星载可展开天线热振动数值分析

根据非耦合动力学理论及有限元方法,研究分析了星载可展开天线的热振动。利用半正弦波温度冲击模拟热动力荷载,对天线典型节点的热振动位移和应力以及形面精度进行了数值分析。研究表明,急剧变化的温度荷载将导致该天线结构发生热振动,热振动响应明显大于静力学响应。     

A comprehensive numerical model investigating the thermal-dynamic performance of scientific balloon

The increase of balloon applications makes it necessary for a comprehensive understanding of the thermal and dynamic performance of scientific balloons. This paper proposed a novel numerical model to investigate the thermal and dynamic characteristics of scientific balloon in both ascending and floating conditions. The novel model consists of a dynamic model and thermal model, the dynamic model was solved numerically by a computer program developed with Matlab/Simulink to calculate the velocity and trajectory, the thermal model was solved by the Fluent program to find out the balloon film temperature distribution and inner Helium gas velocity and temperature field. These models were verified by comparing the numerical results with experimental data. Then the thermal and dynamic behavior of a scientific balloon in a real environment were simulated and discussed in details.     

轴对称锻件成形过程的热力耦合有限元分析技术的研究

锻件成形过程中,非稳态、不均匀的温度场对金属的塑性流动有很大的影响，尤其是高温成形过程。本文对轴对称段件成形过程的热力耦合有限元分析技术进行了研究。论述了刚塑性有限元分析方法，建立了热力耦合分析模型，开发了轴对称锻件成形过程的热力耦合有限元分析软件。通过将圆柱体镦粗过程的模拟结果与有关文献中的实验结果和模拟结果的比较，说明了该方法和软件的正确性。     

发动机气瓶热防护产品绝热性能评定研究

通过批抽检热真空试验,能够评定发动机气瓶热防护产品的绝热性能,由于试验设备和试验工艺过程对产品温升会产生巨大影响,依据绝热材料导热系数测试方法,在试验方法不变的条件下,提出新的试验评定要求:稳态过程中产品温升速率。新的产品测试评定要求,能够客观准确的评定产品的隔热性能,排除设备和工艺过程对评定结果的影响。此评定方法也可用于形状不规则、厚度不一致的整件产品绝热性能评定。     

稀土对电沉积镍基复合镀层高温抗氧化性的影响

研究了稀土加入三种电沉积镍基复合镀层Ni—B_4C、Ni—TiC、Ni—ZrO_2前后,在850℃时的氧化行为。通过金相观察、ESCA(光电子能谱)分析及X射线衍射等方法研究表明:镀层中不同的复合颗粒和稀土两者对镀层的抗氧化能力均有影响。其小不同种类的颗粒对镀层抗氧化能力所产生影响的差别很明显;而稀土对镀层抗氧化能力影响的差别较小,且影响的程度比较接近。另外,两者影响的机理也不同。颗粒是通过分解、扩散等过程改变表面膜的组成来影响的,而稀土则是从提高膜的致密度和膜与基体的粘附性来影响的。作者认为,它们的影响既互相独立,而又互相补充。     

含炔基有机硅杂化聚合物的合成及热稳定性

采用双乙炔基封端的硅氮烷单体(双(4-乙炔基苯胺基) 二苯基硅烷,M1) 与含不同二甲基硅基
结构单元[—Si( CH3 )2—,—Si( CH3 )2—O—Si( CH3 )2—和—Si( CH3 )2—O—Si( CH3 )2—O—Si( CH3 )2—] 的
双溴苯基封端单体进行Sonogashira 交叉偶联反应,制备出一系列含炔基有机硅杂化聚合物。通过红外( FTIR)
、核磁氢谱(1H-NMR) 和凝胶渗透色谱( GPC) 对聚合物的结构和分子量进行了表征,并采用热重分析
(TGA)对聚合物的热性能进行了研究。结果表明,二甲基硅基结构的引入显著提高聚合物的溶解性,各组聚
合物均展现出良好的热稳定性能,其中引入—Si(CH3)2—结构的聚合物具有相对最好的热稳定性。     

Prediction of shock-layer ultraviolet radiation for hypersonic vehicles in near space

A systemic and validated model was developed to predict ultraviolet spectra features from the shock layer of near-space hypersonic vehicles in the ‘‘solar blind" band region. Computational procedures were performed with 7-species thermal non-equilibrium fluid mechanics, finite rate chemistry, and radiation calculations. The thermal non-equilibrium flow field was calculated with a two-temperature model by the finite volume technique and verified against the bow-shock ultra-violet(BSUV) flight experiments. The absorption coefficient of the mixture gases was evaluated with a line-by-line method and validated through laboratory shock tube measurements. Using the line of sight(LOS) method, radiation was calculated from three BSUV flights at altitudes of 38,53.5 and 71 km. The investigation focused on the level and structure of ultraviolet spectra radiated from a NO band system in wavelengths of 200–400 nm. Results predicted by the current model show qualitative spatial agreement with the measured data. At a velocity of 3.5 km/s(about Mach11), the peak absolute intensity at an altitude of 38 km is two orders of magnitude higher than that at 53.5 km. Under the same flight conditions, the spectra structures have quite a similar distribution at different viewing angles. The present computational model performs well in the prediction of the ultraviolet spectra emitted from the shock layer and will contribute to the investigation and analysis of radiative features of hypersonic vehicles in near space.     

陶瓷隔热瓦的缺陷修补

分别采用了MgO、YSZ和Al₂O₃三种陶瓷粉体和一种含隔热瓦本体成分的粉料对陶瓷隔热瓦缺陷进行修补。研究了修补前后材料的微观形貌、力学及隔热性能。结果表明：采用含隔热瓦本体组成的粉料对陶瓷隔热瓦进行修补,修补部位与本体部位相容性好,且微观形貌相似,仍保持纤维搭接的多孔空间网络结构;修补后试样密度0.24 g/cm³、室温热导率0.044 W/（m·K）、压缩强度0.58 MPa;1 200℃、30 min热处理后,修补部位与本体部位结合性好,未出现裂纹、凹陷等缺陷,是有效的缺陷修补方法。     

ZrO2陶瓷热障涂层显微结构及隔热性能研究

用电子束物理气相沉积法(EB-PVD)在DZ125高温合金上制备Y2O3部分稳定化的ZrO2(YSZ)陶瓷热障涂层,并用扫描电镜(SEM)观察涂层显微结构.采用激光脉冲法对EB-PVD热障涂层的热扩散系数进行测试.为防止热扩散系数测试时激光穿透ZrO2陶瓷层,在试样表面制备不同材料的遮挡层.结果表明,EB-PVD热障涂层呈明显的柱状晶结构,柱状晶垂直于涂层/基体界面.基体的热扩散系数随温度的升高而急剧增加,陶瓷热障涂层的热扩散系数随温度的升高呈下降趋势,但变化幅度不大.室温下陶瓷层的热扩散系数小于基体的1/3,1200℃时约为基体的1/67.试样的激光遮挡层很好解决了激光脉冲法测试涂层热扩散系数时的不稳定性和激光穿透问题.在满足遮挡要求的条件下,遮挡层材料种类对热扩散系数测试无明显影响.     

Investigation on the Thermal Conductivity of 3-Dimensional and 4-Directional Braided Composites

It is vital to choose a factual and reasonable micro-structural model of braided composites for improving the calculating precision of thermal property of 3-D braided composites by finite element method (FEM). On the basis of new microstructure model of braided composites proposed recently, the model of FEM calculation for thermal conductivity of 3-dimennsional and 4-directional braided composites is set up in this paper. The curves of coefficient of effective thermal conductivity versus fiber volume ratio and interior braiding angle are obtained. Furthermore, comparing the results of FEM with the available experimental data,the reasonability and veracity of calculation are confirmed at the same time.