿圈制齿后出现严重锥度变形问题为例，分析引起变形的原因，通过反复实验，找到了避免变形的有效措施。     

基于小波倒谱模型的滤波处理技术及其在超声应力检测中的应用

在超声检测中,应力是通过超声时间延迟来测量的,而超声回波的时间延迟对噪声非常敏感。噪声严重影响应力的测量精度,噪声引起的时间延迟甚至与应力引起的时间延迟处于同一量级。而以往消噪处理都是基于盲信息,没有考虑系统响应特点,消噪效果不好,需一种有效的消噪方法。提出了一种基于倒谱模型新的滤波处理技术,从系统响应的角度,建立超声通道的小波倒谱模型,并通过对钢轨应力测试信号进行滤波处理,试验结果令人满意。     

材料非线性有限元分析的一种有效方法——预测割线刚度变刚法

 材料非线性有限元增量解法中如何减少加载次数,保证精度是两个重要的问题;而误差估计也是与之密切相关的问题,特别是对每次加载不进行迭代的增量变刚法。本文针对这些问题提出预测割线刚度变刚法。     

SiC/CVD SiC复合涂层的抗氧化及抗热震性能研究

为了提高C/SiC复合材料耐高温性能,采用泥浆浸渍裂解与真空化学气相沉积(CVD)在材料表面制备了SiC/CVD SiC复合涂层,通过XRD、SEM分析了涂层组成与结构;研究了复合涂层的高温抗氧化(700～1 500℃)和抗热震性能。结果表明,泥浆浸渍法制备的SiC涂层具有一定的封孔效果,可使材料开孔率下降,但高温抗氧化效果并不佳,1 200℃氧化10 min后材料弯曲强度保留率下降明显仅有86%。CVD SiC涂层结构致密,与SiC封孔涂层结合较好,在700～1 500℃具有较好的抗氧化效果,随着氧化温度的升高,氧化后涂层完好,表面O元素逐渐增加,材料失重率缓慢增加但不大于0.5%,且材料性能并未下降。涂层材料在1 200℃-10 min短时热震5次后材料弯曲强度保留率仍有95%以上,且未出现开裂、剥落等热震损伤。在1 200℃-30 min长时热震10次后,涂层材料基本被完全氧化,材料失去保护作用,弯曲强度下降至90%左右。     

平板表面薄圆柱绕流摩擦力矢量场全局测量

针对壁面摩擦力矢量场测量问题,基于剪切敏感液晶(SSLC)涂层技术建立了一种测量平板表面摩擦力矢量场的方法。该方法基于多视角测量原理,采用六台同步相机从不同方向同时采集SSLC涂层在摩擦力作用下的颜色变化,与采用单台相机相比能够降低测量噪声,并且具有测量非定常流动的摩擦力场的潜力。应用该方法测量了平板表面薄圆柱绕流的摩擦力矢量场,结果表明:(1)SSLC涂层能够以彩色方式定性显示壁面摩擦力信息;(2)通过对不同方向观测的SSLC涂层颜色进行分析处理,该方法能够高分辨率测量薄圆柱绕流的摩擦力矢量场,详细地捕获了流动特征;(3)同一份SSLC涂层可以重复使用并且可用于测量不同的摩擦力矢量场。     

Energy principle and material removal sequence optimization method in machining of aircraft monolithic parts

In the machining process of aircraft monolithic parts, the initial residual stress redistribution and structural stiffness evolution often lead to unexpected distortions. On the other hand, the stress redistribution and stiffness reduction during the machining process depend on the material removal sequence. The essence of the stress redistribution is releasing the initial elastic strain energy. In the present study, the influence of the material removal sequence on the energy release is studied. Moreover, a novel optimization method is proposed for the material removal sequence. In order to evaluate the performance of the proposed method, the mechanism of the machining distortion is firstly analyzed based on the energy principle. Then a calculative model for the machining distortion of long beam parts is established accordingly. Moreover, an energy parameter related to the bending distortion and the procedure of the material removal sequence optimization is defined. Finally, the bending distortion analysis and material removal sequence optimization are performed on a long beam with a Z-shaped cross-section. Furthermore, simulation and experiments are carried out. The obtained results indicate that the optimized sequence results in a low distortion fluctuation and decreases the bending distortion.     

A user-friendly yield criterion for metals exhibiting tension-compression asymmetry

The aim of this paper is to model the yielding asymmetry of pressure-insensitive metals, including but not limited to Ni₃Al alloys. The main focuses are put on the flexibility and manipulative convenience. The parameters of theory are kept to a minimum and can be determined by as few tests as possible. These requirements are fulfilled by constructing a yield function using the second and third-invariants of a linearly transformed stress tensor. The proposed yield criterion has a simple mathematical form and has only seven parameters when used in three-dimensional stresses. Compared with existing theories, the new yield criterion has much fewer parameters, which makes it very convenient for practical applications. The coefficients of the criterion are identified by an error minimization procedure. Applications to a Ni₃Al based intermetallic alloy as well as a Cu-Al-Be shape memory alloy and comparison to other criteria show that the proposed criterion has nearly the same predictive ability and flexibility with other criteria. The proposed yield criterion can estimate the coefficients by using less data, which is a big advantage compared with other similar theories, especially when there is a limited number of experimental data.     

航空发动机轴承腔热状态分析模型及温度场计算

分析了轴承腔的主要热源。建立了轴承及石墨密封摩擦热的计算模型、密封热泄漏量的计算模型、对流换热系数的计算模型及温度场的计算模型。用热网络法建立了轴承腔的热平衡方程组,并采用拟牛顿法求解了该方程组。获得了10种不同工况下的温度场计算结果,该结果与本文的测试结果基本吻合。      

1992年10月27日耀斑的多波段观测和分析

利用１９９２年１０月２７日耀斑极为完整的高质量观测资料,通过对可见光、软Ｘ射线和硬Ｘ射线图像和光谱的综合分析,诊断耀斑过程中的热与非热性质,结果表明,在这个事件中,热与非热过程并存且在时空演化上呈现不同的特征     

自适应光学技术补偿镜面温度及自重变形研究

论述了在星载高分辨率相机上采用自适应光学技术的必要性;介绍了应用自适应光学技术补偿镜面温度及自重变形的实验原理,进行了计算机模拟计算,并与实验结果进行比较。实验用一块平面反射镜作为缩比模型,应用６１单元自适应光学系统对其进行了闭环校正实验,分析了泽尼克多项式所对应的像差的校正效果。